User Manual

Checking that Your Oven is Operating Correctly

The following simple procedure enables you to check that your oven is

working correctly at all times. If you are in doubt, refer to the section

entitled “What to Do if You are in Doubt or Have a Problem” on the

page.

✉ The oven must be plugged into an appropriate wall socket. The

turntable must be in position in the oven. If a power level other

than the maximum (100% - 900 W) is used, the water takes

longer to boil.

Open the oven door by pulling the handle on the right side of the door.

Place a glass of water on the turntable. Close the door.

Setting a Standing Time

The Hold Time can be used to set a standing time automatically

(without microwave cooking).

Press the

Start

button and set the time to 4 or 5 minutes, by

pressing the

Start

button the appropriate number of times.

Result: The oven heats the water for 4 or 5 minutes.

The water should then be boiling.

Press the

Hold Timer

button.

Result: The following indication isdisplayed :

(Hold/Delay mode)

Set the grilling time by pressing the

10min,1min

and

10s

buttons .

3. Press Start button.

Result:

The oven beeps when the standing time is over.

jXW]T\nluTWZW^WhniUGGwG^GG~SGqGY]SGYWW\GG_a[YGht