Owner manual

Menu overview and advanced features_ 38
HTTPS Settings
1. Press Machine Setup > Security > HTTPS Settings from the
display screen.
2. Select Enable to enable HTTPS.
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
To apply the change, you need to reboot the machine.
IPSec Settings
1. Press Machine Setup > Security > IPSec Settings from the display
screen.
2. Set the settings.
• Current Status: Shows the current status of IP security
functionality.
• IPSec: Select to enable IP security.
• Sh
ared Secret: Enter a new Pre-Shared Key for IP security
communication.
To activate this setting, IPSec and Change Shared Secret
should be selected.
• Confirm Shared Secret: Confirm the Pre-Shared Key for IP
security communication.
• Change Shared Secret: Select to change the Shared Secret.
You need to check this option to enter Shared Secret and
Confirm Shared Secret.
• Clear
Connection : Clear all previous IP security connections
with the client.
3. Press OK to save the change or Back (Cancel) to return to the
previous screen.
To apply the change, you need to reboot the machine.
Image Overwrite
You can set the machine to overwrite data stored in the memory. The
machine overwrites the data with different patterns eliminating the
possibilities of recovery.
This feature may not be available depending on models or option
kits installed.
Automatic Image Overwrite
When a job is completed, there are temporal images left in the memory.
For security reasons, you can set the machine to automatically overwrite
secure non-volatile memory. If you want to secure memory space, you
can set the machine to automatically overwrite secure non-volatile
memory.
1. Press Ma
chine Setup > Security > Image Overwrite > Automatic
Image Overwrite from the display screen.
2. Select the appropriate option.
• Enable: Select to enable automatic image overwrite.
• Disable: Se
lect to disable automatic image overwrite.
3. Press OK to save the chan
ge or Back (Cancel) to return to the
previous screen.