Specifications

74
JOHNSON CONTROLS
Form 201.28-NM1.EN.PED/CE (0211)
MICROPANEL
Program Values
Suction Pressure Cutout
PROGRAM DEF LO HI
SUCTION PRESSURE CUTOUT = XX.X PSIG
This message indicates the suction pressure cutout
programmed at the time of the fault.
Low Ambient Cutout
PROGRAM DEF LO HI
LOW AMBIENT TEMP CUTOUT = XX.X °F
This message displays the low ambient temp cutout
programmed at the time of the fault.
Low Leaving Chilled Liquid Temp Cutout
PROGRAM DEF LO HI
LEAVING LIQUID TEMP CUTOUT = XX.X °F
This message displays the low leaving chilled liquid
temperature cutout programmed at the time of the fault.
Motor Current Limit
PROGRAM DEF LO HI
MOTOR CURRENT LIMIT = XXX % FLA
This message indicates the motor current limit
programmed at the time of the fault.
Pulldown Current Limit
PROGRAM DEF LO HI
PULLDOWN CURRENT LIMIT = XXX % FLA
This message indicates the pulldown current limit
programmed at the time of the fault.
Pulldown Current Limit Time
PROGRAM DEF LO HI
PULLDOWN CURRENT LIMIT TIME = XXX MIN
This message indicates the pulldown current limit time
programmed at the time of the fault.
Condenser Subcooling Setpoint
PROGRAM DEF LO HI
SUBCOOLING SETPOINT = XX.X °F
This message indicates the liquid subcooling setpoint
programmed at the time of the fault.
Unit ID Number
PROGRAM DEF LO HI
REMOTE UNIT ID NUMBER = X
This indicates the unit ID # programmed at the time of
the fault.
Sound Limit Setpoint
PROGRAM DEF LO HI
SOUND LIMIT SETPOINT = XXX %
This indicates the sound limit setpoint programmed at
the time of the fault, if the sound limit option is activated
at the factory. If the option is not factory activated, the
display will not appear.
Eductor Differential Temperature
PROGRAM DEF LO HI
EDUCTOR DIFFERENTIAL = XX.X °F
This message indicates the programmed eductor
differential temperature at the time of the fault.
Eductor Safety Time
PROGRAM DEF LO HI
EDUCTOR SAFETY TIME = XXXX MIN
This message indicates the eductor safety time
programmed at the time of the fault.
Motor Temperature Unload
PROGRAM DEF LO HI
MOTOR TEMPERATURE UNLOAD = XXX.X °F
This message indicates the motor temperature
programmed at the time of the fault.