Operation Manual

17
1
Place the protective Styrofoam (cushion) included in the
package on the floor and place the product facing down on
the Styrofoam, as shown in the image.
―
Make sure to use the styrofoam (cushion) that came with the
monitor.
2
Unfasten the two screws on the stand base to remove it.
3
While holding the monitor, lift the stand neck in the direction
of the arrow and adjust it, as shown in the image.
4
While holding the monitor, pull and remove the stand neck in
the direction of the arrow, as shown in the image.
- Caution
Do not press down on the monitor. There is a risk of damaging
the monitor.
Removing the Stand
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.