Owner manual

0
4,000 m
(13,123 ft)
3,000 m
(9,842 ft)
2,000 m
(6,561 ft)
1,000 m
(3,280 ft)
4
3
2
1
1 High 3
Menu overview and advanced features_ 34
b) If you press IP, go to step c. If you press Host, step e.
c) Press the IP field. The pop-up keyboard appears. Enter a IP
address which provides the time information, and then press OK.
d) Press the Port No field. The pop-up keyboard appears. Enter a
port number and then press OK. Go to step f.
e) Press the Host field. The pop-up keyboard appears. Enter a host
name manually. You can also press Host List, and then select a
host name in Time Server List and press Close.
f) Press the Port No field. The pop-up keyboard appears. Enter a
port number and then press OK.
g) Press Result for checking the SNTP setting and then press
Close. If necessary, try to set it again.
h) Press Next.
9. Select a unit, numeric separation, and standard paper size to be
used on the display screen and then press Next.
10. Select an altitude level where the machine is installed. The print
quality is affected by atmospheric pressure, which is determined by
the height of the machine above sea level. Then press Next.
11. Enter the Community Name and select the Access Permission
then press Finish.
You do not need to enter the community name.
12. The Completed window appears. Press the Close button. The
machine restarts.
If the engine is busy, the machine might take longer to reboot.
Customer support
This feature allows you to view the service center's information and
contact point where users can get help. If you log in as an administrator,
you can change the contact information.
1. Pr
ess Ma
chine Setup > Customer Support from the display
screen.
2. Select the appropriate option.
• Service Center: Check the information of the service center.
• Contact Info: C
heck the contact information of the
administrator.
3. If yo
u want to change the in
formation, press Settings and login as
an administrator.
4. Change the information.
5. Press OK to save the change or Back (Cancel) to return to the
previous screen.
Application Management (administrator only)
You can install or uninstall applications/license. If you add an
application, you need to activate the license of the installed application.
Some applications may not have a license.
• You can also use this feature from the SyncThru™ Web
Service. Open the Web browser from your networked
computer and type the IP address of your machine. When
SyncThru™ Web Service opens, click the Maintenance tab >
2 High 2
3 High 1
4 Normal