User Manual

21
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Color tone, Contrast, Brightness, Color, Sharpness, Tint
(NTSC only)
1 Press the MENU button.
Result: The “Picture” menu is displayed.
2 Press the + or – button.
3 Press the ▲ or ▼ button to select the “Adjust”, and then press the +
or – button.
Result: The “Adjust” menu is displayed.
➣
When select the “Mode” to “Custom”, the “Adjust” menu is
displayed.
4 To adjust the... Press the...
◆ Color tone ◆ + or – button.
Result: You select the required option
(Normal, Warm1/2, Cool1/2).
◆ Contrast ◆ + or – button.
◆ Brightness Result:
The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
5 When you are satisfied with the settings, press the TV button, or
press the MENU button repeatedly to return to normal viewing.
➣
The television has an “automatic degaussing” system that
is activated if magnetic interference is present. To degauss
the television screen, switch power off by pressing the
“POWER ” (ON/OFF) button on the front panel (refer to
“Automatic Degaussing To Remove Colour Patches” on
page 37).
➣
If you make any changes to the “Adjust” settings, the
picture standard is automatically switched to “Custom”.
Select Enter Exit
Picture
Mode Custom
Adjust
Digital NR : Off
Tilt : 0
Select Adjust Exit
Adjust
Color tone : Normal
Contrast : 100
Brightness : 50
Sharpness : 50
Color : 50
Contrast 100
Select Adjust Exit
Adjust
Color tone : Normal
Contrast : 100
Brightness : 50
Sharpness : 50
Color : 50