SCH-R250 P O R T A B L E M O B I L E T R I - B A N D P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Samsung Telecommunications America (STA), LLC Headquarters: 1301 E. Lookout Drive Richardson, TX 75082 Toll Free Tel: Customer Care Center: 1000 Klein Rd. Plano, TX 75074 1.888.987.HELP (4357) Internet Address: http://www.samsungusa.com ©2011 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related entities.
Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries. Openwave® is a registered Trademark of Openwave, Inc. RSA® is a registered Trademark RSA Security, Inc. The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered trademarks and are wholly owned by the Bluetooth SIG.
Disclaimer of Warranties; Exclusion of Liability EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE P
Table of Contents Section 1: Getting Started ........................................ 6 Understanding this User Manual .........................................6 Installing the Battery ...........................................................8 Charging the Battery ...........................................................9 Activating Your Phone .......................................................12 Section 2: Understanding Your Phone ................... 15 Features of Your Phone .....................
Section 6: Understanding Your Contacts ............... 44 Contacts ........................................................................... 44 Adding a New Contacts Entry ........................................... 45 Finding a Contacts Entry ................................................... 49 Editing a Contacts Entry ................................................... 53 Speed Dial ....................................................................... 57 Contacts Groups .............................
Section 9: @Metro .................................................. 93 Launching @metro ...........................................................93 Applications Shopping and Downloading @metro App Store ........................................................94 Changing Your @metro Settings .......................................94 Using On-line Help ............................................................95 Section 10: Multimedia .......................................... 98 Accessing Multimedia ..
Section 13: Changing Your Settings .................... 125 Location Setting ............................................................. 125 Display Settings ............................................................. 125 Sounds Settings ............................................................. 127 Call and Phone Settings ................................................. 128 Call Settings ................................................................... 129 Phone Settings .........................
Section 15: Warranty Information ....................... 173 Standard Limited Warranty .............................................173 End User License Agreement for Software ......................180 Index ......................................................................
Section 1: Getting Started This section explains how to start using your SCH-r250 phone. Understanding this User Manual The chapters of this guide generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 189. Important safety information that you should know before using your phone is near the back of the guide, beginning on page 139.
Text Conventions To condense information in this manual, the following terms and icon appear in procedural steps: highlight Use the Navigation key ( ) to move a highlighting effect onto a menu item or screen item of interest. select ➔ After “highlighting” a menu item or screen item, press the OK key to launch, access, or save a highlighted menu item or screen field of interest. Used in place of “select” in long “drill down” procedure steps. Example: “...Settings ➔ Call Settings ➔ Call Answer...
Installing the Battery Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. Important!: You must fully charge the battery the first time you use your phone, otherwise you could damage the battery.
Removing the Battery Caution!: The display on your handset is made of glass or acrylic and could break if your handset is dropped or if it receives significant impact or excessive pressure, which could void the warranty (For more information, refer to “Standard Limited Warranty” on page 173.) Do not use if screen is broken or cracked as this could cause injury to you. Important!: You must unplug the adapter before removing the battery from the phone during charging to avoid damage.
Use the Travel Adapter The travel adapter rapidly charges your phone from any 120/220 VAC outlet. 1. Plug the large end of the Travel Adapter into a standard 120 VAC or 220 VAC wall outlet. Important!: For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage your phone and void your warranty.
2. Insert the smaller end of the Travel Adapter into the charger/ accessory connector on the lower right side of your phone. Correct Incorrect Important!: You must unplug the adapter before removing the battery from the phone during charging to avoid damage. Low battery indicator The battery indicator ( ) in the upper-right corner of the display indicates power level. Monitor the battery strength and ensure your battery is adequately charged. • Five bars ( ) indicate a full charge.
Activating Your Phone Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports. Turning Your Phone On 1. With the phone open, press the power up animation. .
Turn Your Phone Off 䊳 With the phone open, press and hold seconds. Your phone powers off. for two or more Note: If your phone is on and you press for less than one second, the phone will not power off. This prevents your phone from being turned off accidentally. Warning!: If your handset has a touchscreen display, please note that a touchscreen responds best to a light touch from the pad of your finger or a non-metallic stylus.
Listen to Voicemail 14 1. In Standby mode, press and hold or dial your own mobile number to access Voicemail. After connecting, you will hear your voice greeting. 2. You are prompted to enter your password.
Section 2: Understanding Your Phone This section lists some important features of your phone and describes the keys and the screen format. Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks).
Closed View of Your Phone Features 16 1. Volume Key — Lets you adjust the ring volume in Standby mode, adjust the voice volume during a call, or mute the ringer during an incoming call. Press and hold to light the front display. 2. Camera Lens — The lens of your built-in camera. 3. Front Display — Indicates the status of your phone, including status icons, message indicators, signal strength, and so on.
4. Headset Jack (2.7 mm) — Used to connect an optional, wired headset (for hands free operation) or optional TTY/TDD device. 4 5. Camera Key — Launches the Camera feature of your phone and takes photos. 5 6. USB Power / Accessory Connector — Used to connect charging accessories or optional USB accessory cables to your phone.
Open View (Front) of Your Phone 18
Features 1. Main Display — Indicates the status of your phone, including numbers dialed, feature and function screens, status icons, message indicators and contents, signal strength, and so on. 2. Navigation Key — In Menu mode, lets you scroll through the phone menu options. In Standby mode, lets you access preset functions and one user-defined function. 3. Left Soft Key — Used to navigate through menus and applications and to select the choice indicated at the bottom left corner of the Main LCD. 4.
10. CLR Key — Deletes characters from the display when you are in text entry mode. Press this key to return to the previous menu or screen when navigating features on your phone. 11. END Key — Ends a call. If you press and hold the END key, the power goes On or Off. When you receive an incoming call, press to send the call to voicemail. 12. Right Soft Key — Used to navigate through menus and applications and to select the choice indicated at the bottom right corner of the Main Display. 13.
Understanding the Display Screen Without Widget Bar 1. Icons indicating network and phone statues. (For more information, refer to “Display Screen Icons” on page 22.) 1 2 2. Current day of the week, date, and time. 4 3. Icon indicating that Auto Answer function is active. (For more information, refer to “Auto Answer” on page 129.) 3 5 6 4. The center of the screen shows information such as call progress indicators, messages, photos, and, in Standby Mode, Navigation key shortcut icons.
With Widget Bar 1. This line shows a shortcut icons menu that lets you launch a number of r250 applications. 2. The bottom line of the display shows current soft key functions. In this sample 1 screen, pressing the Left soft 2 key will show the Main Menu screen, pressing will launch the application related to the highlighted Widget (in this example, MetroWEB), and pressing the Right soft key will show the @metro screen.
Dialogue Boxes Dialogue boxes prompt for action, inform you of status, or warn of situations such as low battery. Dialogue boxes and their definitions are outlined below. • Choice • Example: “Save Message?” • Reconfirm • Example: “Erase All Messages?” • Performing • Example: “Sending...” “Connecting...
Backlights Backlights illuminate the displays and the keypad. When you press any key or open the phone, the backlights come on. They go off when no keys are pressed within a period of time set in the Backlight menu. Note: During a phone call, the display backlight turns off after 10 seconds to conserve battery power, regardless of the Backlight setting. For more information, refer to “Backlight” on page 127.
Section 3: Menu Navigation This section explains the menu navigation for your phone. Menu Navigation Access the menus and sub-menus in your phone using the Navigation key ( ) and soft keys ( ), or use a shortcut. 1. In Standby mode, press Menu. The first of several menus appears in the display. 2. Use the Navigation key to browse through the menus. 3. Press display. to enter the menu or sub-menu that appears in the Menu Shortcuts Use shortcuts to quickly access menus and sub-menus.
Navigation Key Shortcuts In Standby mode, press the Navigation key Up or Down to launch the corresponding applications in the pattern shown here.
Section 4: Entering Text This section outlines how to enter text using the phone keypad. This section also describes how to use the T9 predictive text entry feature to reduce the number of key strokes needed to enter text. Text Entry Modes Changing the Text Entry Mode In any text entry screen or field, the current text entry mode (T9word, T9Word, T9WORD, abc, Abc, ABC, 123, Symbols, or Emoticons) is shown in the lower left of the display.
Using T9® Mode T9 Word recognizes commonly used words matching the numeric sequence of key presses and inserts the word into your message. Text entry using T9 Word is much faster than the traditional method (Abc) and requires only one key press per letter of the word.
Adding Words to the T9 Word Dictionary If pressing the keys corresponding to a word you want to enter does not display that word, do the following: 1. Press the Left soft key and select Add T9 Word. 2. Enter the word you want to add to the T9 Word dictionary, then press ( ). The word is added to the T9 dictionary. Note: In Add T9 Word mode, you enter a word using the same multiple keypress method as when in Abc text entry mode.
Using 123 Mode Enter numbers into a text message while in 123 mode. 1. To switch to 123 mode while composing a text message, press the Left soft key, then select 123. 2. Enter numbers while in 123 mode by pressing the key labeled with the desired number. Entering Symbols Enter symbols such as “@” or “%” into a text message. 30 1. To switch to Symbols mode while composing a text message, press the Left soft key, then select Symbols. 2. The first of three symbol screens is displayed.
Section 5: Call Functions This section provides procedures for making and answering calls, and for reviewing your call time. Making a Call 1. In Standby mode, enter an area code and a phone number. 2. To make the call, press Volume key.) 3. To end the call, press Tip: To re-dial your last call, press To re-dial other recent calls, press . (Adjust the volume with the . twice. , highlight a call, and press again.
Tip: If you need to make an emergency (911) call with Airplane mode enabled, just dial the emergency number and press . (For more information, see “Airplane Mode” on page 131.) 3. To exit Emergency mode, press . You are prompted to confirm that you want to exit Emergency mode. 4. To confirm that you want to exit Emergency mode, press Yes. Three-Way Calling During a call, Three-Way Calling lets you call a third party and connect them to your existing call. 1.
Call Another Country — Shortcut Method 1. In Standby mode, press and hold until a plus sign (+) appears in the display. Note: When you press , your phone automatically replaces this + with 011, the three-digit exit code for the United States. 2. Enter the country code for the country that you are calling. 3. Enter the number that you wish to call, then press . Manual Pause Calling To manually call a number with pause(s) without storing it in your Contacts list: 1.
Tip: Press Save to store pauses along with the number if you plan to call the number frequently. Speed Dialing Speed Dialing lets you place a call to any Contact stored in your Contacts list by dialing the Contact’s Location number. 1-Touch Dialing (1 – 9) 䊳 In Standby mode, press and hold the number key (1 – 9) corresponding to the desired Contact’s speed dial number. Example: To speed dial the Contact assigned speed dial 5, press and hold . 2-Touch Dialing (10 – 99) 1.
Example: To speed dial the Contacts entry assigned to speed dial 235, press press , then press and hold . , Voice Dialing Your SCH-r250’s voice recognition let’s you speak phone numbers and Contact names in a natural manner to call them. Note: End Calls Before relaunching the VoiceSignal voice recognition software — When you use voice recognition to make a call, you must end that call before you can use other Voice Commands. See “Voice SVC” on page 118 for more information.
3. If the recognized name has multiple numbers stored for it, Voice Dial displays the possible choices and prompts you with “Which number?” Say “Home”, “Work”, or “Mobile”, and Voice Dial dials the specified number. 4. Press to exit VoiceSignal without dialing. Dialing a Number 1. In Standby mode, press and hold until “Say a command” appears in the display and plays through the earpiece. 2. Say “Call” followed by the telephone number of the person you want to call.
Tip: When you assign pictures to Contacts entries, the entry’s assigned picture appears in the display when you receive a call from that entry. (See “Assigning a Picture to a Contacts Entry” on page 55). The phone continues to notify you of the call until one of the following events occurs: • You answer the call. • The calling party ends the call. • The call is sent to voicemail. Call Answer You can set your phone to answer calls only when you press or when you press any key except , , or .
Set Call Ringer Volume 1. In Standby mode, press the Volume key on the left side of the phone up or down to set the call ringer volume as desired. 2. Once you’re satisfied with the setting, press returns to Standby mode. . The phone Note: The Vibrate icon ( ) appears in the display when the call ringer is set to Vibrate. The Vibrate/Ring icon ( ) appears in the display when you press Vibrate on. Call Waiting If you’re on a call, your phone beeps when you receive a second call.
Ignore an Incoming Call Ignored calls are immediately forwarded to Voicemail. To ignore an incoming call: 䊳 While your phone is ringing, press Ignore. The incoming call is forwarded to Voicemail. In-Use Menu You can access a number of menus and features even while in a call. 䊳 While in a call, you can: • Press Mute / Unmute to disable /enable your phone’s microphone. • Press Options. The following options pop-up in the display: – Speaker On / Off — Enables / disables Speakerphone mode during the call.
– Select a menu or feature to access the sub-menu or activate the selected feature. – Press Cancel to exit the menu. Calls Logs Your phone has Call Logs that retain information about Outgoing, Incoming, and Missed Calls for future reference, to return calls, and to add new Contacts. You can also view times for your last call and the total of all calls. 䊳 To access the Calls Logs, in Standby mode, press Menu, then select Calls.
• To access further options, press Options. The following options appear in the display: – Save — Save the number to your Contacts. – Details — Contacts calls only — Lets you view the Contacts entry for the originator or recipient of this call. – Erase — Erase the selected call from your Outgoing calls list. – Lock / Unlock — Blocks/permits erasure of the selected call from your Outgoing, Incoming, or Missed call list. – Erase all — Erase all unlocked calls from your Outgoing call list.
Call Timer Call Timer shows you the duration of your last call, total calls, and calls made during the life of your phone. Call timer is not for billing purposes. 1. From the Calls menu, select Call Timer. 2. To reset a timer, highlight it and press Reset. To reset all of the timers except Lifetime Calls, press Reset All. Note: LifeTime call timers can never be reset. 3. Press to exit the Call Timer screen.
4. Press to exit the Data Counter screen. Store Numbers from Call Logs You can store numbers from your Outgoing, Incoming, Missed, and All calls logs to your Contacts list. Tip: In Standby mode, briefly press to display the Recent Calls list. You can then select any call in the list to save to Contacts. 1. From the Calls menu, select Outgoing Calls / Incoming Calls / Missed Calls / All Calls. 2. Select the number you wish to store in Contacts. 3.
Section 6: Understanding Your Contacts This section details how you can manage your daily contacts by storing their names and numbers in your Contacts list. Note: Although the procedures in this section are written for the phone keypad, you can also perform these procedures using the QWERTY keypad. Contacts Up to 1000 entries can be stored in Contacts. Each entry can have up to five associated phone numbers and one Email address.
Adding a New Contacts Entry You can use either of three methods to add an entirely new entry to Contacts. Dial Method 1. In Standby mode, enter the number you wish to add to your Contacts. 2. Press Save. The following options appear in the display: • Create New — Lets you create a new Contacts entry. • Update Existing — Lets you add the number you entered to an existing Contacts entry. 3. Select Create New.
Add to an Existing Entry 1. From the Save screen, select Update Existing. The Update Existing screen appears in the display showing your Contacts list with the Go To field and the first Contacts entry highlighted. 2. Find and select the Contacts entry to which you want to add the new number. (See “Finding a Contacts Entry” on page 49 for more information.) 3.
Saving a Number After a Call Once you finish a call, you can store the caller’s number to your Contacts list. Note: If the call was incoming and Caller ID information was unavailable, then the Save option is also unavailable. 1. Press to end your call. The call time, length of call, phone number, and name of the party (if available) appear in the display. Press Save. The Save screen appears in the display showing the following options: • Create New — Lets you create a new Contacts entry.
Menu Method 1. From the Contacts menu, select Add New Entry. The Add New Entry screen appears in the display with the Name field highlighted. 2. 3. Enter the name of the new entry using either keypad. (See “Entering Text” on page 27 for more information.) Highlight one of the following fields: • Mobile • Pager • Ringtone • Home • Email • Fax • Work • Group 4. Enter a phone number or Email address in the highlighted field. 5. Repeat steps 3 and 4 as needed. 6.
Calls Log Method 1. Display the desired Calls log. (For more information, refer to “Calls Logs” on page 40.) 2. Highlight the Call whose number you want to add to your Contacts. 3. Press Options, and select Save. 4. Repeat Steps 2 through 6 of “Dial Method” on page 45. Finding a Contacts Entry Menu Method 1. From the Contacts menu, select Find. The Contacts Find screen appears in the display. Tip: You can also access the Contacts Find screen directly from Standby mode, by pressing Contacts. 2.
Voice Method Use the Voice SVC Lookup command to view contact information for any named contact stored in your Contacts list by saying the name. Note: The Lookup command shows the requested contact information in the display but does not dial any phone numbers for the contact. 1. In Standby mode, press and hold to launch Voice SVC. “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Lookup”. Voice SVC prompts you to “Say the name.
5. The contact information for the name you selected appears in the display. • To dial the number associated with the name, press . • To erase this entry from your Contacts list, press Erase. • To add or change information for this entry, press Edit. • For more options, press Options and the following options pop-up in the display: – Send Txt Msg – Send Pic Msg – Call – Send Name Card Via Bluetooth Quick Search Method 1.
2. Press the Navigation key Up. The Contacts Find screen appears in the display with the first matching Contact name in a list and highlighted. 3. Highlight the desired Contact and press to call them. Shortcut Key Method If you’ve stored a name entry in Contacts, Find allows you to find it quickly. 1. In Standby mode, press the Navigation key Up (Contacts shortcut). The Find screen appears in the display with the Go To field and the first Contacts entry highlighted.
Tip: You can select another number assigned to the name by using the Left/Right navigation keys. • To add or change information for this entry, press Edit. • To show information about the entry., press VIEW ( ) • For more options, press Options. Editing a Contacts Entry Editing Contacts Name and Numbers 1. Find the Contacts entry you wish to change. See “Finding a Contacts Entry” on page 49 for more information. 2. Highlight the entry and press Edit. The Edit Contact screen appears in the display. 3.
Add Pauses to Contacts Numbers Calls to automated systems such as banking services often require a password or account number. Instead of manually entering these numbers, you can store them in a Contacts entry with the phone number and with special characters called pauses, up to a maximum of 32 digits. 1. From the Edit Contact screen, select and edit the desired number. (See “Editing a Contacts Entry” on page 53 for more information.) 2. Press Options.
Pause Dial from Contacts 1. If you stored the number using 2-second pause(s), simply recall the number from Contacts. 2. If you stored the number using Wait(s), recall the number from Contacts and wait for the appropriate prompt from the dialed number. 3. Press to dial the number. Edit an Existing Email Address 1. From the Edit Contact screen, highlight the Email field. (See “Editing a Contacts Entry” for more information.) 2. Use either keypad to edit the Email address.
2. Select the picture that you wish to assign to the Contacts entry. If there is no usable picture in the photo gallery screen: • Press Camera. The camera viewfinder screen appears in the display. • Press Take. The picture you have taken appears in the display. • Press OK. The Contacts entry screen appears in the display with a thumbnail view of the selected picture in the Picture ID field. 3. Press Save to save your Picture ID assignment.
Speed Dial A Contacts entry’s Speed Dial number corresponds to the number keys you press to speed dial one of that entry’s numbers. For example: • To speed dial the Contacts entry assigned to Location 5, press and hold , (1-touch dialing). • To speed dial the Contacts entry assigned to Location 35, press then press and hold , (2-touch dialing). • To speed dial the Contacts entry assigned to Location 235, press , press , then press and hold , (3-touch dialing).
Assignment During Entry Creation To assign a Speed Call number to a new Contacts entry number, do the following: 1. Follow either of the New Contacts entry procedures (see “Adding a New Contacts Entry” on page 45) until you enter a name for the entry. 2. After entering the Contacts entry name, do not press . Instead, highlight the number field to be assigned a Speed Dial number. 3. Press Options, then select Set Speed Dial. The Speed Dial screen appears in the display. 4.
Changing a Speed Dial Location 1. Find the Contacts entry you want to edit. See “Finding a Contacts Entry” on page 49 for more information. 2. Highlight the desired entry, then press Edit. 3. Highlight the number field marked by the Speed Dial icon ( 4. Press Options, then select Remove speed dial. “Remove speed dial?” prompts you to confirm your desire to remove the entry. 5. Press Yes to remove the Speed Dial assignment.
Add Contacts Entry to a Group Using Add New/Edit Contact Option To add a Contact to a Group using either the Add New Contact option or the Edit Contact option, do the following: 1. Create a Contacts entry (see “Adding a New Contacts Entry” on page 45 for more information) that you want to add to a Group. – Or – Edit an existing Contacts entry (see “Editing a Contacts Entry” on page 53 for more information) that you want to add to a Group. 2. Highlight the Group field, then press Set.
Using Group Add Option The Add option lets you add one or more existing Contacts to a Group. 1. From the Contacts menu, select Group. The Group List screen appears in the display showing Groups similar to the following: • No Groups • Colleague • Business • Family • Friends Highlight a Group, then press Options. The following options pop-up in the display: • Send Txt Message • Send Pic Message • Rename • Erase • Add 3. Select Add.
5. When you have marked the Contacts you want to add to the group, press Done. “Contact added to group” appears in the display, followed by the selected Group list including the added Contacts. Rename a Group The Rename option lets you change the name any of the Groups, except No Groups. 1. From the Contacts menu, select Group. The Group List screen appears in the display. 2. Highlight a Group name (other than No Groups) that you wish to change, then press Options. 3. Select Rename.
Add a New Group The New option lets you add Groups. 1. From the Contacts menu, select Group. The Group List screen appears in the display. 2. Press New. The New Group screen appears in the display. 3. Enter a new group name using either keypad. (See “Entering Text” on page 27 for more information.) 4. Press Save. “Group Saved” appears in the display followed by the Group List screen showing your new Group.
Deleting a Contacts Entry 1. Find the Contacts entry you want to delete. (See “Finding a Contacts Entry” on page 49 for more information.) 2. Highlight the desired entry, then press Options and select Erase. The phone prompts you to confirm the erasure. 3. Press Yes to confirm erasure of the selected Contact. Press No to retain the Contact.
Section 7: Messages This section explains how to use your phone to exchange Text and Picture messages with compatible phones and devices. Note: Available memory is shared between all messages. You can store up to 100 messages. However, the exact number is dependent upon message length. Accessing the Messages Menu 䊳 In Standby mode, press the Navigation key Down (Messages shortcut). – or – Press Menu, then select Messages. The Messages menu appears in the display.
2. Enter the phone number or Email address of the recipient. Press Add to address your message to Contacts, Groups, or Recent Calls. 3. Press 4. Enter your message text. . The Text: appears in the display. 5. If needed, set message delivery options by pressing Options. (For more information, refer to “Message Content and Delivery Options” on page 70.) 6. Once you’re finished entering your message, press SEND ( ).
Tip: Press Add to display a pop-up menu containing: Contacts, Groups, and Recent Calls. These options allow you to find and add recipients to the Send To: list. Tip: You can send a Picture message to up to ten recipients. Enter each recipient’s address or phone number in a separate Send to field of the Picture message composer. 4. Enter a subject for the Picture message. 5. Highlight the Text: field, then enter the message text. 6. Your new picture is already in the Picture: field. 7.
8. To complete the message text and set message delivery options, press Options. (For more information, refer to “Message Content and Delivery Options” on page 70.) 9. Press Send ( ) to send the message. “Pic Msg Sending” appears in the display and a progress bar indicates the send status. Send Picture Messages in Standby Mode Send Picture messages to recipients with a compatible phone or other device, and accompany a Picture message with a voice memo, ringtone, or downloaded melody. 1.
4. Enter a subject for the Picture message. 5. Highlight the Text: field, then enter the message text. 6. For a Picture Message, highlight the Picture: field, then press Picture. A photo gallery of thumbnail images appears in the display. 7. Do one of the following: • Select a picture to add it to your message. To expand the highlighted picture for easier viewing, press View. • Include a new picture by doing the following: – Press Camera. The Camera viewfinder screen appears.
• Select Record New and record a new voice memo, then select the new recorded sound file to add it to the message. Note: If you record first before attaching a picture, you can record and insert a voice memo of up to 60 seconds in length. If you attach a picture before recording, the size of the voice memo is limited to the amount of remaining memory. • Press to exit the My Ringtones screen without selecting a sound. 10. To complete the message text and set message delivery options, press Options.
• Deferred Delivery — Directs that this message not be delivered until a selected date and time. • Delivery Ack — Choose On or Off — Requests confirmation when your message is received. • Remove Pic — Picture message only — Remove the picture from your message. • Remove Sound — Picture message only — Remove the sound file from your message. • Add To Contacts — Save the recipient’s number or Email address as a Contacts list entry.
• View Later — Saves the message to your Inbox, where you can view it later, then returns your phone to its previous mode. (For more information, refer to “Message Boxes” on page 73.) Messages and Lock Mode Your phone can still receive messages while in Lock Mode. The time and date of the message appear in the display, but you cannot access the message until you enter the lock code. Voicemail Messages in your voice mailbox are logged in the Voicemail box of the Messages menu.
Listen to Voicemail Later 1. From the Messages menu, select Voicemail. The Voicemail screen appears in the display. 2. Press OPEN. Your phone dials your voicemail account. Tip: You can also access your voicemail from Standby mode, by pressing and holding to speed call your voice mailbox. 3. Follow the voice prompts to access your voicemail messages. Message Boxes Inbox Received messages of all types (except Voicemail) are stored in the Inbox. Review Messages in the Inbox 1.
Managing Inbox Messages 1. From the Messages menu, select Inbox. The Inbox appears in the display showing a list of received messages. Highlight a message in the list, you have the following options: • To remove the highlighted message from the Inbox, press Erase. • To review the highlighted message, press OPEN ( ). • For more options, press Options. (For more information, refer to “Message List Options” on page 79.) Outbox 2.
Managing Outbox Messages 1. From the Messages menu, select Outbox. Your list of sent messages appear in the display. Highlight a message in the list, you have the following options: • To remove the highlighted message from the Inbox, press Erase. • To review the highlighted message, press OPEN ( ). • For more options, press Options. (For more information, refer to “Message List Options” on page 79.) Draft Box 2. Messages in the Draft Box are those that have been composed and saved to the Draft Box.
3. Compose your message using either keypad, press Options, then select Save As Draft. “Message saved” appears in the display and your message is saved to the Drafts box. View and Edit Draft Text Messages 1. From the Messages menu, select Drafts. A list of any draft messages that you’ve saved appears in the display. 2. Highlight a text message that you wish to view or edit, then press EDIT ( ). The Create Txt Msg screen appears in the display. 3.
4. When you have completed composing your message, press SEND ( ) to send it. Managing Draft Messages 1. From the Messages menu, select Drafts. A list of any draft messages that you’ve saved appears in the display. Highlight a message, then do one of the following: • To remove the highlighted message from the Drafts box, press Erase. • To access other options, press Options. (For more information, refer to “Message List Options” on page 79.) Message View Options 2.
OUTBOX • Play Again — Replay the sound file in a Picture message. • Forward — Send the highlighted message to another recipient. • Erase — Picture Messages Only — Delete this message from the Outbox, if the message is Unlocked. • Lock / Unlock — Block/permit erasure of the highlighted message. • Save Quick Text — Save the message text as Quick Text for insertion into other messages. • Add To Contacts — Save the recipient’s number to your Contacts.
• Save As Draft — Saves the changed message to the Draft Box. • Priority Level — Choose High, Normal, or Low. • Validity Period — Enter the Date when this message will cease to be valid, then use the Left and Right navigation keys to choose the Time. • Delivery Ack — Choose On or Off — Requests confirmation when your message is received. • Remove Pic — Remove image included in draft message. • Remove Sound — Remove sound file included in draft message.
OUTBOX – Forward — Send the highlighted message to another recipient. – Resend — Send another copy of the highlighted message to the original recipient – Lock / Unlock — Block/permit erasure of the highlighted message. – Add To Contacts — Save the recipient’s number to your Contacts. – Erase Outbox — Erase one or more selected Unlocked messages from the Outbox. – Message Info — Shows message delivery status, addressee, size, and so on.
Erase Messages You can erase all of the messages in any or all of message boxes using one convenient sub-menu. Note: This function erases all messages in the selected message box. To delete a single message, go to the respective message box, highlight the message, and press Erase. (For more information, refer to “Managing Inbox Messages” on page 74, “Managing Outbox Messages” on page 75, or “Managing Draft Messages” on page 77.) 1.
Message Settings Use the Msg Settings sub-menus to define settings for general, text, and picture messages. General Message Settings From the Messages menu, select Msg Settings ➔ General. The following options appear in the display. • Auto Save — Choose whether your messages are saved automatically when you exit them (On, Off, Prompt). • Auto Erase — Choose to receive (On) or not receive (Off) a warning message when you delete a message.
Editing and Entering Quick Text 1. From the Messages menu, select Msg Settings ➔ General ➔ Quick Text. The Quick Text sub-menu appears in the display. 2. Select a Quick Text you want to change. Note: You cannot change the pre-defined Quick Text included with your phone. 3. To create a new Quick Text, press New. Tip: You can also create new Quick Text by viewing/editing an Outbox message and using the Save Quick Text option in the Options menu.
Text Message Settings From the Messages menu, select Msg Settings ➔ Text Message. The following options appear in the display. • Auto View — On/Off — With Auto View On, the full content of a text message appears in the display as the messages is received. • Signature — Create a signature, which can be included at the bottom of outgoing message text. • Auto Scroll — On/Off — With Auto Scroll On, the full content of a text message automatically rolls upward on the display, one screen-full at a time.
Section 8: Camera Use your r250 phone to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. This section explains how you can do the following: • Take pictures with your phone’s built-in digital camera. • Send pictures taken with your phone’s camera. • Set the several options associated with the camera that help you take crisp, clear pictures.
Taking Snap Shots (Single Pictures) To take a single picture using the current camera settings, do the following: 1. In Standby mode, press and hold the Camera key ( right side of the phone. ) on the The camera view finder screen appears in the display. (For more information, refer to “Screen Layouts” on page 89.) Note: You can also activate the camera by pressing Menu, then selecting Multimedia ➔ Camera. 2. Using the display as a viewfinder, point the camera at your subject. 3.
Taking Multi Shot Pictures When taking pictures of moving subjects or subjects you cannot pose, such as children and pets, the camera’s Multi Shot mode simplifies the process of taking multiple pictures in quick succession. 1. In Standby mode, press and hold the Camera key ( ) on the right side of the phone. The camera view finder screen appears in the display. (For more information, refer to “Screen Layouts” on page 89.
5. Press Take or the Camera key ( ). The camera takes one picture (Single Shot) or lets you take multiple pictures (Series Shot or Mosaic Shot 2x2 / 3x3). 6. To save the picture(s) to memory, press Save / Done. To discard the pictures, press Cancel or . Point, Click, and Send Pictures Take a picture and send it to anyone with a compatible device in a few easy steps. 1. In Standby mode, press and hold the Camera key ( ) on the right side of the phone.
Screen Layouts Camera Screen When you activate your phone’s camera, the top two lines of the display are reserved for camera icons (when active). The center of the display shows a viewfinder image of the subject at which the camera is pointed. Camera Screen Icons The following icons appear in the Camera screen when the Icon Display Camera setting is set to Display All.
Night Shot — Indicates/changes whether your phone is ). ready to take photos in low light: Off (shown) or On ( Self Timer in use — Delays the camera shutter for 2/5/10 seconds (10 Sec. shown) after you press the Camera key ( ). Quality — Indicates/changes camera’s picture quality setting (Super Fine shown). Other options are: Fine ( ) and Normal ( ). White Balance — Indicates/changes the current photo White Balance setting [Auto (shown), Sunny ( ), Cloudy ( ), Tungsten ( ), Fluorescent ( )].
Photo Limit — Indicates the available number of photos you can take. (Depending on the camera Resolution and Quality settings.) The Photo Gallery Saved pictures are stored in the My Images folder. You can browse the pictures one at a time (expanded mode), or view several pictures at once in thumbnail format. 1. In the Camera viewfinder screen, press Gallery. Any pictures that you’ve saved are listed with their thumbnail images in the display. 2. To launch the Camera and take new pictures, press Camera.
5. 92 Select the desired option to perform its function or to enter its sub-menu.
Section 9: @Metro With Mobile Shop, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. You can send and receive instant messages and email, or browse the web to catch up on all the latest news. This section outlines how to obtain games and other applications for your phone. For more information, contact your Wireless Carrier.
Applications Shopping and Downloading @metro App Store Download games, ring tones, Email, and more using Mobile Shop. Note: For information on airtime charges, contact your Wireless Carrier. 1. At the @metro menu, select @metro App Store ( ). Note: The first time you access Mobile Shop, “Browsing online and downloading apps may incur network usage charges” appears in the display along with instructions on how to remove this message.
• Main Menu View — Select whether to view the main Mobile Shop menu in a list or icon format. • View Log — View the Mobile Shop log, which displays information about recent activity using Mobile Shop. 2. Select the desired option to enter the option’s sub-menu and view or change settings. Using On-line Help The Help sub-menu within @metro is a short tutorial on several @metro-Mobile Shop features. View information about charges, cancelling subscriptions, buying apps, disabling apps, and more. 1.
Demo Apps A Demo app is free and is designed to demonstrate the app’s main features. It usually expires after a certain period of time or a number of uses and often has limited functions. When you run a demo app, you will be presented with a purchase option so you won’t have to look for the app in the MobileShop catalog. Removing Apps You may remove apps that are no longer needed. When you remove an app, you cannot use the application unless you purchase it again.
Expired Apps Apps that were purchased based on the number of uses or time expire. You can purchase additional uses from the MobileShop catalog.
Section 10: Multimedia Use your SCH-r250 phone’s Camera to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. With Mobile Shop, you can download personalized ringtones, pictures, and more. For more information, contact your Wireless Provider. Accessing Multimedia 䊳 In Standby mode, press Menu, then select Multimedia. The following Multimedia feature sub-menus appear in the display.
• To take new photos, press Camera. • To expand an image to fill the screen, highlight it and press VIEW ( ). My Images Options From the My Images list, access other options by pressing Options. The following options appear: • Send — Send image as part of a Picture message or via Bluetooth connection to another device. (See “Send Picture Messages in Standby Mode” on page 68 for more information.
Using My Ringtones Gallery My Ringtones lets you assign Ringtones for calls, alarms, and other alerts. 1. In Standby mode, press Menu, then select Multimedia ➔ My Ringtones. A list of recorded sound files and Ringtones appears in the display. 2. Highlight a ringtone. You have the following options: • To assign the highlighted ringtone to be used as a Ringtone, a Contact ID, or an Alert Tone, press Set As. • To hear the ringtone, press Play. • For more options, press Options.
Recording a Sound File Record New lets you record sound files. 1. From the My Ringtones menu, select Record New. 2. The Record New screen appears in the display. • To start recording a sound file, press Rec ( ). • To pause/resume recording, press Pause /Resume. • To stop recording and save the sound file, press Save ( ).
Section 11: Tools This section explains how you can use your phone’s Personal Information Manager (PIM) functions to view today’s calendar, schedule appointments, set an alarm, perform simple math calculations, and more. Accessing Your Phone’s Tools To launch the Tools menu: 䊳 In Standby mode, press Menu, then select Tools.
To turn Bluetooth support on: 䊳 From the Bluetooth menu, select Bluetooth Settings ➔ Enable or select Registered List ➔ Add New Device. You are prompted to “Turn bluetooth on?” by pressing Yes. “Bluetooth set to on” and the red Bluetooth On icon ( appear in the display. ) To turn Bluetooth support off: 䊳 From the Bluetooth menu, select Bluetooth Settings ➔ Disable. “Bluetooth set to off” appears in the display and the and the Bluetooth On icon ( ) disappears.
Add (Pair With) a New Device 1. From the Registered List, select Add New Device. “Place device you are connecting to in discoverable mode” appears in the display. (See the device user manual for more information.) 2. Press 3. Highlight the device you want and press PAIR ( ). You are prompted to enter the passkey or PIN for the selected device. (See the device user manual for the passkey or PIN.) . Names of available devices appear in the display. 4. Enter the device passkey or PIN and press .
Managing Your Registered List 䊳 From the Registered List, highlight a device and press Options. The Options let you Remove or Rename this device, set Incoming Security, Discover what Bluetooth profiles apply, review Device Information, Send a Name Card (Contact information), and get files from this device. Bluetooth Settings The Bluetooth Settings menu provides the ability to view and change the device name, show the visibility, and set the security for the device.
Calendar Calendar allows you to view the current, past, or future month in calendar format. While viewing the calendar, the current date is highlighted, and days with scheduled events are surrounded by a box. View an Event 1. From the Tools menu, select Calendar. A calendar appears in the display with the current date highlighted. The month and year appear at the top of the display.
Add a New Event 1. From the Calendar, press Add. 2. To highlight New Event options, press the Navigation key Up or Down. 3. Enter the Name of the new event. (For more information, refer to “Entering Text” on page 27.) Note: The current mode of text entry is indicated in the lower left corner of the display. 4. Enter the Start Date, using leading zeros (such as, 03) and a 4-digit year (such as, 2009). Enter the Start Time, using leading zeros (such as, 03).
Memo Pad Create notes and store them in Memo Pad. Notes that you create in Return to Memo Pad anytime to review and edit your notes. Note: Memo Pad can’t be prioritized or assigned an alert. 䊳 From the Tools menu, select Memo Pad. If you have any stored memos, they appear as a list in the display. Create a Memo 1. From the Memo Pad list, press Add. 2. Enter memo text using the keypad. Tip: The current mode of text entry is indicated in the lower right corner of the display. 3.
– Press Options to Erase the memo you are viewing, Add a New Memo, or Lock/Unlock the memo you are viewing. • To Edit or Erase a memo, Erase all memos, or Lock / Unlock a memo, press Options and select the desired options. Alarm Clock Your phone lets you have up to 10 alarm clocks that can each be set to go off at a different time once, or to recur on a select day of the week. Note: The alarm doesn’t function when the phone is turned off.
When an Alarm Sounds An animated alarm clock appears in the display along with Snooze and Dismiss options and an alert sounds when the specified time for the alarm arrives. • To silence the alarm, use select Snooze or Dismiss. • If the alarm was set as a Daily alarm, the alarm icon remains in the top of the display. • If the alarm was set as a Once only alarm, the alarm icon disappears from the top of the display. Turn Off the Alarm 1. From the Tools menu, select Alarm Clock. 2.
䊳 From the Tools menu, select World Time. A world map appears in the display, showing the time and date in one or two cities or time zones. Selecting/Displaying Time Zones World Time lets you view the time and date in up to two locations or time zones. Viewing a Time Zone To view the time and date in a particular time zone or location, do the following: 䊳 Locate and view a particular time zone by pressing the Navigation key Left or Right until the desired time zone appears in the display.
Selecting a Home Zone To change home (upper) time zone or location, do the following: 1. In the World Time screen, display the time zone you wish to make your Home Zone. 2. Press Options and select Set as home zone. Enable Daylight Saving Time (DST) 1. Display the desired time zone. 2. Press DST Off / DST On. 3. To accept the highlighted setting, press . Calculator You can perform calculations, including addition, subtraction, multiplication and division using your phone.
• To add parentheses [( )] to your calculation or to enter a Power exponent (^), such as, 3^2, which is the equivalent of 32, press Operator. • Press Clear to clear current entries. 3. Select a type(s) of calculation. • [ x ] Multiplication — Press Navigation key Up. • [ ÷ ] Division — Press Navigation key Down. • [ + ] Addition — Press Navigation key Right. • [ - ] Subtraction — Press Navigation key Left. 4. Enter the other number(s) and press to perform the calculation and view the result.
Converter The Converter lets you covert one measure of the available categories (Currency, Length, Weight, Volume, Area, and Temperature) into another. 1. From the Tools menu, select Converter ➔ Currency / Length / Weight / Volume / Area / Temperature. 2. Use the Navigation/Arrow keys to select the units to be converted From and To. 3. Enter the quantity you want converted in the From field. The converted quantity appears in the To field. Note: To include a decimal point, press .
Currency — Adding Exchange Rates You can use the Currency Converter to convert from and to obscure currencies by adding exchange rates for these currencies. 1. From the Tools menu, select Converter ➔ Currency. 2. To open the EXCHANGE RATE list, press Rate. 3. Press Add. The ADD EXCHANGE RATE screen appears in the display with the Base field highlighted. 4. Use the Left and Right navigation/arrow keys to select the Base currency to be converted from. 5.
Currency — Erasing Exchange Rates You cannot erase the preloaded currencies from the Exchange Rate list. You can erase a currency that you have added to the list by doing the following: 1. From the Tools menu, select Converter ➔ Currency. 2. Press Rate. The EXCHANGE RATE list for the From currency appears in the display. 3. Use the Up and Down navigation keys to highlight the useradded currency exchange rate to be erased. 4. Press Erase. You are prompted to confirm the erasure.
Tip Calculator Tip Calculator automatically calculates the following amounts: • Gratuity (tip) • Individual payment (for groups) 1. From the Tools menu, select Tip Calculator. The Tip Calculator screen appears in screen, with the Bill field highlighted. 2. Use the keypad to enter the total amount of the bill. 3. If needed, highlight the Tip field, and enter a tip percentage. 4. If needed, highlight the # Paying field, and enter the number of persons paying. 5.
Section 12: Voice SVC Voice SVC Options Your SCH-r250 includes Nuance Vsuite, state-of-the-art voice recognition software that lets you use your voice to dial numbers, access your Contacts list, and open Tools. To access your phone’s voice recognition, do the following: In Standby mode, select Menu ➔ Voice SVC. The following options appear in the display: • Voice Command — Lets you place calls, access your Contacts List, review your appointments, and more by speaking commands into your phone.
Note: You can also set your phone to start VoiceSignal when you connect an optional headset to the phone. (For more information, see “Voice Launch” on page 124..) The following voice commands appear in the display: • Call — Call a Contact by saying the name saved in your Contacts list. Call any telephone number, even if not saved in your Contacts list, by saying the digits in the number. (See “Voice Dialing” on page 35 for more information.) • Send Text — Lets you access Create Text Message.
Voice Settings To access the Voice Settings menu: 䊳 From the Voice SVC menu, select Voice Settings. Choice Lists When Vsuite cannot recognize a name or number, it displays a choice list of up to three possible choices, and prompts you to confirm the correct one. To change the way Vsuite uses choice lists: From the Voice Settings menu, select Choice Lists. The available options are: • Automatic — Vsuite displays a choice list only when it does not recognize a spoken name or number.
Digit Dialing If you regularly have trouble with Vsuite not recognizing the numbers you speak, adapting can improve the accuracy of digit recognition, especially for people with strong regional accents. Note: After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will not be able to use it unless they Reset the phone to factory defaults. Tips for Adapting Digit Dialing: • Use Adapt Digits in a quiet place. • Wait for the beep before starting to speak.
Adapt Digits To adapt digit dialing, do the following: 1. From the Voice Settings menu, select Digit Dialing ➔ Adapt Digits. Your phone displays text describing the Adapt Digits process. 2. Press . Your phone displays the first digit sequence and “Please say” plays through the speaker followed by the four digits appearing in the display. 3. Wait for the beep and say the digits using your normal tone of voice.
Reset Digits To reset digit dialing to factory default settings, do the following: 1. From the Voice Settings menu, select Digit Dialing ➔ Reset Digits. The phone prompts you to confirm digit reset. 2. Press OK to reset your digit adaptation, or press Back to cancel. Sound Sound lets you specify what (if any) text prompts you want your phone to read to you through the earpiece. From the Voice Settings menu, select Sound.
Voice Launch To set the key or action that launches Nuance Vsuite, do the following: From the Voice Settings menu, select Voice Launch. The following options appear in the display: • Key Only — Press and hold to activate Vsuite for one call. • Key/Ear Mic — Attach a headset to your phone. Press and hold to activate Vsuite. Now, you can make and end calls using VoiceSignal by pushing the button on the headset. 2. Press to accept the new setting.
Section 13: Changing Your Settings This section explains how to configure your phone’s language, network preferences, security options, and other settings. To launch the Settings menu: 䊳 In Standby mode, press Menu, then select Settings. The Settings menu appears in the display. Location Setting You can set your phone to pass Global Positioning System (GPS) data to identify your location to the network continually (Location On) or only when you make an emergency (911) call (911 Only).
Wallpaper Wallpaper lets you choose images to appear in the background on your phone’s Main Display and Front Display while in Standby mode. You can choose from downloaded images in your My Images folder or from the Preset Images folder. Note: When you select Front Display, your Wallpaper selection automatically changes the Clock Format setting for the Front Clock to Off. (For more information, refer to “Clock Format” on page 126.
Banner Create your own 13-character personal greeting that appears in the display while your phone is in Standby mode. Tip: Press and hold to erase an existing banner, if necessary. (For more information, refer to “Entering Text” on page 27.) Backlight You can separately set the Main Display, Keypad, and/or Charging backlight to remain on for 10, 15, or 30 seconds; to be Always On as long as the folder is open; or to be Always Off.
Master Volume Use the Master Volume screen to set the default volume for Voice Calls ringers, Messages alerts, and Alarms to the desired level (Silence All, Low, Low/Medium, Medium, Medium/High, or High) or vibrate mode (Vibrate, or Vib. on / Vib. off soft key). Ringer Type Use the Ringer Type sub-menu to select ringtones, melodies, or recorded sounds to play as ringers for Voice Calls, Messages (Text, Picture, and Voicemail), and Roam Ringer alerts.
Call Settings The Call Settings sub-menu lets you set call options such as Auto Retry, Data rates for data calls, and more. Call Answer You can set your phone to answer incoming calls only when you press ; when you press any key on the keypad except , , or ; or when you open the flip. Auto Answer Auto Answer lets you set your phone to automatically answer calls after from 1 to 5 seconds.
TTY Mode Your phone is fully Teletypewriter (TTY)/Telecommunication Device for the Deaf (TDD) compatible. You connect TTY/TDD equipment to the headset connector on the top of your phone, behind the folder hinge. You can set your phone to allow TTY/TTD communication while you converse with the other party, or you can limit voice communication to Talking or Hearing only. Note: TTY Mode must be enabled before you can use your phone with TTY/TDD equipment.
Hearing Aid Mode Hearing Aid Mode lets you power Off (default value — to save power) or power On your phone’s Hearing Aid compatibility functions. Phone Settings You can set or reset the operating characteristics of your phone to suit your location and/or to limit access to your phone. Airplane Mode When set to On, Airplane Mode disables all radio functions of your phone.
Security Use the Security sub-menu to lock your phone, set up emergency numbers, enable or disable voice privacy, set restrictions, and other security options. To access the Security sub-menu, you are prompted to enter your phone’s four-digit lock code. Note: The default lock code is the last four digits of your mobile phone number. Lock Phone The Lock Phone option lets you Lock or Unlock your phone immediately or set your phone to lock itself On Power Up.
Auto Device Lock Auto Device Lock lets you set your phone to automatically lock itself when the display backlight shuts off. Change Lock Change Lock lets you replace your phone’s default lock code (the last four digits of your phone number) with one of your own choosing. It is advisable to change the default lock code to a secret code for security purposes.
Emergency # The Emergency # option lets you enter and store up to three emergency numbers in your phone. Each number can be up to 32 digits long. You can dial your emergency numbers any time, even when your phone is locked or restricted. Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted. If you call 911 you will hear audible tone and an Emergency prompt will appear in the display for the duration of the call.
• To store emergency numbers: Select the Emergency # option, then select one of the three emergency number options, and enter and save your new emergency number. • To call emergency numbers (even in lock mode): Simply enter 911 or one of your emergency numbers and press to place the call. Reset Phone The Reset Phone option returns all settings on your phone (except for Contacts entries) to their factory default values. Caution!: Before selecting Reset Phone, contact your Wireless Carrier.
NAM Selection The NAM Selection option lets you select your preferred system (NAM 1 or NAM 2), provided your phone has a NAM 2 number programmed into it. (For more information, contact your Wireless Provider.) Important!: If after setting your phone to Lock itself On Power Up, you change the NAM Selection setting from NAM 1 to NAM 2, but there is no number programed into NAM 2, you won’t be able to access your phone. You must call your Wireless Provider’s Service Center to unlock your phone.
• Enter the current Time using your keypad: – The hour and minute must be entered using two digits each. You must enter the hour in 12-hour format. – Use the Left and Right navigation keys to select am or pm. Speed Dial The Speed Dial option lets you disable (Off) or enable (On) speed dialing of Contacts. (For more information, refer to “Speed Dial” on page 57.) Quick Search When set to On, the Quick Search option provides an easy way to find Contacts from Standby mode.
Phone Info Phone Info lets you review the phone number assigned to your phone; lets you reference the meanings of icons that appear on your phone’s Standby mode screen; lets you identify the hardware and software versions of your phone, the @metro software, and the assigned MEID number (in Decimal and Hexadecimal formats); and lets you review the Open Source License for this phone.
Section 14: Health and Safety Information This section outlines the safety precautions associated with using your phone. The terms “mobile device” or “cell phone” are used in this section to refer to your phone. Read this information before using your mobile device. Exposure to Radio Frequency (RF) Signals The U.S. Food and Drug Administration (FDA) has published information for consumers relating to Radio Frequency (RF) exposure from wireless phones.
The low levels of RF cell phones emit while in use are in the microwave frequency range. They also emit RF at substantially reduced time intervals when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. The biological effects of radio frequency energy should not be confused with the effects from other types of electromagnetic energy.
Research Results to Date: Is there a connection between RF and certain health problems? The results of most studies conducted to date say no. In addition, attempts to replicate and confirm the few studies that have shown a connection have failed. The scientific community at large therefore believes that the weight of scientific evidence does not show an association between exposure to Radio Frequency (RF) from cell phones and adverse health outcomes.
about Interphone can be found at http://com.iarc.fr/en/media-centre/pr/. Interphone is the largest cell phone study to date, but it did not answer all questions about cell phone safety. Additional research is being conducted around the world, and the FDA continues to monitor developments in this field.
Surveillance, Epidemiology, and End Results (SEER) Program of the National Cancer Institute The National Cancer Institute (NCI) actively follows cancer statistics in the United States to detect any change in rates of new cases for brain cancer. If cell phones play a role in risk for brain cancer, rates should go up, because heavy cell phone use has been common for quite some time in the U.S. Between 1987 and 2005, the overall ageadjusted incidence of brain cancer did not increase.
Reducing Exposure: Hands-Free Kits and Other Accessories Steps to Reduce Exposure to Radio Frequency Energy If there is a risk from being exposed to radio frequency energy (RF) from cell phones - and at this point we do not know that there is - it is probably very small. But, if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your RF exposure.
comfort. They are also required by law in many states if you want to use your phone while driving. Cell Phone Accessories that Claim to Shield the Head from RF Radiation Because there are no known risks from exposure to RF emissions from cell phones, there is no reason to believe that accessories which claim to shield the head from those emissions reduce risks.
example, The Stewart Report from the United Kingdom made such a recommendation in December 2000. In this report, a group of independent experts noted that no evidence exists that using a cell phone causes brain tumors or other ill effects. Their recommendation to limit cell phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.
• US Food and Drug Administration: http://www.fda.gov/Radiation-EmittingProducts/ RadiationEmittingProductsandProcedures/ HomeBusinessandEntertainment/CellPhones/default.htm. Specific Absorption Rate (SAR) Certification Information Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for Radio Frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government.
The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements. SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: • Head: 0.53 W/Kg. • Body-worn: 0.80 W/Kg. SAR information on this and other model phones can be viewed online at http://www.fcc.gov/oet/ea. To find information that pertains to a particular model phone, this site uses the phone FCC ID number which is usually printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number.
your ability to concentrate on the act of driving becomes impaired. Samsung is committed to promoting responsible driving and giving drivers the tools they need to understand and address distractions. Check the laws and regulations on the use of mobile devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. For example, only hands-free use may be permitted in certain areas.
sure to consult the state and local laws or ordinances where you drive before mounting this device in an automobile. Failure to comply with these restrictions could result in fines, penalties, or other damages. Never mount this device in a manner that will obstruct the driver's clear view of the street and traffic. Never use wireless data services such as text messaging, Web browsing, or e-mail while operating a vehicle.
wet, have them checked by your service provider or contact Samsung, even if they appear to be working properly. • Do not place your battery in or near a heat source. Excessive heating can damage the phone or the battery and could cause the phone or the battery to explode. Do not dry a wet or damp battery with an appliance or heat source such as a microwave oven, hair dryer, iron, or radiator. Avoid leaving your phone in your car in high temperatures. • Do not dispose of the phone or the battery in a fire.
Important!: Use only Samsung-approved batteries, and recharge your battery only with Samsung-approved chargers which are specifically designed for your phone. Warning!: Use of a non-Samsung-approved battery or charger may present a risk of fire, explosion, leakage, or other hazard. Samsung's warranty does not cover damage to the phone caused by non-Samsung-approved batteries and/or chargers. • Do not use incompatible cell phone batteries and chargers.
Recycling programs for your mobile device, batteries, and accessories may not be available in your area. We've made it easy for you to recycle your old Samsung mobile device by working with respected take-back companies in every state in the country. Drop It Off You can drop off your Samsung-branded mobile device and batteries for recycling at one of our numerous Samsung Recycling Direct (SM) locations. A list of these locations may be found at: http:/ /pages.samsung.
your old mobile device or battery to the address listed, via U.S. Mail, for recycling. Dispose of unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278-0799. Follow local regulations regarding disposal of mobile devices and batteries Dispose of your mobile device and batteries in accordance with local regulations.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION.
damage the tempered glass surface and void the warranty. For more information, refer to “Standard Limited Warranty” on page 173. GPS & AGPS Certain Samsung mobile devices can use a Global Positioning System (GPS) signal for location-based applications. A GPS uses satellites controlled by the U.S. Government that are subject to changes implemented in accordance with the Department of Defense policy and the 2008 Federal Radio navigation Plan (FRP).
may be shared with third-parties, including your wireless service provider, applications providers, Samsung, and other third-parties providing services. Use of AGPS in Emergency Calls When you make an emergency call, the cellular network may activate AGPS technology in your mobile device to tell the emergency responders your approximate location. AGPS has limitations and might not work in your area.
programmed functions, which cannot guarantee connection in all conditions, areas, or circumstances. Therefore, you should never rely solely on any wireless mobile device for essential communications (medical emergencies, for example). Before traveling in remote or underdeveloped areas, plan an alternate method of contacting emergency services personnel. Remember, to make or receive any calls, the mobile device must be switched on and in a service area with adequate signal strength.
Care and Maintenance Your mobile device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years: Keep your Samsung Mobile Device away from: Liquids of any kind Keep the mobile device dry. Precipitation, humidity, and liquids contain minerals that will corrode electronic circuits.
Microwaves Do not try to dry your mobile device in a microwave oven. Doing so may cause a fire or explosion. Dust and dirt Do not expose your mobile device to dust, dirt, or sand. Cleaning solutions Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the mobile device. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. Shock or vibration Do not drop, knock, or shake the mobile device. Rough handling can break internal circuit boards.
loss. Some scientific research suggests that using portable audio devices, such as portable music players and cell phones, at high volume settings for long durations may lead to permanent noiseinduced hearing loss. This includes the use of headphones (including headsets, earbuds, and Bluetooth® or other wireless devices). Exposure to very loud sound has also been associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to sound, and distorted hearing.
You should follow some common sense recommendations when using any portable audio device: • Always turn the volume down before plugging the earphones into an audio source. • Set the volume in a quiet environment and select the lowest volume at which you can hear adequately. • Be aware that you can adapt to higher volume settings over time, not realizing that the higher volume may be harmful to your hearing.
• Do not listen at any volume that causes you discomfort. If you experience ringing in your ears, hear muffled speech, or experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your doctor. You can obtain additional information on this subject from the following sources: American Academy of Audiology 11730 Plaza American Drive, Suite 300 Reston, VA 20190 Voice: (800) 222-2336 Email: info@audiology.org Internet: http://www.audiology.
National Institute for Occupational Safety and Health (NIOSH) 395 E Street, S.W. Suite 9200 Patriots Plaza Building Washington, DC 20201 Voice: 1-800-35-NIOSH (1-800-356-4674) 1-800-CDC-INFO (1-800-232-4636) Outside the U.S. 513-533-8328 Email: cdcinfo@cdc.gov Internet: http://www.cdc.gov/niosh/topics/noise/default.
shielded against the RF signals from your wireless mobile device. Consult the manufacturer to discuss alternatives. Implantable Medical Devices A minimum separation of six (6) inches should be maintained between a handheld wireless mobile device and an implantable medical device, such as a pacemaker or implantable cardioverter defibrillator, to avoid potential interference with the device.
obtaining this information. Switch your mobile device off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle before using your mobile device in a motor vehicle.
areas where the air contains chemicals or particles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. FCC Hearing Aid Compatibility (HAC) Regulations for Wireless Devices On July 10, 2003, the U.S.
The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated mobile device successfully. Trying out the mobile device with your hearing device is the best way to evaluate it for your personal needs.
A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for best use. M3 + M2 = 5 T3 + T2 = 5 In the above example, if a hearing aid meets the M2 level rating and the wireless mobile device meets the M3 level rating, the sum of the two values equal M5. This is synonymous for T ratings. This should provide the hearing aid user with “normal usage” while using their hearing aid with the particular wireless mobile device.
Restricting Children's Access to Your Mobile Device Your mobile device is not a toy. Do not allow children to play with it because they could hurt themselves and others, damage the mobile device, or make calls that increase your mobile device bill. Keep the mobile device and all its parts and accessories out of the reach of small children. FCC Notice and Cautions FCC Notice The mobile device may cause TV or radio interference if used in close proximity to receiving equipment.
complex piece of equipment and can be broken. Avoid dropping, hitting, bending, or sitting on it. Other Important Safety Information • Only qualified personnel should service the mobile device or install the mobile device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. • Ensure that any mobile devices or related equipment installed in your vehicle are securely mounted.
Section 15: Warranty Information Standard Limited Warranty What is covered and for how long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC (“SAMSUNG”) warrants that SAMSUNG’s handsets and accessories (“Products”) are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase by the first consumer purchaser and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Case/Pouch/Holster 90 Days Othe
use of a metallic object when pressing on a touch screen; (d) equipment that has the serial number or the enhancement data code removed, defaced, damaged, altered or made illegible; (e) ordinary wear and tear; (f) defects or damage resulting from the use of Product in conjunction or connection with accessories, products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (g) defects or damage resulting from improper testing, operation, maintenance, installation, service, or adjustment n
option, without charge. SAMSUNG may, at SAMSUNG’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product, or may replace the Product with a rebuilt, reconditioned or new Product. Repaired/replaced cases, pouches and holsters will be warranted for a period of ninety (90) days. All other repaired/replaced Products will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for ninety (90) days, whichever is longer.
service, as some or all of the contents may be deleted or reformatted during the course of warranty service. What are the limits on SAMSUNG’s liability? THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF SAMSUNG’S RESPONSIBILITIES, AND THE EXCLUSIVE REMEDY REGARDING THE PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE. RESPONSIBILITY FOR THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRDPARTY SOFTWARE OR EQUIPMENT RESTS SOLELY WITH THE USER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRDPARTY SOFTWARE OR EQUIPMENT.
circumstances proceed as part of a class action. The arbitration shall be conducted before a single arbitrator, whose award may not exceed, in form or amount, the relief allowed by the applicable law. The arbitration shall be conducted according to the American Arbitration Association (AAA) Commercial Arbitration Rules applicable to consumer disputes. This arbitration provision is entered pursuant to the Federal Arbitration Act.
parties, reasonable attorney fees, expert witness fees and costs. Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction. This arbitration provision also applies to claims against SAMSUNG’s employees, representatives and affiliates if any such claim arises from the Product’s sale, condition or performance.
Severability. If any portion of this Limited Warranty is held to be illegal or unenforceable, such partial illegality or unenforceability shall not affect the enforceability of the remainder of the Limited Warranty. Samsung Telecommunications America, LLC 1301 E. Lookout Drive Richardson, Texas 75082 Phone: 1-800-SAMSUNG Phone: 1-888-987-HELP (4357) ©2011 Samsung Telecommunications America, LLC. All rights reserved. No reproduction in whole or in part allowed without prior written approval.
OTHERWISE DISABLE THE “I ACCEPT”, AND STILL INSTALL, COPY, DOWNLOAD, ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE “DECLINE” BUTTON, AND DISCONTINUE USE OF THE SOFTWARE. 1. GRANT OF LICENSE.
such activity is expressly permitted by applicable law notwithstanding this limitation), or modify, or disable any features of, the Software, or create derivative works based on the Software. You may not rent, lease, lend, sublicense or provide commercial hosting services with the Software. 4. CONSENT TO USE OF DATA.
materials, any upgrades, this EULA) and you may not retain any copies of the Software. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end user receiving the Software must agree to all the EULA terms. 7. EXPORT RESTRICTIONS. You acknowledge that the Software is subject to export restrictions of various countries. You agree to comply with all applicable international and national laws that apply to the Software, including the U.S.
unsatisfactory quality, performance, accuracy and effort is with Purchaser. It is up to Purchaser to take precautions to ensure that whatever Purchaser selects to use is free of such items as viruses, worms, Trojan horses, and other items of a destructive nature.
USE OF, OR OTHERWISE RESPECTING, THE CONTENT OF ANY THIRDPARTY APPLICATION WHETHER SUCH THIRD-PARTY APPLICATION IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG, IS DOWNLOADED, OR OTHERWISE OBTAINED. USE OF ANY THIRDPARTY APPLICATION IS DONE AT PURCHASER’S OWN DISCRETION AND RISK AND PURCHASER IS SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOADING OR USE OF SUCH THIRD-PARTY APPLICATIONS.
THIRD-PARTY APPLICATION WILL MEET PURCHASER’S REQUIREMENTS, THAT THE OPERATION OF THE THIRD-PARTY APPLICATION WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE THIRD-PARTY APPLICATION WILL BE CORRECTED. PURCHASER ASSUMES THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW EXCLUSIONS OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
NOTWITHSTANDING THE FOREGOING, SAMSUNG’S TOTAL LIABILITY TO PURCHASER FOR ALL LOSSES, DAMAGES, CAUSES OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF PURCHASER’S USE OF THIRD-PARTY APPLICATIONS ON THIS MOBILE DEVICE, OR ANY OTHER PROVISION OF THIS EULA, SHALL NOT EXCEED THE AMOUNT PURCHASER PAID SPECIFICALLY FOR ANY SUCH THIRD-PARTY APPLICATION THAT WAS INCLUDED WITH THIS MOBILE DEVICE.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire agreement between you and Samsung relating to the Software and supersedes all prior or contemporaneous oral or written communications, proposals and representations with respect to the Software or any other subject matter covered by this EULA. If any provision of this EULA is held to be void, invalid, unenforceable or illegal, the other provisions shall continue in full force and effect.
Index Symbols @metro Applications Shopping and Downloading 94 Launching 93 On-line Help 95 Settings 94 A Accessing Call and Phone Settings 128 Accessing Your Phone’s Tools 102 Adding a New Contacts Entry Dial Method 45 Menu Method 48 Adjust Key Tone 128 Alarm Clock When an Alarm Sounds 110 Alarm clock Turn Off the Alarm 110 Alerts 128 Apps Buying 95 Disabled 96 Expired 97 Removing 96 189
Restoring 96 Auto Answer 129 Auto Retry 129 B Backlight 127 Banner 127 Battery 8 Charging 9 Low Battery Indicator 11 Removal 9 Travel Adapter 10 Battery Use & Safety 151 C Calculator 112 Calendar View an Event 106 Call and Phone Settings Menu Accessing 128 Call Answer 37 129 Call Functions Answering a Call 36 Making a Call 31 Call Notification Types 37 Call Settings Auto Answer 129 Auto Retry 129 , 190
Call Answer 129 TTY Mode 130 Voice Privacy 130 Call Timer 42 Call Waiting 38 Calls Call Timer 42 Data Counter 42 Erase Logs 41 Incoming 40 Missed 40 Outgoing 40 Store Numbers 43 Calls Menu 40 Camera Photo Gallery 91 Taking Pictures 85 Canned Message Text Editing and Entering 83 Care and Maintenance 160 Change Lock 133 Children and Cell Phones 145 Contacts 44 Add Pauses 54 Adding 45 Deleting 64 191
Edit Name and Numbers 53 Editing 53 Erase All 135 Finding 49 Groups 59 Memory Info 64 Opening 44 Saving Call Numbers 47 Speed Dial 57 Create Messages 65 D Data Counter 42 Data, View Counters 42 Dialing Font Size 126 Display 125 Display / Touch-Screen 156 Display Screen Icons 22 Display Setting Dialing Font 126 Display Settings Backlight 127 Banner 127 Dialing Font Size 126 Front Contrast 127 Theme 126 Wallpaper 126 192
Do cell phones pose a health hazard? 139 Draft Folder 75 Draft Messages 75 E Edit Contacts Name and Numbers 53 Emergency 134 Emergency #s in Lock Mode 135 Emergency Calls 158 Emergency Numbers 134 Entering Text Entering Symbols 30 Using Abc Mode 29 Using T9 Mode 28 Erase All Entry 135 Erase Logs 41 Erase Messages 81 Exposure to Radio Frequency (RF) Signals 139 F FCC Hearing Aid Compatibility (HAC) Regulations for Wireless Devices 168 FCC Notice and Cautions 171 G Gallery, photo 91 General Message Setting
Understanding this User Manual 6 Voicemail 13 Go Back One Menu 25 GPS & AGPS 157 GPS Setting 125 H Health and Safety Information 139 I Icons Number Type 45 46 Ignore Calls 39 Inbox Folder 73 Inbox, Reviewing Messages 73 Incoming Calls Menu 40 International Calls 32 , L Language 131 Lock Code, Changing 133 Lock Phone 132 M Memory Info 137 Memory Management 137 Message Folder Draft Box 75 Inbox 73 Outbox 74 194
Voice 72 Voicemail 72 Message folder outbox 74 Message Folders Erase Messages 81 Message Settings, General 82 Messages Creating 65 Messages and Lock Mode 72 Missed Calls Menu 40 Msg Setting Sub Menu 82 N Navigation Key Shortcuts 26 Notes and Tips 6 Notes, Description 6 Number Type Icons 45 46 , O Operating Environment 165 Other Important Safety Information 172 Outbox Folder 74 Outbox, Reviewing Messages 74 Outgoing 40 , P Pause Dial 33 55 Pauses, Adding 54 195
Phone Settings Airplane Mode 131 Language 131 NAM Selection 136 Quick Search 137 Security 132 Set Time 136 System Select 136 Photos Sending 88 Taking Multi Shot Pictures 87 Taking Snap Shots 86 Picture Message Settings 84 Picture Messages Send in Camera Mode 66 R Receive Text Messages 71 Reducing Exposure Hands-Free Kits and Other Accessories 144 Reset Your Phone 135 Responsible Listening 161 Restricting Children's Access to Your Mobile device 171 Restriction 135 Return to Last Menu 25 Reviewing Inbox 73 R
Ringer Type 128 S Samsung Mobile Products and Recycling 153 Save a Number After a Call 47 Screen Layouts 89 Security Settings Change Lock 133 Emergency # 134 Erase All Entries 135 Lock Phone 132 Reset Phone 135 Restriction 135 Security Sub Menu 132 Settings Auto Answer 129 Auto Retry 129 Backlight 127 Banner 127 Call Answer 129 Language 131 Location Setting 125 Memory Info 137 Ringer Type 128 TTY Mode 130 Voice Privacy 130 Volume 128 197
Wallpaper 126 Settings, Picture Messages 84 Settings, Text Messages 84 Silence Ringer 38 Smart Practices While Driving 149 Sound Settings Ringer Type 128 Volume 128 Specific Absorption Rate (SAR) Certification Information 147 Standard Limited Warranty 173 Store Emergency #s 135 Store Numbers After a Call 47 T Taking pictures 85 Text Conventions 7 Text Entry Mode 27 Changing 27 Text Message Settings 84 Text Messages, Receiving 71 Three-Way Calling 32 Timer, Calls 42 Tip, Description 6 Tools Add New Event 10
Memo Pad 108 World Time 110 Tools Menu Accessing 102 TTY Mode 130 U UL Certified Travel Charger 155 Understanding Your Contacts Adding a New Contacts Entry 45 Contacts Groups 59 Deleting a Contacts Entry 64 Editing an Existing Contacts Entry 53 Finding a Contacts Entry 49 Memory Info 64 Save a Number After a Call 47 Speed Dial 57 Understanding Your Phone Closed View of Your Phone 16 Display Screen 21 Features of Your Phone 15 Open View of Your Phone 18 V View an Event, Calendar 106 Voice Privacy 130 Voice
Choice Lists 120 Sensitivity 120 Sound 123 Voice Launch 124 Voicemail Checking 72 Folder 72 Listening to 14 Volume 128 W Wallpaper 126 Warranty Information 173 World Time 110 200
