Owner manual

Menu overview and advanced features_ 15
Density (administrator only; SCX-8230 8240 Series
only)
Allows you to adjust the tone and density so the printouts are sharper
and clearer.
Auto Tone Adjustment
Allows you to automatically adjust tone for the best possible print quality.
1. Press Mach
ine Setup > General Settings > Density > Auto Tone
Adjustment from the display screen.
2. Select the appropriate option and press Execute Now.
• Mono: Automatically adjusts the mono tone.
3. The machine starts tone
adjustment.
Density Adjustment
Allows you to adjust density for print and copy job.
1. Press Mach
ine Setup > General Settings > Density > Density
Adjustment from the display screen.
2. Use the “+” and “-” button to adjust the density.
• Print Density: Adjust the print density.
• Copy Density: Adj
ust the copy density.
3. Press OK to
save the change or Back (Cancel) to return to the
previous screen.
Sound
You can set the volume for button sound, notice alarm, and the sounds
occurring during a fax job. Using the Quiet/Loud buttons select the
desired volume and press the Test button to test the volume.
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type
the IP address of your machine. When SyncThru™ Web Service
opens, click Settings tab > Machine Settings > Sound/Volume
(see "Sound/Volume" on page 77).
1. Press Ma
chine Setup > General Settings > Sound from the
display screen.
2. Select the appropriate option.
• Button & Notice Sound: You can set the sound volume for
when pressing the button and notice alarm.
• Fax Sound: You can set the sound occurring during a fax job.
This option has other sub-options.
3. If yo
u have selected Button & Notice Sound, skip to
step 4.
If you have selected Fax So
und, select the sub option.
4. Select the
volume using the Quiet/Loud button.
If you want to mute the sound, press the Mute button.
If yo
u want to check the volume before applying it, press the Test
button.
For speaker volume, you can check Sounds Only in
Communication to turn the speaker on when transmitting a
fax.
5. Press OK to save the chan
ges or Back (Cancel) to return to the
previous screen.
Date and Time (administrator only)
When you set the time and date, it will be used for sending/printing
delayed fax/print jobs or will be printed on reports. However, if they are
not correct, you need to change it to the correct time.
• You can also use this feature from the SyncThru™ Web
Service. Open the Web browser from your networked
computer and type the IP address of your machine. When
SyncThru™ Web Service opens, click Settings > Machine
Settings > System (see "System" on page 76).
• If the machine’s power is cut off, you need to reset the correct
time and date once the power has been restored.