Owner manual

Software installation_ 50
Language code
/a”<dest
_path>”
or
/A”<dest
_path>”
Specifies
destination path for
installation.
The
destination
path should be
a fully
qualified path.
Since printer drivers should be
installed on the OS specific location,
this command applies to only
application software.
/i”<script
filename
>” or
/I”<script
filename
>”
Specifies
customized install
script file for custom
operation.
The script
filename
should be a
fully qualified
filename.
Customized script file can be assigned
for customized silent installation. This
script file can be created or modified
through provided installer customizing
utility or by text editor.
Note: This customized script file is prior
to default installer setting in setup
package but not prior to command-line
parameters.
/n”<Print
er
name>”
or
/N”<Prin
ter
name>”
Specifies printer
name. Printer
instance shall be
created as specified
printer name.
With this parameter, you can add
printer instances as needed.
/nd or
/ND
Commands not to
set the installed
driver as a default
printer driver.
It indicates installed printer driver will
not be the default printer driver on your
system if there are one or more printer
drivers installed. If there is no installed
printer driver on your system, then this
option won’t be applied because
Windows OS will set the installed
printer driver as a default printer driver.
/x or
/X
Uses existing printer
driver files to create
printer instance if it
is already installed.
This command provides a way to
install a printer instance that uses
installed printer driver files without
installing an additional driver.
/up”<pri
nter
name>”
or
/UP”<pri
nter
name>”
Removes only
specified printer
instance and not the
driver files.
This command provides a way to
remove only specified printer instance
from your system without effecting
other printer drivers. It will not remove
printer driver files from your system.
/d or
/D
Uninstalls all device
drivers and
applications from
your system.
This command will remove all installed
device drivers and application software
from your system.
/v”<shar
e
name>”
or
/V”<shar
e
name>”
Shares installed
machine and add
other available
platform drivers for
Point & Print.
It will install all supported Windows OS
platform’s printer drivers to system and
share the machine with the specified
<share name> for Point & Print.
Comm
and-
line
Definition Description
/o or
/O
Opens Printers and
Faxes folder after
installation.
This command will open Printers and
Faxes folder after the silent
installation.
/f”<log
filename
>” or
/F”<log
filename
>”
Specifies log
filename.
The default log file
is created in the
system temp folder
if not specified.
It will create a log file to a specified
folder.
/h, /H or
/?
Shows
Command-line
Usage.
Code Language
0X0009 English
0X0012 Korean
0X0804 Simplified Chinese
0X0404 Traditional Chinese
0x040c French
0X0007 German
0X0010 Italian
0X000a Spanish
0X0013 Dutch
0X001D Swedish
0X0006 Danish
0X000b Finnish
0X0014 Norwegian
0X0019 Russian
0X0005 Czech
0X000e Hungarian
0X0008 Greek
0X0816 Standard Portuguese
0X0416 Brazilian Portuguese
0X0015 Polish
0X001F Turkish
0X0001 Arabic
0X000D Hebrew
0x0424 Slovenian
0X0418 Romanian
0X0402 Bulgarian
Comm
and-
line
Definition Description