Owner manual

Menu overview and advanced features_ 16

1. Press Machine Setup > General Settings > Date and Time from

the display screen.

2. Select the appropriate option.

• Date & Time: Select the date, time and time offset using the

up/down and left/right arrows.

Example for selecting the time offset: If your local time is 4

hours faster than UTC, press the right arrow until +4 shows.

• Date Format: Select the date format you want.

• Time Format: Sele

ct the time format you want.

3. Press OK to

save the change or Back (Cancel) to return to the

previous screen.

Altitude Adjustment

You can choose the altitude of the place where your machine is located.

The print quality is affected by atmospheric pressure, which is

determined by the height of the machine above sea level. Therefore, it is

important to set the right altitude.

You can also use this feature from the SyncThru™ Web Service.

Open the Web browser from your networked computer and type

the IP address of your machine. When SyncThru™ Web Service

opens, click Settings tab > Machine Settings > System (see

"System" on page 76).

1. Press Mach

ine Setup > General Settings > Altitude Adjustment

from the display screen.

4,000 m

(13,123 ft)

3,000 m

(9,842 ft)

2,000 m

(6,561 ft)

1,000 m

(3,280 ft)

1 High 3

2. Press the altitude your machine is in. Refer to the picture below.

3. Press OK to save the changes or Back (Cancel) to return to the

previous screen.

2 High 2

3 High 1

4 Normal