User manual

21
ENGLISH
DOUBLE QUANTITY PAD PROGRAMMING
Double Quantity Factor Editing
Error
Items
Code
Error
Beep
Cause Remedy
Power
frequency
Error
(50/60Hz)
E1 -
Power
frequency is
other than 50
Hz.
Unplug the power cord
plug and check if the
power frequency is 50
Hz.Plug the power cord in
50 Hz power source and
see If “E1” appears. If the
error code is displayed
again even after the
correct power source
is provided, contact the
nearest service centre.
EEPROM
Error
E5
One long
beep for
2 sec
Memory IC
(EEPROM IC)
is not working
correctly.In this
case, other
features except
for memory
function work
properly. (You
can operate the
oven manually)
Press CANCEL pad one
or more times and try to
start a memory heating.
If the error code “E5”
persists, contact your
nearest service centre.
HIDDEN KEYS
Note: Press Key 1 and then the next one. Hold for 2 secs.
Feature
Key Entry
Display Remark
Key 1 Next
Continuity time
total
CANCEL
( )
1
Hold together for 2
sec.Unit: 10 hrs.
Magnetron
oscillating time
total
CANCEL
( )
2
Hold together for 2
sec.Unit: 1 hr.
Number of
times of use
by memory
program code
CANCEL
( )
Start
Hold together for 2
sec.
Heating time
per memory
program code
(Automatic
sequential
display)
Code No.
(Data display
after 2 sec.)
739 times of use
(New code can
be set after data
display)
CANCEL ( )
(Mode Cancel)
Heating time
per memory
program code
(Automatic
sequential
display)
CANCEL
( )
P
Hold together for 2
sec.
(Sequentially
displays for 3
sec from 1 to
20)
CANCEL ( )
(Mode Cancel)
CM1029_XEU_DE68-2570B-01_EN.indd 21 11/18/2013 7:27:46 PM