Specifications

13
ENGLISH
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “12:00”
is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24- hour
or 12-hour notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
Do not forget to reset the clock when you switch to and from summer
and winter time.
1. To display the time
in the...
Then press the
button...
24-hour notation
12-hour notation
Once
Twice
2. Press the ( ) and ( ) buttons to set the hour.
3. Press the button.
4. Press the ( ) and ( ) buttons to set the minute.
5. When the right time is displayed, press the button
to start the clock.
Result: The time is displayed whenever you are
not using the microwave oven.
CHECKING THAT YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to check that your oven is
working correctly at all times. If you are in doubt, refer to the section entitled
“What to Do if You are in Doubt or Have a Problem” on the page.
The oven must be plugged into an appropriate wall socket. The
turntable must be in position in the oven. If a power level other than the
maximum (100% - 900 W) is used, the water takes longer to boil.
Open the oven door by pulling the handle on the right side of the door.
Place a glass of water on the turntable. Close the door.
Press the Start ( ) button and set the time to 4
or 5 minutes, by pressing the Start ( ) button the
appropriate number of times.
Result: The oven heats the water for 4 or 5
minutes.
The water should then be boiling.
CE107V_XEU-03714L-01_EN.indd 13 03/06/2011 12:07:14