User Manual (ver.1.00)

Using USB memory device

2. Menu Overview and Basic Setup

Scanning to a USB memory device

• Accessing menus may differ from model to model (see "Accessing the

menu" on page 36 or "Control panel overview" on page 26).

• It may be necessary to press OK to navigate to lower-level menus for

some models.

You can scan a document and save the scanned image onto a USB memory

device.

Scanning

Insert a USB memory device into the USB memory port on your machine.

Place a single document face down on the document glass, or load the

documents face up into the document feeder (see "Loading originals" on

page 61).

Select (scan) > Scan To USB > OK on the control panel.

Or select Scan > USB > Next > Start on the touch screen.

The machine begins scanning.

After scanning is complete, you can remove the USB memory device from the

machine.

Customizing Scan to USB

You can specify image size, file format, or color mode for each scanning to USB

job.

Select (scan) > (Menu) > Scan Feature > USB Feature on the

control panel.

Or select Scan to > (Menu) > Scan Feature > USB Feature on the

control panel.

Or select Direct USB > Scan to USB > (settings) on the touch screen.