User Manual (ver.1.00)

Wireless network setup

227

2. Using a Network-Connected Machine

Wireless network set up is completed. After the installation is finished,

click Quit.

After completing the wireless network connection, you need to install a

machine driver to print from an application (see "Installation for Mac" on

page 175).

Ad hoc via USB cable

If you do not have an access point (AP), you may still connect the machine

wirelessly to your computer by setting up an ad hoc wireless network by

following these simple directions.

Items to prepare

• Network-connected computer

• Software CD that was provided with your machine

• A machine installed with a wireless network interface

• USB cable

Creating the ad hoc network in Mac

For Mac OS X 10.4, you need to download from the Samsung website to

install the printer software (http://www.samsung.com > find your product >

Support or Downloads).

Make sure that the machine is connected to your computer and

powered on.

Insert the supplied software CD into your CD-ROM drive.

Double-click the CD-ROM icon that appears on your Mac desktop.

• For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.

Double-click the MAC_Installer folder > Installer OS X icon.

Click Continue.

Read the license agreement and click Continue.

Click Agree to agree to the license agreement.