Owner manual

Software installation_ 48
Server R2, click Run Setup.exe in Install or run program field,
and click Yes in the User Account Control windows.
3. Select Administrator Installation > Create Customized Installer.
If necessary, select a language from the drop-down list.
4. Rea
d License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
5. Select Package Type window appears.
Select No
rmal(setup.exe) or Self-Extraction Package.
If you place the mouse cursor over the
package type, you can see
the detailed information on the bottom right side of the window.
6. Select Software and Utilities to In
stall window appears.
Check the device drivers or application software you want to
incl
uded in the setup package and click Next.
7. Select Printer connection window appears.
Select the printer connection type and click Nex
t.
• If you selected Network Connection, Search Network Printers
window appears, type in the IP address or host name in the
information field than click Search. when you are finished, click
Next.
• The discovered printer list will show network printers on the same
subnet. If you want to specify a network printer that is located
over subnet then specify IP address of network printer directly.
If you can’t search network printers on the network then check
whether your firewall setting is disabled. If it is enabled, disable
firewall temporarily and try searching again.
8. Set Printer Drivers win
dow appears. Click Next.
If necessary, configure printer name, sharing, shared name and
defau
lt printer setting. If you changed settings then you should click
Apply button to apply changes then click Next.
9. Summary
window appears. Check the package information and
click Next to start creating the setup package.
You can modify the package configuration by clicking the Ba
ck
button.
Check the Install the package as silent mode, if you want to
make the installation package as a silent installation package.
Silent installation installs the driver automatically by the set
option without user intervention.
10. Whe
n creating the setup package is finished, Packaging
Completed window appears.
Check Open package folder upon completion if you want the
created package to open automatically after it’s created.
11. Cli
ck Finish.
Creating a setup script file
You can generate setup configuration script file based on the CD image.
It can be used with Silent installation for distributing software to multiple
client computers. For example, you can upload a full CD setup files into
a file server then distribute batch file or log-on script file that executes
silent installation with this customized script file (ex:
\\<file_server>\CD\setup.exe /s /i”c:\temp\CONFIG.CI3).
1. Make sure that the machine is connected to the network and
powered on.
2. Insert
the supplied software CD into your CD-ROM drive.
• The software CD should automatically run and an installation
window appears.
• If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing “X” with the letter which
represents your drive. Click OK.
• If you use Windows Vista, Windows 7, or Windows 2008 Server
R2 click Start > All programs > Accessories > Run.
Type X:\Setup.exe repl
acing “X” with the letter which represents
your drive and click OK.
• If
the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in
the User Account Control windows.
• If the AutoPlay window appears in Windows 7 or Windows 2008
Server R2, click Run Setup.exe in Install or run program field,
and click Yes in the User Account Control windows.
3. Select Administrator Installation > Create Customized Installer.
If necessary, select a language from the drop-down list.
4. Read
License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
5. Select Package Type window appears.
Select Genera
te Script.
If you place the mouse cursor over the package type, you can see
th
e detailed information on the bottom right side of the window.
6. Select Software and Utilities to Install wi
ndow appears.
Check the device drivers or application software you want to
inclu
ded in the setup package and click Next.
7. Select Printer connection wind
ow appears.
Select the printer connection type and click Nex
t.
• If you selected Network Connection, Search Network Printers
window appears, type in the IP address or host name in the
information field than click Search. when you are finished, click
Next.
• The discovered printer list will show network printers on the same
subnet. If you want to specify a network printer that is located
over subnet then specify IP address of network printer directly.
• If you can’t search network printers on the network then
check whether your firewall setting is disabled. If it is
enabled, disable firewall temporarily and try searching
again.
• Setup configuration script filename is set as CONFIG.CI3
and it’s not changeable.
8. Set Printer Drivers window appears. Click Next.
If necessary, configure printer name, sharing, shared name and
defaul
t printer setting. If you changed settings then you should click
Apply button to apply changes then click Next.
9. Summary win
dow appears. Check the package information and
click Next to start creating the setup package.
You can modify the package configuration by clicking the Bac
k
button.
Check the Install the package as silent mode, if you want to
make the installation package as a silent installation package.
Silent installation installs the driver automatically by the set
option without user intervention.
10. When creating the setup package is finished, Packaging
Completed window appears.
Check Op
en package folder upon completion if you want the
created package to open automatically after it’s created.
11. Click Fi
nish.