User Manual

GB
27
GB
26
ShowView EXTEND
To prevent delays or over-runs the VCR has a function called
ShowView EXTEND allowing you to extend the recording time by
up to 60 minutes.
➢ Only use if PDC is not available or set to OFF.
1 Press the SETUP button on the remote control.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result
: The USER SET menu is displayed.
4 Press the corresponding  or ❷ buttons, until the
SHOWVIEW EXTEND option is selected.
5 Press ➛ or ❿ buttons to set the ShowView EXTEND time by
increments of 10 minutes.
6 To turn off, press ➛ or ❿ buttons repeatedly until OFF shows.
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
SHOWVIEW EXTEND :OFF
AUX AUDIO :RCA
RETURN
➛❿ ❷
OFF
10
60
MAIN MENU
USER SET
RETURN
❷ ➛❿ ENTER
VCR
Intelligent Picture Control
Auto Power Off
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the SETUP button on the remote control.
Result
: The MAIN MENU is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result
: The USER SET menu is displayed.
4 Press the corresponding  or ❷ buttons, until the IPC option is
selected.
5 Press the ❿ button to select the IPC (intelligent picture control)
option.
➢ When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
6 To adjust the sharpness manually, press the ❷
button to turn the
IPC mode
OFF
.
7 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢ If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8 On completion, press the RETURN button again.
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1 Press SETUP on the remote control.
Result
: The MAIN MENU is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result
: The USER SET menu is displayed.
4 Press the corresponding  or ❷ buttons, until the AUTO POWER
OFF option is selected.
5 Press the ❿ button, until you select the time of Auto Power off
interval.
OFF 2HOUR 3HOUR
6 On completion, press RETURN twice to exit the menu.
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
SHOWVIEW EXTEND :OFF
AUX AUDIO :RCA
RETURN
❷  ➛❿
ON
OFF
MAIN MENU
USER SET
RETURN
❷ ➛❿ ENTER
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
SHOWVIEW EXTEND :OFF
AUX AUDIO :RCA
RETURN
❷   ➛❿
OFF
2HOUR
3HOUR
MAIN MENU
USER SET
RETURN
❷ ➛❿ ENTER
VCR
VCR
00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 26