User manual

How to Operate Double Quantity Pad

1 Press the Double Quantity pad.

2 Press the desired memory number pad.

Result: Cooking time which was multiplied by the preset factor appears

in the display and cooking starts with time digits counting down.

➢ You don’t need to press button to start heating.

You can select the beep tone you require. There are 4 sound levels

available.

1 Hold down and then press NUMBER 0 pad. Hold together for 2

seconds.

Result:

Beep tone is changed to one level higher than current one.

➢ Beep tone 0 does not make beep sound.

Settings are circulating whenever you press the hidden keys in the following order.

Snd 0 → Snd 1 → Snd 2 → Snd 3 → Snd 0 (No sound)

➢ Default tone is Snd 2.

Controlling Beep Tone

+ 30sec

Error Codes

Error Items Code Error Beep Cause/Remedy

Cause: Power frequency is other than 50 Hz.

Remedy

: • Unplug the power cord plug and check if the

power frequency is 50 Hz.

• Plug the power cord in 50 Hz power source and

see If “E1” appears. If the error code is displayed

again even after the correct power source is

provided, contact the nearest service centre.

Power frequency Error(50/60Hz) E1

One long beep

for 2 sec

Cause:

Memory IC (EEPROM IC) is not working correctly.

In this case, other features except for memory

function work properly. (You can operate the oven

manually)

Remedy: Press CANCEL pad one or more times and try

to start a memory heating. If the error code “E5”

persists, contact your nearest service centre.

EEPROM Error

One long beep

for 2 sec

CM1029-EU-2 2/11/00 4:59 AM Page 17