Owner manual

Menu overview and advanced features_ 32
Eco mode.
- Copy Settings: You can set copy related settings. The
settings you set here will be applied to all the copy jobs sent
to the machine, unless the user disables Eco mode.
- Document Box Print Settings
: You can set printing from
document box related settings. The settings you set here will
be applied to all the document box print jobs sent to the
machine, unless the user disables Eco mode.
For detailed explanations of each setting options, refer to
the User’s Guide on the supplied User’s Guide CD.
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
Initial settings (administrator only)
You can change the initial settings you se when you first turn the
machine on.
If you want to stop adjusting the initial settings, press Exit. The
settings you have set so far will be saved. However, the Exit
button is not enabled if it’s the first time using this option.
1. Press Mach
ine Setup > Initial Settings from the display screen.
2. Press the language to use on the display screen and then press
Next.
3. Read the note and then press Next.
If you want to reset the language, press Back and select the
language you want.
4. Press the Device Name field.
The pop up keyboard appears.
Remove the existing device name and enter the device name you
want to use and then press OK. Then press Next.
Keep in mind to enter the device name to be used on the network.
• If necessary, enter the location of the machine in the
Location field.
• If necessary, enter the information in the Administrator
field for the person to contact when any problem occurs on
the machine.