Service manual

Samsung Electronics

3-5 Operation Guide (CM1029 continued)

How to Operate Memory Cooking

After having finished memory programming, just press the NUMBER pad of the memory number you want to

select. The oven will automatically start heating according to the pre-programmed cooking time and power

level after a short delay (5 sec).

1. Make sure the oven is plugged into a properly earthed electrical outlet and ÔONÕ appears in the display

window.

2. Open the door.

The oven lamp will be turned on.

3. Put the food into a suitable container, place it in the centre of the oven and then close the door securely.

Result: The oven lamp will go off.

4. Press NUMBER pad.

Result: After 2 seconds, the selected memory program automatically starts heating.

Stopping the Cooking

You can stop cooking at any time so that you can:

¥ Check the food

¥ Turn the food over or stir it

¥ Leave it to stand

To stop the cooking;

* Temporarily: Open the door or press pad once.

Result: Cooking stops. To resume cooking, close the door and press again.

* Completely: Press the pad twice.

Result: The cooking settings are cancelled.

If you want to cancel any cooking settings before starting cooking, simply press CANCEL pad once.

Operating Instructions