User Manual SyncMaster S23A750D / S27A750D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. Microsoft and Windows are registered trademarks of Microsoft Corporation.
Before Using the Product Activities marked by this symbol are prohibited. Instructions marked by this symbol must be followed.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor with a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space z Ensure some space around the product for ventilation.An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 10 cm 10 cm 10 cm 10 cm 10 cm Precautions for storage High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby.
Before Using the Product Warning Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result. Do not plug many products into the same power socket. z Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. z Otherwise, an electric shock may result. Insert the power plug all the way in so it is not loose. z An unstable connection may cause a fire.
Before Using the Product Caution Do not unplug the power cord when the product is in use. z The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. z ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. z If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). z The product may fall and break or cause a personal injury. z Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. z ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. z The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. z ! An electric shock or fire may result. Do not drop objects on the product or apply impact. z An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. z Otherwise, the power cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. z ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. z The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. z An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. z Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: 50 cm z Straighten your back. z Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. z Adjust the angle so light does not reflect on the screen. z Keep your forearms perpendicular to your upper arms and level with the back of your hands. z Keep your elbows at about a right angle.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS 3D 2 Copyright 2 2 Icons used in this manual Symbols for safety precautions 4 Cleaning 4 5 5 Cleaning Securing the Installation Space Precautions for storage 5 Safety Precautions 5 7 9 Electricity and Safety Installation Operation 13 Correct posture to use the product 19 Checking the Contents 19 20 Removing the Packaging Checking the Components 21 Parts 21 23 23 24 25 Frontal Buttons Reverse Side Tidying Up the Connected Cables
Table Of Contents CONNECTING AND USING A SOURCE DEVICE SCREEN SETUP CONFIGURING TINT 31 Before Connecting 31 Pre-connection Checkpoints 31 Connecting the Power 32 Connecting and Using a PC 32 33 34 34 Connecting to a PC Driver Installation Setting Optimum Resolution Changing the Resolution Using a PC 36 Connecting to a Video Device 36 Connection Using the HDMI Cable 36 Connecting Headphones 37 MAGIC 37 38 39 SAMSUNG MAGIC Angle SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Color 40
Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 45 Blue 45 Configuring Blue 45 Color Tone 46 Configuring the Color Tone Settings 47 Gamma 47 Configuring Gamma 48 Size 48 Changing the Image Size 49 H-Position 49 Configuring H-Position 49 V-Position 49 Configuring V-Position 50 Menu H-Position 50 Configuring Menu H-Position 50 Menu V-Position 51 Configuring Menu V-Position 52 ECO 52 53 55 56 Eco Motion Sensor Eco Light Sensor Eco Saving Eco Icon Displa
Table Of Contents INFORMATION MENU AND OTHERS TROUBLESHOOTING GUIDE SPECIFICATIONS 60 Display Time 60 Configuring Display Time 61 Key Repeat Time 61 Configuring Key Repeat Time 62 Customized Key 62 Configuring Customized Key 62 Off Timer On/Off 62 Configuring Off Timer On/Off 63 Off Timer Setting 63 Configuring Off Timer Setting 64 Reset 64 Initializing Settings (Reset) 65 INFORMATION 65 Displaying INFORMATION 65 Configuring Brightness in the Startup Screen 65 Configuring
Table Of Contents APPENDIX 79 Contact SAMSUNG WORLDWIDE 84 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Europe only 85 Terminology INDEX Table Of Contents 18
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the Styrofoam from the product. 3 Check the components and remove the Styrofoam and plastic bag. 4 z The appearance of actual components may differ from the image shown. z This image is for reference only. Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 1.1.2 Checking the Components z Contact the dealer from whom you purchased the product if any item is missing. z The appearance of the components and items sold separately may differ from the image shown. Components Quick Setup guide Warranty (Not available In some locations) User Manual Cleaning cloth Power cable DC power adapter 3D Glasses & 3D Glasses User Manual DP cable Wire holders z Components may differ in different locations.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z If the MENU button is not visible, lightly tap the area around the [ become visible. ] button. The MENU button will z The onscreen display menu only appears when the MENU button light is lit. z The button light will remain on for 10 seconds and then dim.
1 Preparations Icons Description z Open or close the onscreen display (OSD) menu, or return to the last menu. z OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. To lock the OSD control, press the MENU button [ m ] for five seconds. m To unlock the locked OSD control, press the MENU button [ m ] for more than five seconds. If the OSD control is locked, z Brightness, Contrast and 3D can be adjusted, and INFORMATION can be viewed.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. POWER DP IN Port HDMI IN Description Connects to a source device using an DP cable. Connects to a source device using an HDMI cable. Connects to an audio output device such as headphones. Connects to the DC power adapter. 1.2.3 Tidying Up the Connected Cables Tidy up the cables using the cable holder on the back of the stand.
1 Preparations The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 1.2.4 Kensington Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
1 Preparations 1.2.5 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 20° z You can adjust the tilt of your monitor. z Hold the lower part of the product and adjust the tilt carefully.
2 3D This feature allows you to view 3D content such as 3D movies. You can view 3D content using (SyncMaster-dedicated) Samsung 3D glasses. 2.1 3D z You can purchase "SyncMaster-dedicated 3D glasses (model name: SSG-M3750CR)" separately. Contact the dealer you purchased the product from for details about purchasing the 3D glasses. z The product may not be compatible with 3D glasses other than the model specified above. z Power off the 3D glasses if you will not be using them.
2 3D Configuring the 3D Mode 1 2 3 4 Press [ m ] on the product. Press [ ] to move to PICTURE and press [ Press [ ] to move to 3D and press [ Press [ ] to move to 3D Mode and press [ ] on the product. ] on the product. ] on the product. The following screen will appear. L/R Change →2D : Off Frame Sequential Top-Bottom Side-by-Side Return Move Enter z Off: Disable the 3D Mode function. z 2D → 3D: Converts a normal video to 3D video.
2 3D 4 Press [ ] to move to L/R Change and press [ ] on the product. The following screen will appear. 3D 3D Mode : Frame Sequential L/R Change : L/R Image : R/L Image 3D→2D Return 5 6 z L/R Image z R/L Image Press [ Move ] to move to the option you want and press the [ Enter ]. The selected option will be applied. 2.1.3 3D → 2D Activates 2D screen mode. This function is turned off when 3D is 2D → 3D or Off. Configuring the 3D → 2D 1 2 3 4 Press [ m ] on the product.
2 2.2 3D Standard HDMI-Compatible Formats The 3D formats indicated below are recommended by the HDMI association and must be supported. Basic Video Signal 2.3 Standard HDMI 3D 1920x1080p @24Hz 1920x2205p @24Hz 1280x720p @60Hz 1280x1470p @60Hz Resolution Supported for PC Input (via the HDMI Port) PC input is optimized for video in 1920x1080 resolution. If the resolution is not 1920 x 1080, the 3D picture is not properly displayed and you cannot watch the 3D picture in full screen. 2.
2 3D z If the 3D glasses do not turn On even though 3D screen displays when playing a 3D game, press the 3D button to check that Frame Sequential is selected for 3D Mode. Depending on the graphics card, Frame Sequential might not be selected automatically when playing a 3D game. z Refer to "Online Help" for PC system requirements and details about how to use "SyncMaster 3D Game Launcher(TriDef 3D)".
3 3.1 Connecting and Using a Source Device Before Connecting 3.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. z Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. z 3.2 Check the types of ports at the back of the product you want to connect.
3 3.3 Connecting and Using a Source Device Connecting and Using a PC 3.3.1 Connecting to a PC z Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. z Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using an HDMI-DVI Cable HDMI 1 Connect the HDMI-DVI cable to the HDMI port on the back of the product and the DVI port on the PC.
3 Connecting and Using a Source Device Connection Using an DP Cable (Digital Type) DP IN 1 2 Connect the DP cable to the DP port on the back of the product and the DP port on the PC. Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC. Be sure to connect an audio output device such as headphones or speakers to [ ] on the product to hear audio. 3.3.
3 Connecting and Using a Source Device 3.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. DP HDMI The optimal resolution for this monitor is as follows: 1920 x 1080 60Hz Follow the above settings to set the resolution. Follow the above settings to set the resolution.
3 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel → Personalization → Display Settings and change the resolution. 1 2 3 4 *********** *********** Changing the Resolution on Windows 7 Go to Control Panel → Display → Screen Resolution and change the resolution.
3 3.4 Connecting and Using a Source Device Connecting to a Video Device z Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. z The product can be connected to a video device. Connecting parts may differ in different products. 3.4.1 Connection Using the HDMI Cable HDMI 1 2 Connect an HDMI cable to the HDMI ports on the product and video device. Press [ ] to change the input source to HDMI.
4 4.1 Screen Setup Configure the screen settings such as brightness and color tone. MAGIC This feature provides the viewing angle, brightness, and tint to suit your preferences. 4.1.1 SAMSUNG MAGIC Angle Angle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. You can enjoy similar picture quality to when you view directly in front of the product by selecting a viewing mode appropriate for each viewing angle.
4 Screen Setup Lean Back Mode 2 z ③ : Select this option to view from a place lower than Lean Back Mode 1 ② mode. 5 6 ④ : Select this option to view from a place higher than the product. z Standing Mode z Side Mode z Group View: Select this option for more than one viewer to view from places z Custom: Lean Back Mode 1 will be applied by default if Custom is selected. Press [ ⑤ : Select this option to view from either side of the product.
4 Screen Setup Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment. z In AV mode MAGIC SAMSUNG MAGIC Angle SAMSUNG MAGIC Bright SAMSUNG MAGIC Color : Off : Dynamic Standard : Movie Custom Return 5 6 Move Enter z Dynamic: This mode is suitable when the ambient light is bright. z Standard: This mode is generally suitable for any environment. z Movie: This mode reduces eye fatigue. z Custom: Customize the contrast and brightness as required.
4 Screen Setup 5 6 4.2 z Demo: Compare normal screen mode with z Full: Obtain a vivid picture quality for all areas including the flesh colors in the picture. z Intelligent: Improve the chroma for all areas except the flesh colors in the picture. Press [ Color mode. ] to move to the option you want and press the [ ]. The selected option will be applied. Brightness Adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter.
4 Screen Setup 4.3.1 Configuring Contrast 1 2 3 Press [ m ] on the product. Press [ ] to move to PICTURE and press [ Press [ ] to move to Contrast and press [ ] on the product. ] on the product. The following screen will appear. PICTURE 3D MAGIC Brightness 50 Contrast 75 Sharpness 60 Response Time Normal HDMI Black Level Low Return 4 4.4 Adjust the Contrast using the [ Adjust Enter ] button. Sharpness Make the outline of objects more clear or blurry.
4 4.5 Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. z It is best to set Response Time to Normal or Faster when you are not viewing a movie. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 4.5.1 Configuring Response Time 1 2 3 Press [ m ] on the product. Press [ ] to move to PICTURE and press [ ] on the product. Press [ ] to move to Response Time and press [ ] on the product.
4 Screen Setup 3 Press [ ] to move to HDMI Black Level and press [ ] on the product. The following screen will appear. PICTURE ▶ 3D MAGIC ▶ Brightness 75 Contrast 60 Sharpness 2200 Response Time : HDMI Black Level : Return Normal Low Move Enter z Normal: Select this mode when there is no contrast ratio degradation. z Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation.
5 Configuring Tint Adjust the tint of the screen. This option is not available when Bright is set to Cinema or Dynamic Contrast mode. 5.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This option is not available when Color is in Full or Intelligent mode. 5.1.1 Configuring Red 1 2 3 Press [ m ] on the product. Press [ ] to move to COLOR and press [ Press [ ] to move to Red and press [ ] on the product.
5 Configuring Tint 3 Press [ ] to move to Green and press [ ] on the product. The following screen will appear. COLOR Red 50 Green 50 Blue Color Tone Normal Gamma Mode1 Return 4 5.3 Adjust the Green using the [ 50 Adjust Enter ] button. Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This option is not available when Color is in Full or Intelligent mode. 5.3.
5 Configuring Tint z This option is not available when Angle is enabled. z This option is not available when Color is in Full or Intelligent mode. 5.4.1 Configuring the Color Tone Settings 1 2 3 Press [ m ] on the product. Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Color Tone and press [ ] on the product. The following screen will appear.
5 Gamma Adjust the mid-range brightness (Gamma) of the picture. This option is not available when Angle is enabled. 5.5.1 Configuring Gamma 1 2 3 Press [ m ] on the product. Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear. COLOR Red 50 Green 50 Blue Color Tone Normal Gamma 5.
6 6.1 Resizing or Relocating the Screen Size Change the picture size. 6.1.1 Changing the Image Size 1 2 3 Press [ m ] on the product. Press [ ] to move to SIZE&POSITION and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear.
6 6.2 Resizing or Relocating the Screen H-Position Move the screen to the left or right. Available only when Size is set to Screen Fit. 6.2.1 Configuring H-Position 1 2 3 Press [ m ] on the product. Press [ ] to move to SIZE&POSITION and press [ Press [ ] to move to H-Position and press [ ] on the product. ] on the product. The following screen will appear. SIZE&POSITION Image Size H-Position 50 V-Position : 50 Menu H-Position : 50 Menu V-Position 10 Return 4 6.
6 Resizing or Relocating the Screen 3 Press [ ] to move to V-Position and press [ ] on the product. The following screen will appear. SIZE&POSITION Image Size Wide H-Position 50 V-Position 50 Menu H-Position 50 Menu V-Position 10 Return 4 6.4 Adjust the V-Position using the [ Adjust Enter ] button. Menu H-Position Move the menu position to the left or right. 6.4.1 Configuring Menu H-Position 1 2 3 Press [ m ] on the product.
6 Resizing or Relocating the Screen 6.5.1 Configuring Menu V-Position 1 2 3 Press [ m ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Menu V-Position and press [ ] on the product. The following screen will appear. SIZE&POSITION Image Size Wide H-Position 50 V-Position 50 Menu H-Position 50 Menu V-Position 10 Return 4 Adjust the Menu V-Position using the [ Adjust Enter ] button.
7 7.1 Setup and Reset ECO Adjust the power consumption of the product to save energy. 7.1.1 Eco Motion Sensor The Eco Motion Sensor activates to save power when it does not detect any movement within a specified area for a specified period of time. Configuring the Eco Motion Sensor 1 2 3 4 Press [ m ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to ECO and press [ Press [ ] to move to Eco Motion Sensor and press [ ] on the product.
7 Setup and Reset Configuring Backlight 1 2 3 4 Press [ m ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to ECO and press [ Press [ ] to move to Backlight and press [ ] on the product. ] on the product. ] on the product. The following screen will appear.
7 Setup and Reset 4 Press [ ] to move to Eco Light Sensor and press [ ] on the product. The following screen will appear. ECO Eco Motion Sensor 5 Min Backlight 'LPPLQJ Eco Light Sensor Sensitivity Off On Brightness Level Eco Saving Off Eco Icon Display Off Return 5 6 Move Enter z Off z On: The Eco sensor detects the ambient illumination and automatically controls the brightness. Press [ ] to move to the option you want and press the [ ].
7 Setup and Reset 3 4 Press [ ] to move to ECO and press [ ] on the product. Press [ ] to move to Brightness Level and press [ ] on the product. The following screen will appear. ECO Eco Motion Sensor 5 Min Backlight Dimming Eco Light Sensor On Sensitivity High Brightness Level Eco Saving Eco Icon Display Return 5 6 Brighter Current ଥࢿ Dimmer Off Move Enter z Brighter: Increase the current brightness of the screen.
7 Setup and Reset 6 The selected option will be applied. 7.1.4 z This option is not available when Bright is in Dynamic Contrast mode. z This option is not available when Eco Light Sensor is enabled. Eco Icon Display Configuring the Eco Icon Display Settings 1 2 3 4 Press [ m ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to ECO and press [ Press [ ] to move to Eco Icon Display and press [ ] on the product. ] on the product. ] on the product.
7 Setup and Reset z When the screen becomes brighter as the ambient light becomes brighter and the Eco Light Sensor activates, the brightness slide bar level will increase with a sun image displayed above the bar. When the screen becomes darker, the brightness slide bar level will decrease with a moon image displayed above the bar. The brightness slide bar will be displayed for three seconds after the sensor activates.
7 Setup and Reset The progress of a tree growing will be represented as 10 different images (stages). After one z full-grown tree is complete, the initial image will be restored and the number of trees will continue to accumulate. The number for energy trees will be rounded to one decimal place. 7.2 Menu Transparency Set the transparency for the menu windows: 7.2.1 Changing Menu Transparency 1 2 3 Press [ m ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product.
7 Setup and Reset 3 Press [ ] to move to Language and press [ ] on the product. The following screen will appear. SETUP&RESET ECO Menu Transparency Language PC/AV Mode Auto Source Display Time Key Repeat Time Return 4 5 7.4 Press [ 'HXWVFK (QJOLVK (VSDxRO )UDQoDLV ,WDOLDQR 0DJ\DU 3ROVNL 3RUWXJXrV ƧNJLjLjǁƿǀ 6YHQVND 7UNoH ᣣᧄ⺆ ଞ˲߭ ∝䇁 Move Enter ] to move to the option you want and press the [ ]. The selected option will be applied. PC/AV Mode Set PC/AV Mode to AV.
7 7.5 Setup and Reset Auto Source Activate Auto Source. 7.5.1 Configuring Auto Source 1 2 3 Press [ m ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Auto Source and press [ ] on the product. ] on the product. The following screen will appear. SETUP&RESET ECO Off Language English PC/AV Mode PC Auto Source Display Time Auto Manual Key Repeat Time Acceleration Return 4 5 7.
7 Setup and Reset 3 Press [ ] to move to Display Time and press [ ] on the product. The following screen will appear. SETUP&RESET ECO Menu Transparency Off Language English PC/AV Mode PC Auto Source Display Time Key Repeat Time Return 4 5 7.7 Press [ 5 sec 10 sec 20 sec 200 sec Move Enter ] to move to the option you want and press the [ ]. The selected option will be applied. Key Repeat Time Control the response rate of a button when the button is pressed. 7.7.
7 7.8 Setup and Reset Customized Key By configuring Customized Key to suit your preferences, you can change the screen settings more conveniently. 7.8.1 Configuring Customized Key 1 2 3 Press [ m ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Customized Key and press [ ] on the product. ] on the product. The following screen will appear. SETUP&RESET Customized Key Off Timer On/Off Off Timer Setting 3D ECO MAGIC Imege Size Reset Return z 4 5 7.
7 Setup and Reset 3 Press [ ] to move to Off Timer On/Off and press [ ] on the product. The following screen will appear. SETUP&RESET Customized Key 3D Off Timer On/Off Off : On Off Timer Setting Reset Return 4 5 Move Enter z Off: Deactivate the off timer so that the product does not power off automatically. z On: Activate the off timer so that the product powers off automatically. Press [ ] to move to the option you want and press the [ ]. The selected option will be applied. 7.
7 Setup and Reset you do not want the timer to activate, go to MENU → SETUP&RESET and set Off Timer On/Off to Off. 7.11 Reset Return all the settings for the product to the default factory settings. 7.11.1 Initializing Settings (Reset) 1 2 3 Press [ m ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product. The following screen will appear.
8 8.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 8.1.1 Displaying INFORMATION 1 2 Press [ m ] on the product. Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR Digital SIZE&POSITION 67.5kHz 60Hz PP 1920 x 1080 SETUP&RESET INFORMATION Move Exit 8.
8 INFORMATION Menu and Others 1 Press [ ] in the startup screen. The following screen will appear. Volume Exit 2 Adjust the Volume using the [ 50 Adjust Enter ] button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 75). The images on the screen look distorted. Check the cable connection to the product (Refer to "3.3 Connecting and Using a PC") The screen is not clear. The screen is blurry.
9 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. z Windows XP: Select Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings. z Windows ME/2000: Select Control Panel → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer z Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and adjust the resolution. z Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution. z Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize → Display Settings and adjust the resolution.
10 Specifications 10.1 General Model Name Panel Synchroni zation S23A750D S27A750D Size 23.0 inches / 58cm 27.0 inches / 68cm Display area 509.76 mm (H) x 286.74 mm (V) 597.6 mm (H) x 336.15 mm (V) 20.1 inches (H) x 11.3 inches (V) 23.5 inches (H) x 13.2 inches (V) Horizontal Frequency 30 kHz ~ 140 kHz Vertical Frequency (DP)100 Hz,120 Hz (HDMI) 24 ~ 60 Hz Display Color 16.
10 Specifications The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. [Recommendation] - EU Only z Hereby, Samsung Electronics, declares that this [MONITOR] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. z The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
10 Specifications z The displayed power consumption level can vary in different operating conditions or when settings are changed. z To reduce the power consumption to 0 watts, turn off the power switch on the back of the product or disconnect the power cable. Be sure to disconnect the power cable when you will not be using the product for an extended period of time. To reduce the power consumption to 0 watts when the power switch is not available, disconnect the power cable.
10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product.
10 Specifications HDMI Resolution 1920 x 1080 60HZ 640 x 480 60Hz,480p 720 x 480 60Hz,480p 720 x 576 50Hz, 576p 1280 x 720 50Hz,720p Normal 1280 x 720 60Hz,720p 1920 x 1080 50Hz,1080i 1920 x 1080 60Hz,1080i 1920 x 1080 24Hz,1080p 1920 x 1080 50Hz,1080p 1920 x 1080 60Hz,1080p Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/ V) 67.500 60.000 148.500 +/+ 31.470 59.940 25.180 -/- 31.470 59.940 27.000 +/+ 31.250 50.000 27.000 +/+ 37.500 50.000 74.
10 Specifications Resolution 1920 x 1080,1080p 24Hz, FramePacking Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/ V) 54.000 24.000 148.500 +/+ 75.000 50.000 148.500 +/+ 90.000 60.000 148.500 +/+ 28.130 50.000 74.250 +/+ 33.750 60.000 74.250 +/+ 56.250 50.000 148.500 +/+ 67.500 60.000 148.500 +/+ 37.500 50.000 74.250 +/+ 45.000 60.000 74.250 +/+ 27.000 24.000 74.
10 Specifications z Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca http://www.samsung.com/ch_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINA 0800-333-3733 http://www.samsung.com BRAZIL 0800-124-421 4004-0000 http://www.samsung.
Appendix EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Zrt.
Appendix EUROPE PORTUGAL 808 20 - SAMSUNG (808 20 http://www.samsung.com 7267) RUMANIA From landline : 08010-SAMSUNG http://www.samsung.com (7267864) From landline & mobile : (+40) 21 206 01 10 SERBIA 0700 Samsung (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG http://www.samsung.com (0800-726 786) SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.
Appendix CIS UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/ hk_en/ INDIA 1800 1100 11 http://www.samsung.
Appendix MIDDlE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.
Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080 vertical lines (vertical resolution).
Index Numerics I 3D 26 INFORMATION 65 3D Mode 26 K A Kensington Lock 24 Adjusting the Product Tilt and Height 25 Appendix 79 Auto Source 60 C Changing the Resolution Using a PC 34 M MAGIC 37 O OSD control lock 22 Checking the Resolution and Frequency 67 Cleaning 4 Connecting Headphones 36 Connecting to a PC 32 Connecting to a Video Device 36 Connection Using the HDMI Cable 36 P PowerSaver 73 Precautions for storage 5 Preconnection Checkpoints 31 Contact SAMSUNG WORLDWIDE 79 Copyright 2 R Cor
Index Testing the Product 67 Tidying Up the Connected Cables 23 V Volume 65 Index 88
