CLX-6220 Series CLX-6250 Series Multi-Functional Printer User’s Guide imagine the possibilities Thank you for purchasing a Samsung product.
copyright © 2009 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • • • • • • • Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. PCL and PCL 6 are trademarks of Hewlett-Packard Company.
safety information These warnings and precautions are included in order to prevent injury to you and others, as well as preventing any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and instructions marked on the machine and in the accompanying literature.
If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off the power switch and unplug the machine. ► This could result in electric shock or fire. Caution During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet. ► This could result in electric shock or fire. If the plug does not easily enter the electrical outlet, do not attempt to force it in.
Installation / Moving Warning Do not place the machine in an area with dust, humidity or water leaks. ► This could result in electric shock or fire. Caution When moving the machine, turn the power off and disconnect all cords; then lift the machine with at least two people. ► The machine could fall, causing human injury or machine damage. Do not put a cover over the machine or place it in an airtight location, such as a closet. ► If the machine is not well-ventilated, this could result in fire.
Keep the power cable and the contact surface of the plug clean from dust or water. ► This could result in electric shock or fire. To clean and operate the machine, strictly follow the user's guide provided with the machine. ► Otherwise, it can cause damage to the machine. Do not remove any covers or guards that are fastened with screws. ► The machine should only be repaired by Samsung service technician. Supply usage Caution Do not disassemble the toner cartridge. ► Toner dust can be dangerous to humans.
regulatory information This machine is certified with several regulatory statements. Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1:1993 + A1:1997 + A2:2001. Class I laser products are not considered to be hazardous.
Ozone Safety During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, request your nearest Samsung dealer. Mercury Safety Contains Mercury, Dispose According to Local, State or Federal Laws. (U.S.A.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
UNITED STATES OF AMERICA Federal Communications Commission (FCC) Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Russia only Fax Branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the following information: 1. the date and time of transmission 2. identification of either business, business entity or individual sending the message; and 3.
You should also know that: • • Your machine is not designed to be connected to a digital PBX system. If you intend to use a computer modem or fax modem on the same phone line as your machine, you may experience transmission and reception problems with all the equipment. It is recommended that no other equipment, except for a regular telephone, share the line with your machine.
Declaration of Conformity (European Countries) Approvals and Certifications The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/68/EEC Directives of the European Union as of the dates indicated: Hereby, Samsung Electronics declare that this product is in compliance with the essential requirements and other relevant provisions of: R&TTE Directive (1999/5/EC) The declaration of conformity may be consulted at www.samsung.
REGULATORY COMPLIANCE STATEMENTS Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young(eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).
China only Regulatory information_ 10
about this user’s guide This user’s guide provides information about how to use the machine. Both novice and professional users can refer to this as a guide for installing and using the machine. •Read the safety information before using the machine. •If you have a problem using the machine, refer to the troubleshooting chapter (See "Troubleshooting" on page 1). •Terms used in this user’s guide are explained in the glossary chapter (See "Glossary" on page 1).
Finding more information You can find information for setting up and using your machine from the following resources, either as a print-out or on screen. Material name Description Quick Install Guide This guide provides basic information on setting up your machine. User’s Guide This guide provides you with step-by-step instructions for using your machine’s full features, and contains information for maintaining your machine, troubleshooting and replacing supplies.
features of your new product Your new machine is equipped with a number of special features that improve the quality of the documents you print. Special Features Print with excellent quality and speed • • • • You can print in a full range of colors using cyan, magenta, yellow, and black. You can print with a resolution of up to 9,600 x 600 dpi effective output. CLX-6220 Series prints up to 20 ppm, A4-sized paper or up to 21 ppm, letter sized paper.
IPv6 This machine supports IPv6. Features by Models The machine is designed to support all of your document needs from printing and copying to more advanced networking solutions for your business. Some features and optional goods may not be available depending on models or countries. Features by models include: FEATURES CLX-6220 Series CLX-6250 Series USB 2.0 ● ● USB Memory Interface ● ● Document Feeder ● ● Hard Disk ○ Network Interface Ethernet 10/100 BaseTX wired LAN Network Interface 802.
introduction 1. This chapter gives you an overview of your machine: This chapter includes: • • Machine overview Control panel overview • • Understanding the Status LED Introducing the useful buttons Machine overview Front view 1 Document feeder cover 12 Front door 9 Optional tray 2a 20 Scanner glass 2 Document feeder width guides 13 Document output tray 10 Tray 1 21 Scan unit 3 Document feeder input tray 14 Control panel 11 Multi-purpose tray 22 Inner cover of the reverse unit.
Rear view 1 Control board cover 7 Extension telephone socket (EXT) 2 Rear door 8 Telephone line socket 3 Cable organizer 9 Optional tray 2 cable connector 4 Power receptacle 10 Network port 5 Power-switch 11 USB port 6 Handle 12 IEEE 802.11 b/g Wireless LANa a. Optional device.
Control panel overview 1 ID Copy You can copy both sides of an ID Card such as a driver’s license to a single side of paper (See "ID card copying" on page 2). 2 Direct USB Allows you to directly print files stores on a USB memory device when it is inserted into the USB memory port on your machine (See "About USB memory device" on page 1). 3 Duplex Allows you to print documents on both sides of the paper. 4 Display screen Shows the current status and prompts during an operation.
20 Start Starts a job in black or color mode.
Understanding the Status LED Introducing the useful buttons The color of the Status indicates the machine's current status. Menu button Status Off Green Blinking Description • The machine is off-line. • When the backlight slowly blinks, the machine is receiving data from the computer. When the backlight blinks rapidly, the machine is printing data. • Red On The machine is on-line and can be used.
getting started 1. This chapter gives you step-by-step instructions for setting up the USB connected machine and software. This chapter includes: • • • Setting up the hardware Printing a demo page Supplied software Setting up the hardware This section shows the steps to set up the hardware, as is explained in the Quick Install Guide. Make sure you read the Quick Install Guide first and follow the steps below: 1. Select a stable location.
OS Windows Contents • • • • • • • • • • Macintosh • • • • • • Linux • • • • • • UNIX • Printer driver: Use this driver to take full advantage of your machine’s features. PostScript Printer Driver: Use the PostScript driver to print documents with complex fonts and graphics in the PS language. (PostScript printer description file is included.) Scanner driver: TWAIN and Windows Image Acquisition (WIA) drivers are available for scanning documents on your machine.
Installing USB connected machine’s driver Macintosh Requirements (recommended) OPERATING SYSTEM Mac OS X 10.3 ~ 10.4 CPU • • Mac OS X 10.5 • • Mac OS X 10.6 • RAM Intel Processors PowerPC G4/ G5 • Intel Processors 867 MHz or faster Power PC G4/ G5 512 MB (1 GB) Intel Processors 1 GB (2 GB) • 128 MB for a PowerPC based Mac (512 MB) 512 MB for a Intel-based Mac (1 GB) free HDD space 1 GB Only use an USB cable no longer then 3 m (10 ft. ).
Installation and Install Software Only. The Custom Installation allows you to select the machine’s connection and choose individual components to install. The Install Software Only allows you to install the supplied software, such as Smart Panel. Follow the instruction in the window. •Administrator Installation provides convenient installation methods useful for administrators (See "Administrator’s Guide (Windows only)" on page 1). 4.
install. 11. When the message which warns that all applications will close on your computer appears, click Continue. 12. Select Typical installation for a local printer and then click OK. If you select Typical installation for a network printer during the machine driver installation, the SetIP program automatically runs. If the machine has already configured network infomation, close the SetIP program. Go to the next step. 13. After the installation is finished, click Quit. 14.
a)Make sure that the machine is connected to your computer and powered on. b)When the Administrator Login window appears, type in “root” in the Login field and enter the system password. You must log in as a super user (root) to uninstall the printer driver. If you are not a super user, ask your system administrator. c)Click the icon at the bottom of the desktop. When the Terminal screen appears, type in: [root@localhost root]#cd /opt/Samsung/mfp/uninstall/ [root@localhost uninstall]#./uninstall.
network setup 1. This chapter gives you step-by-step instructions for setting up the network connected machine and software. This chapter includes: • • • • • Network environment Introducing useful network programs Using a wired network Network environment SyncThru™ Web Service You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic network settings through the machine's control panel.
5. Press OK when Yes highlights to confirm printing. The Network Configuration Report prints. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: • MAC Address : 00:15:99:41:A2:78 • IP Address : 192.0.0.192 Setting IPv4 address You must set up an IPv4 address for network printing and management. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network.
Restoring factory default settings using SyncThru™ Web Service 3.Click the Firewall menu. 4.Turn the firewall off. The following instructions may vary for your model. Perform the following to configure the IP address: 1.Connect your machine and the computer using network cable. 2.Insert the Installation CD-ROM, and open the disk window. Open the MAC_Installer > MAC_Printer > SetIP > SetIPApplet.html. 3.Double click the file and Safari will automatically open, then select Trust.
3. Select Install now. window will appear. If necessary, select a language from the drop-down list. •For CLX-6250 Series installation window, you can see Wireless Setting and Installation menu. You can use this menu if an optional wireless network card is installed and/or the machine is connected to your computer with a USB cable. Install the optional wireless network card.
9. Click Finish. •After the driver setup, you may enable firewall. •If the printer driver does not work properly, follow the steps below to repair or reinstall the driver. a)Make sure that the machine is connected to your machine and powered on. b)From the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Maintenance. c)Select the option as you wish, follow the instruction on the window. •For Mac OS X 10.
Installing the UNIX printer driver package 4.Specify any printer description in the Description field. This is optional. 5.Specify printer location in the Location field. 6.Type the IP address or DNS name of the printer in the Device textbox for network-connected printers. On IBM AIX with jetdirect Queue type only DNS name is possible, numeric IP address is not allowed. 7.Queue type shows the connection as lpd or jetdirect in the corresponding list box. Additionally usb type is available on Sun Solaris OS.
Setting IPv6 addresses Connecting SyncThru™ Web Service Machine supports following IPv6 addresses for network printing and managements. • Link-local Address: Self-configured local IPv6 address. (Address starts with FE80.) • Stateless Address: Automatically configured IPv6 address by a network router. • Stateful Address: IPv6 address configured by a DHCPv6 server. • Manual Address: Manually configured IPv6 address by a user. 1.
basic setup 1. After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter gives you step-by-step instructions for setting up the machine.
1. Press On Hook Dial. A dial tone sounds from the earpiece. 2. Press the left/right arrow until you hear the volume you want. 3. Press On Hook Dial to save the change and return to ready mode. 6. Press OK to save the selection. 7. Press Stop/Clear to return to ready mode. Changing the clock mode You can set your machine to display the current time using either a 12-hour or 24-hour format. 1. Press Menu on the control panel. 2. Press the up/down arrow to highlight System Setup and press OK. 3.
Paper substitution Correcting numbers or names If you make a mistake while entering a number or name, press the left/right arrow button to delete the last digit or character. Then enter the correct number or character. Inserting a pause With some telephone systems, you must dial an access code (9, for example) and listen for a second dial tone. In such cases, you must insert a pause in the telephone number. You can insert a pause while you are setting up speed dial numbers.
4.Press the up/down arrow to highlight Paper Size and press OK. 5.Press the up/down arrow to select the paper tray you want and press OK. 6.Press the up/down arrow to select the paper size you want. 7.Press OK to save the selection. 8.Press Stop/Clear to return to ready mode. 1.Open a Macintosh application and select the file you want to print. 2.Open the File menu and click Print. 3.Go to Paper Feed pane. 4.Set appropriate tray from which you want to print. 5.Go to Paper pane. 6.
media and tray 1. This chapter provides information on how to load originals and print media into your machine. This chapter includes: • • • • • • • • Preparing originals Loading originals Selecting print media Changing the tray size Preparing originals • • • • • • Loading paper in the tray Printing on special media Setting the paper size and type Selecting an output location 1. Lift and open the scanner lid. Do not load paper smaller than 142 x 148 mm (5.6 x 5.
Selecting print media •Be careful not to break the scanner glass. You may get hurt. •Do not put hands while closing the scanner lid. The scanner lid may fall on your hands and get hurt. •Do not look the light from inside of the scanner while copying or scanning. It is harmful to eyes. You can print on a variety of print media, such as plain paper, envelopes, labels. Always use print media that meet the guidelines for use with your machine.
Changing the tray size jams. The tray is preset to Letter or A4 size, depending on your country. To change the size, you need to adjust the paper guides. Loading paper in the tray Tray 1/optional tray 2 1 Tray extend lever 2 Paper length guide 3 Paper width guide 1. Hold the tray with one hand, and with the other hand squeeze and slide the paper length guide to locate them in the correct paper size slot marked at the bottom of the tray.
Paper quantity indicator shows the amount of paper in the tray. 1.Grab the handle of multi-purpose tray and pull it down to open. 2.Flex or fan the edge of the paper stack to separate the pages before loading papers. 1 Full 2 Empty 4. When you print a document, set the paper type and size for the tray. For information about setting the paper type and size on the control panel (See "Setting the paper size and type" on page 7). 3.Load the paper with the side to be printed on facing down.
5.When you print a document, set the paper type and size for the multi-purpose tray. For information about setting the paper type and size on the control panel (See "Setting the paper size and type" on page 7). The settings made from the machine driver override the settings on the control panel. a)To print in application, open an application and start the print menu. b)Open Printing Preferences (See "Opening printing preferences" on page 2).
• • • 1 Acceptable 2 Unacceptable Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the machine’s fusing temperature about 170°C (338 °F) for 0.1 second. The extra flaps and strips might cause wrinkling, creasing, or jams and may even damage the fuser. For the best print quality, position margins no closer than 15 mm from the edges of the envelope. Avoid printing over the area where the envelope’s seams meet.
• • machine’s fusing temperature for 0.1 second. Check your machine’s specification to view the fusing temperature about 170°C(338 °F). Used paper ink must be non-flammable and should not adversely affect machine rollers. Before you load used paper, verify that the ink on the paper is dry. During the fusing process, wet ink can come off used paper, reducing print quality. Photo • Make sure not to use the inkjet photo paper with this machine. It could cause damage to the machine. Glossy photo 8.
For Letter-sized paper Pull out the output support to the location indicated LTR as shown, and unfold the extension. For A4- or Legal-sized paper Pull out the output support to the location indicated A4, LGL as shown, and unfold the extension.
printing 1. This chapter explains common printing tasks.
Basic printing Canceling a print job Your machine allows you to print from various Windows, Macintosh, Linux or UNIX applications. The exact steps for printing a document may vary depending on the application you use. •Your Printing Preferences window that appears in this user’s guide may differ depending on the machine in use. However, the composition of the Printing Preferences window is similar. Check the operating system(s) that are compatible with your machine (See "System requirements" on page 2).
Using help 4. Click Properties or Preferences. Click the question mark from the upper-right corner of the window and click on any option you want to know about. Then a pop up window appears with information about that option's feature which is provided from the driver. If you want to search information via a keyword, click the Samsung tab in the Printing Preferences window, and enter a keyword in the input line of the Help option.
1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 2) 2. Click the Basic tab, select Poster Printing in the Type drop-down list. 3. Select the page layout you want. Specification of the page layout: •Poster 2x2: Document will be enlarged and be divided into 4 pages. •Poster 3x3: Document will be enlarged and be divided into 9 pages. •Poster 4x4: Document will be enlarged and be divided into 16 pages. 4.
1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 2). 2. Click the Paper tab. 3. Select the paper size you want from the Fit to Page. 4. Select the Size, Source and Type in Paper Options. 5. Click OK or Print until you exit the Print window. 5.Click OK or Print until you exit the Print window. Deleting a watermark 1.
5.If the overlay file you want does not appear in the Text drop-down list, select Edit from the list and click Load. Select the overlay file you want to use. If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Load window. After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay List box. 6.If necessary, check Confirm Page Overlay When Printing box.
Adjusting the sharpness and smoothness • Screen options This option affect the resolution and clarity of your color output. The three screen options are Normal, Enhanced and Detailed. 1.To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 2). 2.Click the Graphics tab then select Advanced in Color Mode. 3.Select the Matching tab. •Printer default: Follows the set value of Screen mode from the printer.
Using the shortcut icon printer drivers connected with selected printer. 1. Select the PDF file you wish to print, drag and drop it to the Direct Printing Utility shortcut icon on your desk top. The selected PDF file is sent to the default machine. If the default machine does not support Direct Printing Utility, the message window alerting you to select the appropriate machine opens. Select the appropriate machine in the Select Printer section.
or the application you are using. The following pane is the first pane you will see when you open the printer properties pane. Select other advanced features from the drop down list. •If you want to encrypt job accounting password, check Job Accounting Password Encryption. •Administrators can enable job accounting and configure permissions in SyncThru™ Web Admin Service. 8. Click OK until you exit the Printer properties window. Macintosh printing This section explains how to print using Macintosh.
1. Open an application, and select Print from the File menu. 2. Select Layout from the drop-down list under Orientation. In the Pages per Sheet drop-down list, select the number of pages you want to print on one sheet of paper. •Administrators can enable job accounting and configure permissions in SyncThru™Web Admin Service. Job Setting (CLX-6250 Series only) This option allows you to choose how to print the printing file by using the 512 MB optional memory or Hard disk.
Printing files system , printer models or the application you are using. You can print many different types of files on your machine using the standard CUPS way, directly from the command line interface. The CUPS lpr utility allows you to do that. But the drivers package replaces the standard lpr tool by a much more user-friendly LPR GUI program. To print any document file: 1. Type lpr from the Linux shell command line and press Enter. The LPR GUI window appears.
UNIX printing General tab •Paper Size: Set the paper size as A4, Letter or other paper sizes, according to your requirements. •Paper Type: Choose the type of the paper. Options available in the list box are Printer Default, Plain, and Thick. •Paper Source: Select the source of the page. By default, it is Auto Selection. •Orientation: Select the direction in which information is printed on a page. •Duplex: Print on both sides of paper to save paper. •Multiple pages: Print several pages on one side of paper.
copying 1. This chapter gives you step-by-step instructions for copying documents. This chapter includes: • • • • • • Basic copy Changing the settings for each copy Changing the default copy settings Basic copy 1. Press This is the normal and usual procedure for copying your originals. 1. Press Using special copy features Copying both sides of the originals Setting copy timeout (Copy) on the control panel. 2. Place originals, face up, in the document feeder.
Reducing or enlarging copies ID card copying You can reduce or enlarge the size of a copied image from 25% to 400% when you copy original documents from the scanner glass, or from 25% to 100% from the document feeder. Your machine can print 2-sided originals on one sheet of A4-, Letter-, Legal-, Folio-, Executive-, B5, A5, or A6-sized paper. The machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original.
•On: Prints output in sets to match the sequence of originals. 4. 5. 6. 7. 8. Your original is divided into 9 portions. Each portion is scanned and printed one by one in the following order: •Off: Prints output sorted into stacks of individual pages. 9. Press Stop/Clear to return to ready mode. 10. Press Start to begin copying. One complete document will print followed by the second complete document.
7. Press the up/down arrow until the binding option you want is highlighted. •Off: Does not use this feature. •Left Page: Use this option to print left page of the book. •Right Page: Use this option to print right page of the book. •Both Page: Use this option to print both pages of the book. 8. Press OK. 9. Press Stop/Clear to return to ready mode. 10. Press Start to begin copying. 7. Press OK. 8. Press Stop/Clear to return to ready mode. 9. Press Start to begin copying.
1. Press printout is rotated 180°. (Copy) on the control panel. 2. Place originals, face up, in the document feeder. Or you can use the scanner glass with a single original document face down and closed the scanner lid. 3. Press Menu on the control panel. 4. Press the up/down arrow to highlight Copy Feature and press OK. 5. Press the up/down arrow to highlight WaterMark and press OK. 6. Press the up/down arrow until the binding Message option you want is highlighted and OK. 7.
scanning 1. Scanning with your machine lets you turn pictures and text into digital files that can be stored on your computer.
Sending a scanned image to several destinations as an email attachment 1. Load originals face up into the document feeder, or place a single original face down on the scanner glass (See "Loading originals" on page 1). 2. Press Storing on your local machine This method means that you store email addresses on your machine’s memory. You can add addresses, as well as group them in particular categories. Individual 1.Turn your networked computer on and open the web browser. 2.
3.Press the up/down arrow until the option you want highlights and press OK. 4.Press the up/down arrow to highlight All and press OK. 5.Press the up/down arrow until the name and address you want is highlighted. You can search upwards or downwards through the entire memory in index (numerical) order. •Scan Format appears only when you selected the Scan destination to My Documents. •If you want to scan from the default setting, press Start. 8. Scanning begins.
Samsung Scan and Fax Manager > Quick Scan. Scanning originals and sending via SMB/FTP (Scan to server) You can scan an image and send it to a total of five destinations via the SMB or FTP. Setting up an FTP server To use an FTP server, you need to set up parameters to access the FTP servers using SyncThru™ Web Service. 1. Turn your networked computer on and open the web browser. 2. Enter your machine's IP address as the URL in a your web browser. 3. Click Go to access the SyncThru™ Web Service. 4.
Using Samsung Scan and Fax Manager If you have installed the printer driver, the Samsung Scan and Fax Manager program is installed too. Start Samsung Scan and Fax Manager program to find out about this program information and the installed scan driver's condition. Through this program, you can change scan settings and add or delete the folders where scanned documents are saved in your computer. The Samsung Scan and Fax Manager program can only be used in the Window and Macintosh system.
into a single image, processing of scanned books and watermark stamping. 1. Press Click the Help button from the lower-left corner of the window and click on any option you want to know about. Then a pop up window appears with information about that option's feature which is provided from the Scan Assistant. Changing the scan feature settings Your machine provides you with the following setting options to allow you to customize your scan jobs.
Windows Vista 1. Make sure that the machine is connected to your computer and powered on. 2. Load originals face up into the document feeder, or place a single original face down on the scanner glass (See "Loading originals" on page 1). 3. From the Start menu select Control Panel > Hardware and Sound > Scanners and Cameras. 4. Double click Scan a document or picture. Windows Fax and Scan application appears.
Preview Pane. 5.When done, press OK. Linux scanning You can scan a document using the Unified Driver Configurator window. Scanning 1. Double-click the Unified Driver Configurator on your desktop. button to switch to Scanners Configuration. 2. Click the 3. Select the scanner on the list. If you use only one machine device and it is connected to the computer and turned on, your scanner appears on the list and is automatically selected.
To delete a Job Type setting Tools 1.Select the setting you want to delete from the Job Type drop-down list. 2.Click Delete. The setting is deleted from the list. Using the Image Manager The Image Manager application provides you with menu commands and tools to edit your scanned image. Name Function Save Saves the image. Undo Cancels your last action. Redo Restores the action you canceled. Scroll Allows you to scroll through the image. Crop Crops the selected image area.
faxing 1. This chapter gives you information about using the fax feature in your machine. This chapter includes: • • • • Preparing to fax Using a fax in your computer Sending a fax Receiving a fax •You cannot use this machine as a fax through the internet phone line. For more information ask your internet service provider. •We recommend using traditional analog phone services (PSTN: public switched telephone network) when connecting telephone lines to use the Fax.
1. 2. 3. 4. 5. e)Press the the up/down arrow to highlight PC: appears and press OK. Open the Samsung Scan & Fax Manager. •For Windows, from the Start menu, click All programs > Samsung Printers > Samsung Scan & Fax Manager > Samsung Scan & Fax Manager. Or you can open this program by right clicking the Smart Panel icon in the Windows task bar and selecting the Samsung Scan & Fax Manager. •For Macintosh, from the Smart Panel menu on status bar, click Samsung Scan & Fax Manager.
11. When you have finished entering fax numbers, press the left/right arrow to select No when Another Page? appears. 12. If an original is placed on the scanner glass, select Yes to add another pages. Load another original and press OK. When you have finished, select No when Another Page? appears. The machine begins sending the fax to the numbers you entered in the order in which you entered them. When you want to cancel a fax job, press Stop/Clear at any time while sending.
6.Press Stop/Clear to return to ready mode. Canceling a reserved delay fax job You can cancel the delayed fax job which is saved in memory. 1.Press Menu on the control panel. 2.Press the up/down arrow to highlight Fax Feature and press OK. 3.Press the up/down arrow to highlight Cancel Job and press OK. 4.Press the up/down arrow until the fax job you want appears and press OK. 5.Press OK when Yes highlights. The selected fax is deleted from memory. 6.Press Stop/Clear to return to ready mode.
•If you have set your machine to this mode and your answering machine is switched off, or no answering machine is connected to EXT socket, your machine automatically goes into Fax mode after a predefined number of rings. •If your answering machine has a user-selectable ring counter, set the machine to answer incoming calls within 1 ring. •If you are in Tel mode when the answering machine is connected to your machine, you must switch off the answering machine.
•Off: Prints in Normal mode. •Long Edge: Prints pages to be read like a book. mode Super Fine 2 3 5 Photo Fax 7. Press OK to save your selection. 8. Press Stop/Clear to return to ready mode. Since your machine is a multi-tasking device, it can receive faxes while you are making copies or printing. If you receive a fax while you are copying or printing, your machine stores incoming faxes in its memory. Then, as soon as you finish copying or printing, the machine automatically prints the fax.
1. Press (Fax) on the control panel. 2. 3. 4. 5. 6. 7. 8. Press Menu on the control panel. Press the up/down arrow to highlight Fax Feature and press OK. Press the up/down arrow to highlight Forward and press OK. Press the up/down arrow to highlight Fax and press OK. Press the up/down arrow to highlight Send Forward and press OK. Press the up/down arrow to highlight On and press OK. Enter the number of the fax machine to which faxes are to be sent and press OK. 9.
is in Fax mode. If an entry is already stored in the number you choose, the display shows the message to allow you to change it. 6.Enter the name you want and press OK. For details on how to enter alphanumeric characters, see ""Entering characters using the number keypad" on page 2. 7.Enter the first few letters of the speed dial’s name you want. 8.Press the up/down arrow until the name and number you want highlights and press OK. 9.Press OK when Yes highlights when Another Page? appears.
Searching sequentially through the memory 1.Press (Fax) on the control panel. 2.Press Address Book on the control panel. 3.Press the up/down arrow to highlight Search & Dial and press OK. 4.Press the up/down arrow to highlight Group Dial and press OK. 5.Press the up/down arrow to highlight Search ID and press OK. 6.Enter the first few letters of the name you want. 7.Press the up/down arrow until the group dial’s name and number you want highlights. Deleting a Address Book for entry 1.
using usb memory device 1. This chapter explains how to use a USB memory device with your machine. This chapter includes: • • • • • About USB memory device Scanning to an USB memory device Printing from a USB memory device About USB memory device USB memory devices are available with a variety of memory capacities to give you more room for storing documents, presentations, music and videos, high resolution photographs, or whatever other files you want to store or move.
The scan size options may vary between document feeder or scanner glass. •Original Type: Sets the original document’s type. •Resolution: Sets the image resolution. •Scan Color: Sets the color mode. If you select Mono in this option, you cannot select JPEG in Scan Format. •Scan Format: Sets the file format in which the image is to be saved. When you select TIFF or PDF, you can select to scan multiple pages. If you select JPEG in this option, you cannot select Mono in Scan Color. 6.
If you see + in the front of a folder name, there are one or more files or folders in the selected folder. If you selected a file, the display shows the size of the file for about 2 seconds. Go to the next step. If you selected a folder, press the up/down arrow until the file you want to delete highlights and press OK. 6. To delete file, press the up/down arrow to highlight Yes and press OK. 7. Press Stop/Clear to return to ready mode. Formatting a USB memory device 1.
machine status and advanced feature 1. This chapter explains how to browse the current status of your machine, and the method of setting for the advanced machine setup. Read this chapter carefully in order to use your machine's diverse features. This chapter includes: • • • • • • • • • Fax setup Copy setup Scan setup Printing a report Clearing memory Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine.
Option Description Option Stamp RCV Name This option allows the machine to automatically print the page number, and the date and time of reception at the bottom of each page of a received fax. Rcv Start Code This code allows you to initiate fax reception from an extension phone plugged into the EXT socket on the back of the machine. If you pick up the extension phone and hear fax tones, enter the code. It is preset to *9* at the factory.
4. Press the up/down arrow until the copy setup item you want is highlighted and press OK. 5. Press the up/down arrow until the setup option you want is highlighted and press OK. 6. Press the up/down arrow until the setting you want is highlighted and press OK. 7. Repeat steps 4 through 6, as needed. 8. Press Stop/Clear to return to ready mode. Change default Option Scan Size The scan size options may vary between document feeder or scanner glass.
Option Description Option Description User Auth List This list shows authorized users who are allowed to use the email function. Scan Setup Restores all of the scan options to the factory default. PCL Font List You can print the PCL font list. System Setup PS3 Font List You can print the PS3 font list. Restores all of the system options to the factory default. Accounting Report This is used only when network authentication in enabled with SyncThru™ Web Service.
•Common Box is provided by default. 1. Press Menu on the control panel. 2. Press the up/down arrow to highlight Document Box and press OK. 3. Press the up/down arrow until the setup option you want is highlighted and press OK. Option Doc Box Feature Description • • Doc Box Setup • • Doc Box Report Add From Scan: You can store scanned documents in a box. The stored file will be named automatically as "yearmonthdayhourminutesecond". Task From Box: You can print a document from a box.
Items Option Copy Setup Change Default Scan Size # of Copies Collation Reduce/Enlarge Darkness Original Type Scan Feature USB Feature Scan Size Original Type Resolution Scan Color Scan Format Email Feature Scan Size Original Type Resolution Scan Color FTP Feature Scan Size Original Type Resolution Scan Color SMB Feature Scan Size Original Type Resolution Scan Color Scan Setup Change Default USB Feature Scan Size Original Type Resolution Scan Color Scan Format Email Feature Scan Size Original Type Res
Items d. This menu only appears when an optional wireless network interface has been installed.
management tools 1. This chapter introduces management tools provided to help you make full use of your machine. This chapter includes: • • • • • Introducing useful management tools Using SyncThru™ Web Service Using the Smart Panel program Introducing useful management tools Some tabs may not appear depending on your model. Information tab The programs below help you to use your machine conveniently. • "Using SyncThru™ Web Service" on page 1. • "Using the Smart Panel program" on page 2.
Address Book tab E-mail notification setup You can store contact information such as name, speed no, e-mail address and so on. For grouping individual addresses, Fax Group entry and E-mail Group entry are ready. •Individual: You can create an individual address book. Click the Add button. •Fax Groups: You can create fax group address books. You can add users by clicking the Add button or by dragging the user from Individual group to Fax Groups. •E-mail Groups: You can create e-mail group address books.
Changing the Smart Panel Program Settings Windows Double-click this icon in Windows. Macintosh Click this icon in Mac OS X. Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select Options. Select the settings you want from the Options window. Linux Click this icon in Linux. Smarthru Office Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your machine name > Smart Panel.
Sending a file to FTP 3.Scan Setting window opens. You can upload files to an FTP server while working on SmarThru Office. 1.Double-click the SmarThru Office icon on your desktop. 2.Select the file to send to FTP. 3.Select File > Send to > Send By FTP. 4.Send By FTP window opens. 5.Add your file and click Upload. Email You can send email while working on SmarThru Office. You need an email client program, such as Outlook Express, to send email in SmarThru Office.
Printers configuration Classes tab Printers configuration has the two tabs: Printers and Classes. The Classes tab shows a list of available machine classes. Printers tab View the current system’s printer configuration by clicking on the machine icon button on the left side of the Unified Driver Configurator window. 1 Switches to Printers configuration. 2 Shows all of the installed machine. 3 Shows the status, model name and URI of your machine. 1 Shows all of the machine classes.
• Properties: Allows you to change the scan properties and scan a document. Ports configuration In this window, you can view the list of available ports, check the status of each port and release a port that is stalled in a busy state when its owner has terminated the job for any reason. • • 1 Switches to Ports configuration. 2 Shows all of the available ports. 3 Shows the port type, device connected to the port, and status. Refresh: Renews the available ports list.
maintenance 1. This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes: • • • • • • • • Printing a machine report Monitoring the supplies life Adjusting the color contrast Finding the serial number Using Toner Low Alert Cleaning a machine Storing the toner cartridge Tips for moving & storing your machine Printing a machine report Option You can print the machine's information and job report. 1. Press Menu on the control panel. 2.
1. 2. 3. 4. 5. 6. Press Menu on the control panel. Press the up/down arrow to highlight System Setup and press OK. Press the up/down arrow to highlight Maintenance and press OK. Press the up/down arrow to highlight Serial Number and press OK. Check your machine’s serial number. Press Stop/Clear to return to ready mode. 3. Press the green release handle to release the paper transfer belt. Holding the handle on the paper transfer belt, lift it out of the machine do not touch surface of belt.
5. With a dry, lint-free cloth, wipe away any dust and spilled toner from the toner cartridge area. 8. Holding the handle on the paper transfer belt, align it with the slots on the inside of the front door. While cleaning the inside of the machine, be careful not to damage the transfer roller or any other inside parts. Do not use solvents such as benzene or thinner to clean. Printing quality problems can occur and cause damage to the machine. 9.
Use of non-Samsung and refilled toner cartridge Samsung Electronics does not recommend or approve the use of non-Samsung brand toner cartridges in your printer including generic, store brand, refilled, or remanufactured toner cartridges. Samsung’s printer warranty does not cover damage to the machine caused by the use of a refilled, remanufactured, or non-Samsung brand toner cartridge. Estimated cartridge life 1 Scanner lid 2 Scanner glass 3 Document feeder glass 4 White bar 4.
troubleshooting 1. This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • • • • • • Redistributing toner Clearing original document jams Tips for avoiding paper jams Clearing paper jams Understanding display messages Solving other problems Redistributing toner If you open the front door, be careful not to touch the underneath the control panel (the lower part of the fuser unit).
place completely. 3. Gently remove the original jammed from the document feeder. 4. Close the document feeder cover. Reload the pages you removed, if any, in the document feeder. 5. Close the front door. Ensure that the cover is securely closed. If the front door is not completely closed, the machine will not operate. Clearing original document jams Exit misfeed 1. Remove any remaining pages from the document feeder. 2.
2. Pull out tray 1 . 1 scanner lid 3. Close the scanner lid. Load the removed pages back into the document feeder. 3. Remove the jammed paper by pulling in the direction shown. To avoid tearing the paper, pull it out gently and slowly. Tips for avoiding paper jams By selecting the correct media types, most paper jams can be avoided. When a paper jam occurs, refer to the next guidelines. • Ensure that the adjustable guides are positioned correctly (See "Loading paper in the tray" on page 3).
1. Pull out optional tray 2. 2. Remove the jammed paper by pulling in the direction shown. To avoid tearing the paper, pull it out gently and slowly. 4. Open the inner cover while you are pushing the lever with two hands. 5. Pull the paper out gently. If the paper does not move when you pull or if you do not see the paper in this area, stop and go to the next step. 3. Pull tray 1 half-way out. 4. If you see the jammed paper, remove the paper from the machine by gently pulling it straight out. 5.
2. Press the green release handle to release the paper transfer belt. Holding the handle on the paper transfer belt, lift it out of the machine. 5. Lower the paper transfer belt until it is parallel with the front door and firmly seated. 3. Remove the jammed paper by pulling in the direction shown. To avoid tearing the paper, pull it out gently and slowly. 6. Close the front door to resume printing. If the front door is not completely closed, the machine will not operate.
6. Pull up the paper jam lever in the direction of the arrow to separate the fuser rollers and carefully remove the jammed paper from the unit. 3. Open the scan unit. When the scanner lid is open, the scan unit cannot be opened. Do not force the scan unit open, it can cause damage to the machine. Close the scanner lid before opening the scan unit. 4. Open the fuser cover. 5. Open the inner cover. 7. Press down the paper jam lever to reapply pressure to the rollers. 8. Close the inner cover.
In the duplex unit area shown to remove the misfed paper. Click this link to open an animation about clearing a jam. 1. Open the front door. 10. Close the inner cover of the reverse unit. 11. Lowering down the scan unit gently and slowly until it is completely closed. Make sure that it is securely latched. Be careful not to pinch your fingers! Be careful not to scratch the surface of the paper transfer belt. 2. Press the green release handle to release the paper transfer belt.
job again. If the problem persists, call for service. •When you call for service, provide the service representative with the contents of display message and the serial number. •Some messages may not appear in the display depending on options or models. •[aaa] indicates the error code. When you contact the service center, this error code help to handle the problem. •[ccc] indicates the part of the each toner cartridge. •[xxx] indicates the media type. •[zzz] indicates the paper size.
Message Replace new [ccc] toner Replace with new [ccc] toner cartridge Meaning The indicated toner cartridge has almost reached its estimated cartridge life. The machine might stop printing. Suggested solutions • Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19798.
Message Meaning Suggested solutions Paper Empty in [yyy] Paper is empty in [yyy]. Load paper Jam bottom of duplex There is no paper in the tray. Load paper in the tray (See "Loading paper in the tray" on page 3). Paper has jammed during duplex printing. Jam in exit area Paper has jammed in exit area. Paper has jammed inside the machine. Clear the jam (See "In the duplex unit area" on page 7). Clear the jam (See "In exit area" on page 5). Clear the jam (See "Inside the machine" on page 4).
Message Paper Empty in [yyy] Paper is empty in [yyy] Load paper Paper Mismatch [yyy] Load [zzz][xxx] Continue Cancel Meaning There is no paper in the tray. The paper size specified in the printer properties does not match the paper you are loading. BOOTP problem BOOTP has a problem. Switching to Auto IP DHCP problem DHCP has a problem. Reconfigure BOOTP/static IP DHCP problem DHCP has a problem. Switching to Auto IP BOOTP problem BOOTP has a problem.
Message Meaning Replace TR. Belt Replace with new Transfer belt unit The life of the transfer belt has expired. Tray[yyy] cassette Out Tray[yyy] cassette is pulled out. Insert it properly Tray[yyy] has a problem Communication problem occurred with tray[yyy] Tray[yyy] Not Installed Tray[yyy] is not installed. Install it Tray2 has a problem Communication problem occurred with Tray2 The tray is not properly closed. Tray2 Not installed Tray2 is not installed.
Condition The machine is not receiving power; or the printer cable connection between the computer and the machine is not connected properly. Paper feeding problems Suggested solutions • Plug in the power cord and then press the power switch to turn the machine on. Condition Suggested solutions Paper jams during printing. Clear the paper jam (See "Clearing paper jams" on page 3). Paper sticks together. • • • • Or press (power) on the control panel. Multiple sheets of paper do not feed.
Printing problems Condition The machine does not print. Possible cause Suggested solutions The machine is not receiving power. Check the power cord connections. Check both power switches and the power source. The machine is not selected from the available printers list. Select this printers “Name” from the available printers drop-down list in the application you are printing from Check the machine for the following: • The front door is not closed. Close the front door. • Paper is jammed.
Condition Possible cause Suggested solutions Condition The document size is so big that the hard disk space of the computer is insufficient to access the print job. Make available more hard disk space and print the document again. The machine prints, but the text is wrong, garbled, or incomplete. The machine selects print materials from the wrong paper source. The paper option that was selected in the Printing Preferences may be incorrect.
Condition Possible cause Suggested solutions The print quality of photos is not good. Images are not clear. The resolution of the photo is very low. Reduce the photo size. If you increase the photo size in the software application, the resolution will be reduced. Before printing, the machine emits vapor near the output tray. Using damp paper can cause vapor during printing. This is not a problem. Just keep printing. The machine does not print special- sized paper, such as billing paper.
Condition Toner smear Vertical repetitive defects Background scatter A Misformed characters Suggested Solutions Condition If toner smears on the page: • Clean the inside of the machine (See "Cleaning the inside" on page 2). • Check the paper type and quality (See "Print media specifications" on page 3). • Remove the toner cartridge and then, install a new one (See "Replacing the toner cartridge" on page 2).
Condition Loose toner • • • • Character Voids A Horizontal stripes A aBb C A aBb C A aBb C A aBb C A aBb C Curl An unknown image repetitively appears on a few sheets or loose toner, light print, or contamination occurs. Copying problems Suggested Solutions Clean the inside of the machine (See "Cleaning the inside" on page 2). Check the paper type and quality (See "Print media specifications" on page 3).
Scanning problems Condition The scanner does not work. Suggested solutions • • • • • The unit scans very slowly. • • • Message appears on your computer screen: • Device can’t be set to the H/W mode you want. • Port is being used by another program. • Port is Disabled. • Scanner is busy receiving or printing data. When the current job is completed., try again. • Invalid handle. • Scanning has failed.
condition suggested solutions Problem The machine dials a number, but the connection with the other fax machine fails. The other fax machine may be turned off, out of paper, or cannot answer incoming calls. Speak with the other machine operator and ask them to solve the problem on their side. Faxes do not store in memory. There may not be enough memory space to store the fax.
Refer to Microsoft Windows User’s Guide that came with your computer for further information on Windows error messages. condition Common Linux problems condition The machine does not print. Some color images come out all black. This is a known bug in Ghostscript (until GNU Ghostscript version 7.05) when the base color space of the document is indexed color space and it is converted through CIE color space.
condition The machine does not appear on the scanners list. • • • The machine does not scan. Common Macintosh problems Suggested solutions • • Ensure your machine is attached to your computer, connected properly via the USB port, and is turned on. Ensure the scanner driver for your machine is installed in your system. Open Unified Linux Driver configurator, switch to Scanners configuration, then press Drivers.
supplies and accessories 1. This chapter provides information on purchasing supplies, accessories and maintenance parts available for your machine. This chapter includes: • • • • • • • • • • • • How to purchase Available supplies Available accessories Maintenance parts Replacing the toner cartridge Replacing the paper transfer belt Available accessories may differ from country to country. Contact your sales representatives to obtain the list of available accessories.
Available accessories You can purchase and install accessories to enhance your machine’s performance and capacity. Accessory Memory module Optional tray 2 Hard disk (CLX-6250 Series only) IEEE 802.11 b/g Wireless LAN (CLX-6250 Series only)a function Extend your machine’s memory capacity.
place completely. skin. When you open the front door and work inside the machine, it is highly recommend that you remove the paper transfer belt first. Because the work you do could contaminate the paper transfer belt. 3. Remove the new toner cartridge from its bag. •Don't use sharp objects, such as a knife or scissors, to open the print cartridge package. You could damage the surface of the print cartridge. •To prevent damage, do not expose the print cartridge to light for more than a few minutes.
the paper transfer belt. •Be careful not to scratch the surface of the paper transfer belt. 5. Holding the handle on the new paper transfer belt, align it with the slots on the inside of the front door. • Activating the added accessories in the PS driver properties. After installing an accessory such as an optional tray, PS driver users must do the additional setting. Go to the PS printer properties and set the added accessory activated.
Installing a memory module Printing with the optional memory (CLX-6250 Series only) 1. Turn the machine off and unplug all cables from the machine. 2. Remove the screws and remove the rear cover. •You can only use this feature if you have installed the 512 MB optional memory. (CLX-6250 Series only) •After installing the optional memory, you can use advanced printing features, such as proofing a job and specifying of printing a private job in the printer properties window.
If you enter the incorrect password, Invalid Password appears. Reenter the correct password. 5.Press the left/right arrow until the desired setting appears and press OK. •Cancel: You can delete a file from the queue. •Promote: You can select a job waiting in the active job queue and change its print order so that it can be printed sooner. •Release: You can print a job scheduled to be printed at a specified time immediately.
Wizard mode 1 Connector 2 Wireless interface card 8. Install the control board cover with the screws removed in step 3. 9. Install the rear cover with the screws removed in step 2. 10. Plug all the cables back into the machine, and turn the machine on. 11. Set the wireless network environment. For information about configuring and using the printer on a wireless network environment, refer to the Wireless network install guide provided with the wireless network interface card.
-Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Enter the WEP Key using number keypad after selecting Open System and then press OK. -SharedKey: Authentication is used. A device that has a proper WEP Key can access the network. Enter the WEP Key using number keypad after selecting SharedKey and then press OK. •WPA-PSK or WPA2-PSK: You can select WPA-PSK or WPA2-PSK to authenticate the print server based on WPA Pre-Shared Key.
1.Press Menu on the control panel. 2.Press the up/down arrow to highlight System Setup and press OK. 3.Press the up/down arrow to highlight Job Management and press OK. 4.Press the up/down arrow to highlight Stored Job and press OK. 5.Press the up/down arrow to highlight the user’s name and file name you want use and press OK. If the select file is a confidential print job, enter the specified 4-digit password. Use the up/down arrow to enter digits and use the left/right arrow to move between digits.
same name when you enter a new file name, the file will be saved as a different name that is automatically programmed. •Overwrite : You can set the machine to delete previous job information on hard disk drive (HDD) as you store new job information. 6.Press OK. Deleting residual image data Image Overwrite is a security measure for customers who are concerned about unauthorized access and duplication of classified or private document. 1.Press Menu on the control panel. 2.
specifications 1. This chapter guides you about this machine’s specifications. This chapter includes: • • • • Hardware specifications Environmental specifications Electrical specifications Print media specifications The specification values are listed below, specification are subject to change without notice. See www.samsung.com/printer for possible changes in information. Hardware specifications Item Dimension Description Height 651 mm (25.63 inches) Depth 498 mm (19.61 inches) Width 468 mm (18.
Item Power consumption Average operating mode Ready mode Power save mode Power off mode Description • CLX-6220 Series: • CLX-6250 Series: • CLX-6220 Series: • CLX-6250 Series: • CLX-6220 Series: • CLX-6250 Series: Less than 1 W Less than 550 W Less than 580 W Less than 33 W Less than 38 W Less than 11 W Less than 13 W a. See the rating label on the machine for the correct voltage, frequency (hertz) and type of current for your machine.
Print media specifications Type Plain paper Envelope Thick paper Thin paper Size Print media weighta/Capacityb Dimensions tray1 / optional tray Letter 216 x 279 mm (8.5 x 11 inches) 70 to 90 g/m (19 to 24 lbs bond) Legal 216 x 356 mm (8.5 x 14 inches) • US Folio 216 x 330 mm (8.5 x 13 inches) 250 sheets of 80 g/m2(20 lbs bond) for tray1 A4 210 x 297 mm (8.27 x 11.69 inches) • Oficio 216 x 343 mm (8.5 x 13.5 inches) 500 sheets of 80 g/m2(20 lbs bond) for optional tray.
b. Maximum capacity may differ depending on media weight, thickness, and environmental conditions. c. Smoothness: 100 to 250 (sheffield).
administrator’s guide (windows only) 1. This chapter gives helpful information and troubleshooting tips for system administrators using Samsung Installer. Overview Samsung provides convenient installation methods useful for administrators. Administrators can remotely install the machine driver to multiple client computers or use command window to install the driver at once. Administrators can also make their own installation package for distribution.
16. Select the group(s) and click Next to start remote installation. Remote installation begins, you can see the installation status from the window. 17. When installation is completed, Results of remote installation window appears. Check the result. For failed client computers, you can reinstall again by clicking the Reinstall button. For failed client computers, you can check the log file which is created in the client computers.
Error log messages Message Connection Error Message Meaning Unable to bind the socket. [Port number:..] Suggested solutions Restart the client computer. Unable to listen the socket. [Port number:..] • • Check if C drive folder is shared as C$. Check if you can remotely access the client computer’s C$ folder on a network browser. Unable to copy service files. Check if you can remotely access the client computer’s C$ folder on the network browser. Unable to start the service on the client computer.
4. Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next. 5. Select Package Type window appears. Select Normal(setup.exe) or Self-Extraction Package. If you place the mouse cursor over the package type, you can see the detailed information on the bottom right side of the window. 6. Select Software and Utilities to Install window appears. Check the device drivers or application software you want to included in the setup package and click Next. 7.
3. 4. 5. 6. •If you use Windows Vista, Windows 7 and Windows 2008 Server R2 click Start > All programs > Accessories > Run. Type X:\Setup.exe replacing “X” with the letter which represents your CD-ROM drive and click OK. •If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control windows. •If the AutoPlay window appears in Windows 7 and Windows 2008 Server R2, click Run Setup.
Commandline /i”
