Owner manual

Menu overview and advanced features_ 17
Power Saver
You can also use this feature from the SyncThru™ Web Service.
Open the Web browser from your networked computer and type
the IP address of your machine. When SyncThru™ Web Service
opens, click Settings tab > Machine Settings > System (see
"System" on page 76).
Using the low power save option
Low Power Save option allows your machine to save power. When you
are not using the machine for a while, some parts of the machine
automatically enter Low Power Save option. Low Power Save option
conserves less power than Power Save option.
1. Press Machine Setup > General Settings > Power Saver > Low
Power Save from the display screen.
2. Select the appropriate time using the up/down arrows.
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
The Low Power Save option can be canceled by pressing any
button on the control panel or by pressing the display screen.
Using the power save option
When you are not using the machine for a while, use this option to save
power. The machine conserves more power in Power Save option than
in Low Power Save mode.
1. Press Machin
e Setup > General Settings > Power Saver > Power
Save from the display screen.
2. Select the appropriate time using the up/down arrows.
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
The Power Save option can be canceled by pressing any button
on the control panel or by pressing the display screen.
Contention Management (administrator only)
When copy and print jobs are sent to the machine at the same time, you
can set the job processing order.
1. Press Ma
chine Setup > General Settings > Contention
Management from the display screen.
2. Select the appropriate option.
Priority: Set the priority by numbering the job between 1-16
using the up/down arrows. Higher number has a priority.
First In, First Out: The machine proceeds with the jobs in the
requested order.
3. Pr
ess OK to save the chan
ge or Back (Cancel) to return to the
previous screen.
Machine Test (administrator only)
Press Machine Setup > General Settings > Machine Test from the
display screen.
Print Adjustment
Allows you to adjust the print area. When images are printed off the
page or shifted, adjust the print area.
1. Press Machine Setup > General Settings > Machine Test >
Adjustment > Print Adjustment from the display screen.
2. Press Paper Supply and select the tray to supply the paper from.
3. Press Paper Size and select the paper size to use.
4. Press Print. The adjustment pattern (chart) is printed.
5. Press Next and follow the instruction on the screen.
The Next button is enabled after you press Print.
Scan Area Adjustment
Automatically adjusts scan area. When the machine does not detect the
scan area properly, adjust the scan area.