User Manual

GB
23
GB
22
Changing the Preset Station Table
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1 Press the SETUP button on the remote control.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the ENTER button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding  or ❷ buttons, until the MANUAL SET
UP option is selected.
5 Press the ENTER button to select this option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding  or ❷ buttons, until the required preset
TV programme is selected.
Result
: The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station press the
ENTER button on the remote control (For example; To move a TV
station in programme 1 to programme 3).
8 You can modify this station by repeating the same procedure from
Step
6 onwards.
9 On completion, press the RETUTN button three times to exit the
menu.
TV STATION TABLE
PR CH NAME DEC
1 003 --- OFF
2
3
4
5
❷ ❿
SWAPPING:ENTER
RETURN DELETE:CLEAR
TV STATION TABLE
PR CH NAME DEC
1
2
3 003 --- OFF
4
5
❷ ❿
SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN
❷ ➛❿ ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
❷
ENTER
VCR
Clearing a Preset Station
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 Press the SETUP button on the remote control.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the ENTER button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding  or ❷ buttons, until the MANUAL SET
UP option is selected.
5 Press the ENTER button to select this option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding  or ❷ buttons, until the required preset
TV station is selected. (
PR)
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button three times to exit the
menu.
MAIN MENU
INSTALLATION
RETURN
❷ ➛❿ ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
❷
ENTER
TV STATION TABLE
PR CH NAME DEC
1 003 --- OFF
2
3
4
5
❷ ❿
SWAPPING:ENTER
RETURN DELETE:CLEAR
VCR
00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 22