00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 1 DVD-VCR CHT-350 Instruction Manual www.samsungvcr.
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 2 Contents Contents (cont.) GB GB ◆ Playing Back ◆ Foreword ■ ■ Safety Instructions ......................................................................................... Disc Type and Characteristics....................................................................... 5 6 ■ ■ ■ ■ Front View of the DVD-VCR .......................................................................... Rear View of the DVD-VCR.........................................
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 4 Contents (cont.) Safety Instructions GB GB The following illustrations represent precautions. ◆ Solving Problems Technical Specifications ................................................................................ Problems and Solutions (VCR)...................................................................... Troubleshooting Guide (DVD) ....................................................................... Schematic Diagram ...................
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 6 Disc Type and Characteristics Front View of the DVD-VCR GB GB This DVD player is capable of playing the following types of discs with the corresponding logos : Disc Types (Logos) Recording Disc Size Types DVD 12 Cm Audio + Video 8 Cm VIDEO-CD 12 Cm Audio + Video AUDIO-CD Max. Playing Time Characteristics Single-sided 240 min. Double-sided 480 min. Single-sided 80 min. Double-sided 160 min.
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 8 Infrared Remote Control Display Indicators GB GB 1 21 2 22 23 3 24 4 25 5 6 26 27 28 7 29 8 9 30 10 11 12 31 32 33 34 13 14 15 16 17 18 19 20 35 36 37 38 39 40 41 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 STANDBY/ON OPEN/CLOSE, EJECT SPEAKER SELECT TEST MODE, REPEAT ANGLE TV VOLUME TV SELECT DVD, VCR, FM/AM, INPUT SELECT REWIND, SKIP BACK STOP DISPLAY SETUP UP
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 10 Deciding How to Connect DVD-VCR Connecting DVD-VCR to the TV using the Coaxial Cable To receive television programmes a signal must be received from one of the following sources: GB ◆ ◆ ◆ ◆ You must take into account various factors when connecting audio or video systems: ◆ Types of connectors available on your systems ◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily (camcorder for example) Your DVD-VCR is
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 12 Connecting Other Equipment to Your DVD-VCR Plug & Auto Set up GB GB You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following illustrations give a few examples of the connection possibilities. ➢ The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as camcorders, VCRs or sound systems.
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 14 Tuning Your Television for the DVD-VCR Deck Control Keys GB GB You must tune your television for the DVD-VCR only if you are not using a RCA cable ➢ 2 To view pictures from your DVD-VCR when a RCA cable is used, the television must be set to the audio/video mode (AV). 1 Switch on the television. 2 Switch on the DVD-VCR by pressing STANDBY/ON on the front of the DVD-VCR or STANDBY/ON on the remote control.
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 16 Copying from DVD to VCR GB The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision® encoded DVDs. 1 1 Insert Disc Insert the disc you wish to copy in the DVD deck and close the drawer. 2 Insert VHS Tape Insert a blank VHS videotape into the VCR deck.
00096T DVD-CHT350/XST-GB1 6/16/03 1:17 PM Page 18 Menu Language GB 1 Open “MAIN MENU” With the DVD in stop mode, press the SETUP button. 2 Set “Language” Using the , ❷ and ➛, ❿ buttons, move the selection arrow to Language set then press ENTER button. 1 3 Set menu Language Move the selection bar to your desired Language, then press ENTER button.
00096T DVD-CHT350/XST-GB2 6/16/03 1:18 PM Page 19 VCR Presetting the Stations Automatically GB ☛ You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 13). MAIN MENU Your DVD-VCR contains a built-in tuner used to receive television broadcasts. You must preset the stations received through the tuner.
00096T DVD-CHT350/XST-GB2 VCR 6/16/03 1:18 PM Page 20 Presetting the Stations Manually ☛ GB VCR Clearing a Preset Station GB You do not need to preset the stations manually if you have already set them automatically. If you have stored a TV station: ◆ That you do not require MAIN MENU INSTALLATION RETURN ❷ ➛ ❿ ENTER INSTALLATION AUTO SET UP MANUAL SET UP TV SYSTEM VCR OUTPUT CH :G :CH36 TV STATION TABLE ❷ Press the SETUP button on the remote control.
00096T DVD-CHT350/XST-GB2 VCR 6/16/03 1:18 PM Page 22 Changing the Preset Station Table VCR Selecting the RF OUT Sound Mode (B/G-D/K) GB GB You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences. You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR. MAIN MENU MAIN MENU 1 Press the SETUP button on the remote control. 2 Press the corresponding INSTALLATION option.
00096T DVD-CHT350/XST-GB2 VCR 6/16/03 1:18 PM Before recording or playing back a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO. MAIN MENU ➢ ◆ ◆ USER SET ❷ ➛ ❿ ENTER USER SET COLOUR SYSTEM NICAM IPC AUTO POWER OFF LINE3 AUDIO :AUTO :ON :ON :OFF :RCA AUTO PAL MESECAM B/W RETURN 2 Press the corresponding , ❷ or ➛, ❿ buttons to select the USER SET option.
00096T DVD-CHT350/XST-GB2 VCR 6/16/03 1:18 PM Page 26 Auto Power Off VCR Selecting the Cassette Type GB GB The Auto Power Off feature automatically turns off your DVD-VCR if no signal is received and you do not press any button for the selected time. MAIN MENU USER SET RETURN ❷ ➛ ❿ 2 Press the corresponding , ❷ or ➛, ❿ buttons to select the VCR FUNCTION SETUP option. 3 Press the ENTER button to select this option. Press the ENTER button to select this option.
00096T DVD-CHT350/XST-GB2 VCR 6/16/03 1:18 PM Page 28 Displaying/Hiding On-Screen Information VCR Protecting a Recorded Cassette GB GB Your DVD-VCR displays most information both on the DVD-VCR and the television. You can choose to display or hide this information on the television screen (except for the Index, MAIN MENU and Timer functions, which cannot be hidden). MAIN MENU 1 Press SETUP on the remote control. Result: The MAIN MENU is displayed.
00096T DVD-CHT350/XST-GB2 VCR 6/16/03 1:18 PM Page 30 Recording a Programme with Automatic Stop VCR Using the Timer Programming Feature GB GB This function enables you to record up to nine hours (LP) of programmes. Your DVD-VCR stops automatically after the requested length of time. 1 Switch on the television. 2 To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).
00096T DVD-CHT350/XST-GB2 VCR 6/16/03 1:18 PM Page 32 Checking a Preset Recording VCR Playing a Cassette GB GB This function allows you to play back any pre-recorded cassette. You can check your preset recordings: PR 1 ----- ❷ 1/JAN TUE 12:09 DAY START→STOP SA 9 12:00→12:50SP ---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:---➛❿ RETURN DELETE:CLEAR ◆ When you have finished presetting the DVD-VCR 1 Switch on both the television and your DVD-VCR.
00096T DVD-CHT350/XST-GB2 VCR 6/16/03 1:18 PM Page 34 Selecting the Audio Output Mode VCR Playing a Sequence Frame by Frame GB GB You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available. Option L R L Used to listen to the sound on the left Hi-Fi channel. R Used to listen to the sound on the right Hi-Fi channel. MIX Used to listen to the mixed sound of the Hi-Fi and normal channels.
00096T DVD-CHT350/XST-GB3 VCR 6/16/03 1:18 PM Page 36 Picture Search, Fast Forward/Rewind VCR Using the Tape Counter Picture Search enables you to Fast Forward or Rewind and look for a particular part of a tape. GB 1 Press PLAY, the VCR will enter normal play mode. While in play, press and release the ❿❿ (or ➛➛ ) button. The VCR will search at 5 times the normal playback speed. 2 To return to normal playback mode, press the ❿II button.
00096T DVD-CHT350/XST-GB3 VCR 6/16/03 1:18 PM Page 38 Connecting an RCA Audio/Video Input Cable GB You can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available on the equipment chosen. 1 3 3 1 Insert the cassette to be edited in your DVD-VCR. 2 Press the ❿ll button to start playback. 3 When you reach the position from which you wish to start the new recording, press the ❿ll button.
00096T DVD-CHT350/XST-GB3 VCR 6/16/03 1:19 PM Page 40 Audio Dubbing a Pre-recorded Cassette VCR Using the TV Buttons on the Remote Control GB GB With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from: ◆ A CD, DVD ◆ A microphone connected to a sound system ◆ A cassette player Restriction: Audio dubbing is applicable only to the longitudinal audio track (normal audio). 1 2 Switch your television on.
00096T DVD-CHT350/XST-GB3 VCR 6/16/03 1:19 PM Page 42 SQPB (Super VHS Quasi Playback) DVD Choosing a Connection GB GB This function is for playback of Super VHS format tapes only, not for recording. 3 1 Inset the SVHS format tape that you want to see. 2 Press PLAY (❿ll ) to start playing the cassette. 3 Press SVHS button to start SQPB. ☛ The following show examples of connections commonly used to connect the DVD-VCR with a TV and other components. It is only available for DVD.
00096T DVD-CHT350/XST-GB3 DVD 6/16/03 1:19 PM Page 44 Using the Setup Menu DVD Using the Disc Menu Language GB GB The Setup menu lets you customize your DVD-VCR by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have. MAIN MENU 1 1 With the unit in Stop mode, press the SETUP button on the remote. Result: The MAIN MENU is displayed. With the unit in Stop mode, press the SETUP button on the remote.
00096T DVD-CHT350/XST-GB3 DVD 6/16/03 1:19 PM Page 46 Setting Up the Audio Language Features GB DVD Setting Up the Parental Control GB MAIN MENU Using the Audio Language: 1 With the unit in Stop mode, press the SETUP button on the remote. Result: The MAIN MENU is displayed. 2 Press the corresponding , ❷ or ➛, ❿ buttons to select the DVD option. 1 3 With the unit in Stop mode, press the SETUP button on the remote. Result: The MAIN MENU is displayed.
00096T DVD-CHT350/XST-GB3 DVD 6/16/03 1:19 PM Page 48 Setting Up the Audio Options DVD Setting Up the Display Options GB GB MAIN MENU DVD SETUP RETURN ❷ ➛ ❿ 1 With the unit in Stop mode, press the SETUP button on the remote. Result: The MAIN MENU is displayed. 1 With the unit in Stop mode, press the SETUP button on the remote. Result: The MAIN MENU is displayed. 2 Press the corresponding , ❷ or ➛, ❿ buttons to select the DVD option.
00096T DVD-CHT350/XST-GB3 DVD 6/16/03 1:19 PM Page 50 S-Video Connections (for DVD) DVD Special Playback Features GB GB The S-Video is only for the DVD player. The tuner and VCR will still be viewed through the RF or line inputs. You must follow the “DVD Out” instructions on page 49 to activate your alternative (S-Video) video selection. If your television is equipped with S-Video input, you can enjoy superior video quality when watching DVDs with your DVD-VCR.
00096T DVD-CHT350/XST-GB3 DVD 6/16/03 1:19 PM Page 52 Using the Display Function (DVD/VCD/CD) GB When Playing a DVD DVD 1 During play, press the DISPLAY button on the remote. - Current title, chapter number, elapsed time, audio and subtitle will be displayed. • Use the NUMBER buttons to enter a different title, then press the ENTER button. • Use the ➛, ❿ or NUMBER buttons to enter a chapter number, then press the ENTER button.
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 53 DVD Repeat Play GB Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. 1 Press the REPEAT button on the remote. Repeat screen appears. 2 Select Chapter, Title or A-B using the ➛ or ❿ buttons. 1 - Repeat A-B • Press the REPEAT button. Select A-B on screen with the ➛ or ❿ buttons on the remote. • Press ENTER at the point where you want the repeat play to start (A). The B is automatically highlighted.
00096T DVD-CHT350/XST-GB4 DVD 6/16/03 1:19 PM Page 54 Program Play (CD) DVD SCREEN FIT Play GB GB 1 PROGRAM RANDOM 1 Press the MODE button. 2 Use the ➛ or ❿ buttons to select PROGRAM. Press the ENTER button. 3 Use the ➛ or ❿ buttons to select the first chapter (or track) to add to the program. Press the ENTER button. The selection numbers appear in the Program Order box. 4 Press the PLAY/STILL button. The disc will be played in programmed order.
00096T DVD-CHT350/XST-GB4 DVD 6/16/03 1:19 PM Page 56 Selecting the Audio Language (Using the Audio button) DVD Changing the Camera Angle GB GB You can select a desired language quickly and easily with the AUDIO button. 1 Press the AUDIO button. 2 Use the or ❷ buttons to select the desired language on a DVD. - The audio languages are represented by abbreviations. 1 When a DVD contains multiple angles of a particular scene, you can select the Angle function.
00096T DVD-CHT350/XST-GB4 DVD 6/16/03 1:19 PM Page 58 Using the Bookmark Function (DVD/VCD) DVD Using the Zoom (DVD/VCD) GB GB The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you can quickly find the section at a later time. DVD 1 During play, press the MARK button on the remote. The Bookmark icons will be displayed. 2 Use the ➛ or ❿ buttons to move to the desired bookmark icon. 3 When you reach the scene you want to mark, press the ENTER button.
00096T DVD-CHT350/XST-GB4 DVD 6/16/03 1:19 PM Page 60 MP3 Play DVD MP3 Play (CD-R MP3 disc requirements) GB GB When an MP3 Disc is inserted into the DVD-VCR, the first song file of the first folder plays. MP3 Total : 3 ~ song1 RETURN ❷ MP3 RETURN ❷ Press STOP to stop playback of the first song file, then press RETURN to display the music folder menu on the right side of the screen. Up to 8 music folders can be displayed at a time.
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 62 Connecting the FM and AM antennas Connecting the Speakers GB GB Connect the front, center, and surround speakers and the subwoofer to the speaker terminals on the back of the main unit. 1 FM antenna connections • Connect the FM antenna to the FM 75Ω COAXIAL terminal. • Unwind the antenna wire and then fasten it to a wall in an area where reception is best. - If reception is poor, connect the outdoor antenna.
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 64 LINE 3 AUDIO Setting Speaker setup GB GB 1 1 2 USER SET RETURN ❷ ➛ ❿ 3 ENTER 2 3 Select “Audio Options” Move the selection bar to “Audio Options”, then press ENTER to options. Select “LINE3 AUDIO” Move the selection arrow to “LINE3 AUDIO”, then press right to select from the following options.
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 66 Speaker setup Dolby Pro Logic II decoder GB GB To adjust the speaker balance 1 1 Press the SPEAKER button. • Each time you press the button, the speaker is selected in the order of FL➝ C ➝ FR ➝ SR ➝ SL ➝ SW ➝ VOL. You will see this on the unit's display. 2 2 Use the + and - buttons to adjust the volume on the desired speaker.
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 68 Listening to radio broadcasts SOUND mode/effect function GB GB This feature simulates the sound of different acoustic spaces. 1 1 Press the SOUND MODE button. PL II • Each time you press the button, the sound mode changes as follows. NATURAL You can automatically or manually tune in to FM and AM stations to listen to radio broadcasts. 1 • Each time you press the button, the band alternates between FM and AM.
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 70 Technical Specifications GB GB General Rated voltage AC 220 - 240V, 50Hz FRONT SPEAKER 50W X 2 (6Ω) Operating ambient temperature +5°C ~ +35°C CENTER SPEAKER 50 W (6Ω) Installation conditions Operation position : Horizontal, AMP Relative humidity : Below 75% Input Output RCA jack : 1.0Vp-p (unbalanced) 75Ω FREQ.
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 72 Problems and Solutions (VCR) Troubleshooting Guide (DVD) GB GB Before contacting the Samsung after-sales service, perform the following simple checks. Problem No power Explanation/Solution ◆ ◆ Check that the power plug is connected to a wall outlet. Have you pressed the STANDBY/ON button? You cannot insert a video cassette ◆ A video cassette can only be inserted with the window side up and the safety tab facing you.
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 74 S.M.P.S-2 S.M.P.
6/16/03 1:19 PM Page 76 Volume Function-Timer 00096T DVD-CHT350/XST-GB4
6/16/03 1:19 PM Page 78 Syscon/Servo Power Drive 00096T DVD-CHT350/XST-GB4
6/16/03 1:19 PM Page 80 Hi-Fi A/V 00096T DVD-CHT350/XST-GB4
6/16/03 1:19 PM Page 82 TM OSD/YPS/PDC 00096T DVD-CHT350/XST-GB4
6/16/03 1:19 PM Page 84 Input-Output AM/FM Receiver 00096T DVD-CHT350/XST-GB4
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 86 DVD Micom A2/NICAM Repair Zoran Program Board
6/16/03 1:19 PM Page 88 DVD Servo DVD AV Decoder 00096T DVD-CHT350/XST-GB4
6/16/03 1:19 PM Page 90 DVD Audio/Video Interface DVD Servo 00096T DVD-CHT350/XST-GB4
00096T DVD-CHT350/XST-GB4 6/16/03 1:19 PM Page 92 Digital Amp THIS APPLIANCE IS DISTRIBUTED BY www.samsung.
