User Manual
8
GB
Installing Your Microwave Oven
This microwave oven can be placed almost anywhere (kitchen work
surface or shelf, movable trolley, table).
☛ Never
block the air vents as the oven may overheat and automatically
switch itself off. It will remain inoperable until it has cooled sufficiently.
☛
For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC
earthed socket. If the power cable of this appliance is damaged, it must be
replaced by the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
☛ Do not
install the microwave oven in hot or damp surroundings like next
to a traditional oven or radiator. The power supply specifications of the
oven must be respected and any extension cable used must be of the
same standard as the power cable supplied with the oven. Wipe the
interior and the door seal with a damp cloth before using your microwave
oven for the first time.
Selecting the Display Language
The first time you plug the power cord into an outlet, or after there has
been an interruption in power, the display shows “HELLO SET
LANGUAGE USING SETDIAL”. At this point, you can select a
language for the display. You can choose from English, French,
Dutch, German, Spanish, Italian and Russian.
1. When you install your oven, make sure there is adequate
ventilation for your oven by leaving at least 10 cm
(4 inches) of space behind, and on the sides of the oven
and 20 cm (8 inches) of space above the oven and 85 cm
(33 inches) of the floor.
2.
Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3.
This microwave oven has to be positioned so that plug is
accessible.
20cm
above
10cm
behind
10cm on
the side
85 cm
of the floor
1. Turn the Set Dial immediately after plugging in your
microwave, or immediately after a power shortage.
Result:
If you continue to turn the Set Dial, the settings
will cycle in the following order:
ENGLISH,FRENCH, DUTCH, GERMAN,
SPANISH, ITALIAN, RUSSIAN.
2.
When you have selected the language and display you want
to use, press the
Select
( ) button to end this procedure.
jlXX\WspiUGGwG_GG{SGqGY`SGYWW[GG_aZ]Ght