User Manual (ver.1.00)

Understanding display messages
140
4. Troubleshooting
14
Network-related messages
15
Misc. messages
Message Meaning Suggested solutions
• IP Conflict
• This IP address
conflicts with that of
other system
The network IP address
you have set is being
used by someone else.
Check the IP address
and reset it if necessary
(see Advanced Guide).
• 802.1x Network Error
• 802.1x Network Error
Contact the Admin.
Fail to authenticate. Check the network
authentication
protocol. If the problem
persists, contact your
network administrator.
Message Meaning Suggested solutions
• Adjusting Color
Registration...
The machine is adjusting
the color registration.
Wait a few minutes.
• Calibrating image
density…
The machine is
calibrating the image
density.
Wait a few minutes.
• Door is open.
Close it
The front cover or rear
cover is not securely
latched.
Close the cover until it
locks into place.
• Scanner door open
• Door of scanner is
open.
Close the door
The document feeder
cover is not securely
latched.
Close the cover until it
locks into place.
• Error: [error number]
Actuator [unit type]
Failure: [error number]
Call for service
• Error: [error number]
[unit type] Failure: [error
number] Turn off then
on. Call for service if the
problem persists.
• Error: [error number]
[unit type] Unit Failure:
[error number] Please
turn off then on
The machine unit cannot
be controlled.
Reboot the power and
try the printing job
again. If the problem
persists, please call for
service.
• Not Proper room temp
• Not Proper room
temperature.
Change room
temperature
The machine is in a room
with improper room
temperature.
Move the machine to a
room with proper
room temperature (see
"Specifications" on
page 144).
Message Meaning Suggested solutions