User Manual

GB
71
GB
70
Example: Storing an FM station of 89.1 MHz into the preset number
02 of the FM1 band
1 Press the FM/AM button to select the FM band.
Each time you press the button, the band alternates between
FM and AM.
2 Select a channel to choose the memory address to which you want
to store the station.
3 Use the
➛➛
and
buttons to tune in to 89.1 FM.
4 Press the
button or the ENTER button on the remote control.
89.1 FM is stored in FM1.
5 Select a channel to select a preset station number.
6 Press the
STOP button or ENTER button again to store FM
station 89.1 to FM 1.
7 To store other stations Repeat steps 1 to 6 above.
You can use the CHANNEL button to store up to 20 FM stations
and 10 AM stations.
will be indicated when tuned to an FM station.
To store other channels, repeat the steps 2 to 4 above.
You can automatically or manually tune in to FM and AM stations
to listen to radio broadcasts.
1 Press the FM/AM button.
Each time you press the button, the band alternates between
FM and AM.
2 Tune in to a station.
Automatic tuning : Hold down
l
➛➛
/
l
to begin the
automatic tuning.
Manual tuning : Press
l
➛➛
to tune in to a lower frequency, or
press
l
to tune in to a higher frequency.
The FM/AM function cannot be selected while operating the
DVD player or VCR.
Listening to radio broadcasts
Presetting stations
1
2
2
1
2
3
3
4
SOUND mode/effect function
This feature simulates the sound of different acoustic spaces.
1 Press the SOUND MODE button.
Each time you press the button,
the sound mode changes as
follows.
The SOUND mode adds a coustic
surround effect during playback of
stereo analog or linear PCM digital
signals.
2 Press the SOUND EFFECT button.
• Each time you press the button, the selection alternates between
EFFECT 1 and EFFECT 2.
• The higher the number, the greater the effect.
• If you press the button while in the STEREO mode, the selection
alternates between STEREO snd 4 Stereo.
1
2
PL II
NATURAL
JAZZ
CONCERT
STADIUM
Dolby Pro Logic II
: 5.1ch
: STEREO
ON
Mode
PL II STEREO NATURAL JAZZ CONCERT STADIUM
Video Tape
TV, FM/AM
AUX
OPTICAL
(PCM)
Source
OFF
The Sound mode and effects do not Work With Dolby Digital, DTS, VCD, MP3, LPCM
disc, and Optical Input(OPTICAL) sources.
Dolby Digital, DTS, Optical Input (Dolby Digital) : 5.1-Channel speaker output
VCD, MP3, LPCM, Optical Input (PCM) : Outputs to the front left, right, and subwoofer
speakers only.
During DTS or MPEG playback, audio is output only to the speakers.
Audio is not output using other connections.
00096X DVD-CM350/AFR-GB4 6/26/03 3:57 PM Page 70