User manual

Connecting to an Aerial or Cable Television Network

ENG

To view television channels correctly, a signal must be received by

the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

◆ A satellite network

1 In the first three cases, connect the aerial or network input cable to

the 75Ω coaxial socket on the rear of the television.

2 If you are using an indoor aerial, you may need to turn it when

tuning your television until you obtain a picture that is both sharp

and clear.

For further details, refer to:

◆ “Storing Channels Automatically” on page 15.

◆ “Storing Channels Manually” on page 16.

➢

Signal Strength( ) display (Option)

The “ ”(Signal Strength) symbol is displayed by

pressing the “INFO ( )” button. This symbol displays

signal strength for your watching TV channel. The more

signal bar is the better TV gets sensitivity on current

channel.

Rear of the TV

Cable Television

Network

P 4

Mono

AA68-03418A-00Eng_UMG_TM76 6/2/04 11:48 AM Page 10