㫖 㫖 SyncMaster 741MP 㫖 㩷 㫖 㫖 㫖 㫖 㫖 㫖㩷 㫖 Install Driver 㫖 㫖㩷 㫖 G G Install Program 㫖 㫖 G G 㫖 GG SyncMaster 741MP SyncMaster 941MP
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. Do not use a damaged or loose plug.
z This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause electric shock or fire. Use only a properly grounded plug and receptacle. z An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. z A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. z Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. z Failure to do so may cause electric shock or fire inside the monitor. Do not drop the monitor when moving it. z This may cause damage to the product or the person carrying it.
z Failing to do so may damage the monitor. Do not place the monitor face down. z This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. z z Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10cm/4 inches) for ventilation purposes.
z This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. z A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. z Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth.
Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. z z This may cause malfunction, an electric shock or fire. In particular, avoid operating the monitor near water or outdoors where it could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center . z The monitor may cause a malfunction, electric shock or fire.
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports or etc. z It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. If you view a fixed screen for an extended period of time, residual image or blurriness may appear.
When not using the product for an extended period of time, keep the product unplugged. z Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. z Children may try to climb on the product to retrieve an object. The product could fall, causing causing injury or even fatality.
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.
D-Sub Cable Power Cord Remote Control Batteries (AAA X 2) Audio Cable Other Front 1. SOURCE 2. MENU 3. 4. 5. Power indicator 6. [ ] Power button 7. Remote Control Sensor 8. Speaker 1. SOURCE Switches from PC mode to Video mode. Changing the source is only allowed for external devices that are connected to the monitor at the time. To switch Screen modes: [PC] [TV] [Ext.
2. MENU Use this button to open the on-screen menu and step back in the menu. 3. 4. Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume. >>Click here to see an animation clip Moves from one menu item to another vertically or adjusts selected menu values. In TV mode, selects TV channels. When pressing the button even when using PC, AV, or S-Video mode, the mode changes to TV mode and the channel will be changed.
2. PC IN Computer Connection Terminal (15 Pin D-SUB) 3. AUDIO Audio Connection Terminal 4. EXT(RGB) EXT(RGB) Connection Terminal - EXT(RGB) is mainly used in Europe. As for EXT(RGB) port of the monitor, it makes TV or Video signal input and output. 5.
6. AV Connection Terminal 1. Headphone Connection Terminal (Output) 2. S-Video Connection Terminal (Input) 3. Video Connection Terminal (Input) 4. Right(R) / Left(L) audio Connection Terminal (Input) 7. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately. ) For using a locking device, contact where you purchase it. See Connecting the Monitor for further information regarding cable connections.
7. (MagicBright™) 8. ENTER 9. TTX/MIX 10. AUTO / PRE-CH 11. P 12. SOURCE 13. INFO 14. EXIT 15. Up-Down Left-Right Buttons 16. DUAL l - ll 17. SLEEP 18. P.MODE 1. POWER Use this button to turn the monitor On/Off. 2. number buttons Selects TV channels in the TV mode. 3. -/-- (One/Two-Digit CHANNEL selection ) Use to select a CHANNEL numbered ten or over. Press this button, and the "--" symbol is displayed. Enter the two-digit CHANNEL number. 4. MUTE Press to mute the sound temporarily.
13. INFO Current picture information is displayed on the upper left corner of the screen. 14. EXIT Exits from the menu screen. 15. Up-Down Left-Right Buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 16. DUAL l - ll STEREO / MONO can be operated depending on broadcasting type by using DUAL button on the remote control while watching TV. 17. SLEEP Turns the monitor off after a pre-determined period of time. 18. P.
Connecting the Monitor 1. Connecting to a Computer 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the audio cable for your monitor to the audio port on the back of your computer. 4. Turn on both your computer and the monitor. 2.
1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the D-SUB port on the Macintosh computer. 2. For old model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh adapter (optional) referring to the switch configuration table shown on its rear. 3. Turn on the monitor and Macintosh. Connecting to Other Devices The configuration at the back of the monitor may vary from product to product. 1-1.
3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. 4. Select AV or S-Video using the SOURCE button. 1-2. Connecting EXT(RGB) - It only applies to AV DEVICE that supports SCART. Connect to the DVD Devices input if the device has a EXT(RGB). You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on. 1. Connect the SCART cable to the DVD SCART connector. 2. Select Ext. by using the SOURCE button. 2.
3. Connecting Headphone You may connect your headphones to the monitor. 1. Connect your headphones to the Headphone connection terminal. Using the Stand This monitor supports various types of VESA-standard bases. You need to either fold or remove the base in use to install a VESA base. 1. Folding the Base The monitor may be reclined 0 to 23 degrees. 2. Attaching the Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
A. Monitor B. Mounting interface pad (sold separately) 1. 2. 3. 4. Turn off your monitor and unplug its power cord. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. Fold the stand 90 degrees perfectly. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.
This monitor driver is under certified MS logo and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com. 5. Monitor driver installation is completed. Windows XP | Windows 2000 |Windows Me |Windows NT | Linux Installing the Monitor Driver (Manual) When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor.
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
This monitor driver is under certified MS logo and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com 9. Click the "Close" button then click "OK" button continually. 10. Monitor driver installation is completed. Microsoft® Windows® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose the "OK" button on the "Insert disk" window. 2.
Microsoft® Windows® Millennium Operating System 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Click "Start," "Setting," and then "Control Panel." Double click the "Display" icon. Select the "Settings" tab and click the "Advanced Properties" button. Select the "Monitor" tab. Click the "Change" button in the "Monitor Type" area. Choose "Specify the location of the driver." Choose "Display a list of all the driver in a specific location" then click "Next" button.
One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color Pro S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI).
Input Available Mode : PC : TV : Ext. : AV : S-Video The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. OSD Description Source List Use to select PC, TV, or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is the 'SOURCE' button. 1) PC 2) TV 3) Ext.
1) PC 2) Ext. 3) AV 4) S-Video Picture PC Mode Available Mode : PC : TV : Ext. : AV : S-Video The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. OSD Description MagicBright™ MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Text, Internet, Entertain and Custom.
Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the Brightness and Contrast by using the OSD menu. You can use the on-screen menus to change the contrast and brightness according to personal preference. 1) Contrast : Adjusts the Contrast. Custom 2) Brightness : Adjusts the Brightness. If you adjust the picture by using Custom function, MagicBright will turn to the Custom mode.
Available Mode : PC : TV : Ext. : AV : S-Video The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. OSD Description Mode The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie", and "Custom") that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select "Custom" which automatically recalls your personalized picture settings.
Sound Available Mode : PC : TV : Ext. : AV : S-Video The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. OSD Description Mode The Monitor has a built-in high fidelity stereo amplifier. 1) Standard : Choose Standard for the standard factory settings. 2) Music : Choose Music when watching music videos or concerts. 3) Movie : Choose Movie when viewing movies.
Channel Available Mode : PC : TV : Ext. : AV : S-Video The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. OSD Description Country Select the country in which the product is being used before you use the Auto Store feature. If you do not see your country in the list, select Others.
Manager you want are displayed. 2) Child Lock : Protects children from viewing inappropriate programs by blocking certain broadcast or video programs. The Child Lock feature can be selected only from the remote. Sort It's used to exchange the numbers of two channels. Name If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required.
- The direct button on the remote control is the 'SLEEP' button. Transparency Changes the opaqueness of the background of the OSD. 1) High 2) Medium 3) Low 4) Opaque Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue screen" mode to "Off". Off On Reset Picture parameters are replaced with the factory default values.
Self-Test Feature Check Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. Self-Test Feature Check | Not Optimum Mode | Display Adapter Driver Maintenance and Cleaning | Symptoms & Recommended Actions 1. Self-Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your computer and the monitor. 2.
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies that are supported by the monitor. Contact the computer dealer or manufacturer for information on safe mode booting. 3. Display Adapter Driver Display adapter refers to the computer video card driver. If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot install the monitor driver. 1. Checking Adapter Driver Click Start Settings Control Panel Display Settings Advanced Adapter.
4. Check if the scanning ratio of the video screen is set to between 60Hz. (The screen refresh rate must be set within in a range of 56~75Hz.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver. Check List The following table lists possible problems and their solutions.
Picture image is unstable and vibrates. z Ghost images are shown in the picture. The image is too light or too dark z Screen color is inconsistent. z Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes. Adjust the brightness and contrast.
Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? z z Windows XP : Set the resolution in the Control Panel→Appearance and Themes→Display→Settings. Windows ME/2000 : Set the resolution in the Control Panel→Display→Settings. * Contact the video card manufacturer for details.
General General Model Name SyncMaster 741MP LCD Panel Size 17.0 inch diagonal (43 cm) Display area 337.92 mm (H) x 270.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 31 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.2 M Resolution Optimum resolution SXGA 1280 x 1024 @ 60 Hz Maximum resolution SXGA 1280 x 1024 @ 75 Hz Input Signal, Terminated RGB Analog, Compliant Digital RGB 0.7 Vp-p ± 5%,TTL level (V high ≥ 2.0V, V low ≤ 0.
Less than 1 W Dimensions Without Stand 380 x 53 x 363.5 mm / 15.0 x 2.1 x 14.3 inch Dimensions (WxDxH)/ Weight 380 x 53 x 394.2 mm / 15.0 x 2.1 x 15.5 inch / 4.0 kg / 8.8 lbs VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.
Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.
Countries Germany Norway Spain Israel Denmark Portugal Netherlands Austria Singapore Indonesia Australia China North Korea Rumania Argentina Uruguay Paraguay Brazil SECAM Broadcasting Systems SECAM-B Countries Ireland England South Africa Hongkong SECAM-D Iran Iraq Saudi arabia Syria Lebanon Egypt SECAM-K1 Russia Hungary Bulgaria Poland SECAM-L France Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal C
General General Model Name SyncMaster 941MP LCD Panel Size 19.0 inch diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 31 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.7 M Resolution Optimum resolution SXGA 1280 x 1024 @ 60 Hz Maximum resolution SXGA 1280 x 1024 @ 75 Hz Input Signal, Terminated RGB Analog, Compliant Digital RGB 0.7 Vp-p ± 5%,TTL level (V high ≥ 2.0V, V low ≤ 0.
Less than 1 W Dimensions Without Stand 420 x 53.7 x 400 mm / 16.5 x 2.1 x 15.7 inch Dimensions (WxDxH)/ Weight 420 x 217 x 433 mm / 16.5 x 8.5 x 17.0 inch / 5.1 kg / 11.2 lbs VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.
Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.
Countries Germany Norway Spain Israel Denmark Portugal Netherlands Austria Singapore Indonesia Australia China North Korea Rumania Argentina Uruguay Paraguay Brazil SECAM Broadcasting Systems SECAM-B Countries Ireland England South Africa Hongkong SECAM-D Iran Iraq Saudi arabia Syria Lebanon Egypt SECAM-K1 Russia Hungary Bulgaria Poland SECAM-L France Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal C
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864) http://www.samsung.com/mx U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com Latin America ARGENTINE 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421 http://www.samsung.com/br CHILE 800-726-7864 (SAMSUNG) http://www.samsung.
FINLAND 09 693 79 554 http://www.samsung.com/fi FRANCE 08 25 08 65 65 (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,12/Min) http://www.samsung.de HUNGARY 06 40 985 985 http://www.samsung.com/hu ITALIA 199 153 153 http://www.samsung.com/it LUXEMBURG 02 261 03 710 http://www.samsung.lu NETHERLANDS 0900 20 200 88 (€ 0.10/Min) http://www.samsung.com/nl NORWAY 231 627 22 http://www.samsung.com/no POLAND 0 801 801 881 http://www.samsung.
the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency. Types of Sync Signals Separate This is a scheme of transmitting individual vertical and horizontal sync signals to the monitor. Composite This is a scheme of combining vertical and horizontal sync signals into one composite signal and transmitting it to the monitor.
video. VHF/UHF VHF indicates TV channels 2 to 13, and UHF indicates channels 14 through 69. Channel Fine Tuning This feature allows the viewer to fine-tune the TV channel to obtain the best viewing conditions. The Samsung LCD TV has both automatic and manual channel fine-tuning features to enable the viewer to adjust their desired settings. External Device Input External device input refers to video input from such external video devices as VCRs, camcorders and DVD players, separate from a TV broadcast.
2. TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problelms. { For example, the number of TFT LCD sub pixels contained in this product are 3,932,160. 3.
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have an image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate a correct usage of LCD products in order to protect them from Image retention. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.
Ex) The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
