Specifications

22
JOHNSON CONTROLS
Form 201.28-NM1.EN.PED/CE (0211)
HANDLING AND STORAGE
LIFTING USING LUGS
Units are provided with lifting holes in the base frame
which accept the accessory lifting lug set (part number
026L00261-000).
The lugs (RH and LH) should be inserted into the
respective holes in the base frame and turned so that the
spring loaded pin engages into the hole and the flanges on
the lug lock behind the hole. The lugs should be attached
to the cables/chains using shackles or safety hooks.
LOCKING PIN
LUG
FLANGE
LIFTING HOLE
IN BASE FRAME
CORRECT
LOCKING PIN
LUG
LIFTING HOLE
IN BASE FRAME
FLANGE
INCORRECT
LOCKING
PIN
FLANGE
LUG
LIFTING USING SHACKLES
The shackles should be inserted into the respective holes
in the base frame and secured from the inside.
67 mm
36 mm
Use spreader bars to avoid lifting chains hitting the
chiller. Various methods of spreader bar arrangements
may be used, keeping in mind the intent is to keep the
unit stable and to keep the chains from hitting the chiller
and causing damage..
Never lift the chiller using a forklift or by
hooking to the top rails. Use only the lifting
holes provided.
Lifting Instructions are placed on a label on the chiller
and on the shipping bag.