ELECT COLOUR TELEVISION Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Safety Instructions ENG The following illustrations represent the precautions to be taken when using and moving your television. 10% 75% 35° H H 5° Do NOT expose the television to extreme temperature conditions or to extreme humidity conditions. Do NOT expose the television to direct sunlight. Do NOT expose the television to any liquids. If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
Contents ◆ PREPARING YOUR TELEVISION ■ Safety Instructions ......................................................................................... ■ Caution .......................................................................................................... ■ Front Control Panel ....................................................................................... ■ Connection Panels ........................................................................................ ■ Infrared Remote Control .
Front Control Panel (depending on the model) ENG ➣ Buttons and markings are subject to change.
Connection Panels ENG ☛ This figure shows the Standard Connector-jack panel. The actural configuration on your TV may be different, depending on the model.
Infrared Remote Control ➣ ENG Buttons and markings are subject to change.
Infrared Remote Control (PIP & Game Functions) ➣ Buttons and markings are subject to change.
Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you : ◆ Purchase the television. S ES PR ◆ Find that the remote control is no longer operating correctly. 1 Remove the cover of the remote control by pressing the symbol ( PRESS ) and pulling the cover in the direction of the arrow.
Switching Your Television On and Off ENG The mains lead is attached to the rear of the television. 1 2 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. Press the POWER television. Result: 3 4 The Standby indicator lights up on the front panel. Press the POWER television on.
Plug & Play Feature ENG When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. Plug & Play 1 Ant. Input : Check Select Exit If the television is in Standby mode (red light visible on the television front panel), press the POWER button on the remote control. Result: Auto store Area : ASIA W/EUROPE Search : -/+ 2 Press the ▲ or ▼ button to select required language.
Viewing the Demonstration ENG To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. Picture Mode 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Function” and press the + or – button. 3 Press the ▲ or ▼ button to select the “Demonstration” and press the + or – button. Result: Custom Adjust Digital NR : Off Tilt : LNA : Off Select Enter 0 Exit Each of the menu options is displayed in turn.
Choosing Your Language ENG When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. Picture Mode Custom Adjust Digital NR : Off Tilt : LNA : Off Select Enter 0 Exit 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Function”. 3 Press the + or – button to select the “Language”. 4 Select a particular language by pressing the ▲ or ▼ button repeatedly.
Storing the Channels Automatically ENG You can scan the frequency ranges available on your television and in your area and store all the channels found automatically. Channel The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels. If this is the case, refer to “Sorting the Stored Channels” on page 18.
Storing the Channels Manually ENG When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found. Channel ◆ The number by which you wish to identify each stored channel. Auto store Manual store Add/Erase Fine tune Sort Child Lock Select Enter Exit Channel 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Channel” and press the + or – button. 3 Press the ▲ or ▼ button to select the “Manual store” and press the + or – button.
Storing the Channels Manually (continued...) ENG 6 If you know the number of the channel to be stored, press the... 1. ▲ or ▼ button to select the “Channel”. 2. + button. 3. ▲ or ▼ button to select the “C” (Air channel) or “S” (Cable channel). 4. + button. 5. ▲ or ▼ button to select the channel. ➣ If no sound or abnormal sound... Manual store Color system : Auto Sound system : BG Search : 138MHz Channel : S 6 Prog.No. : P12 Store : ? Select 1. Press the + button. 2.
Skipping Unwanted Channels ENG You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. Channel Auto store Manual store All channels that you do not specifically choose to skip are displayed during scanning. Add/Erase Fine tune Sort Child Lock Select Enter Exit 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Channel” and press the + or – button.
Fine tuning Channel Reception ENG If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to finetune the channel manually. Channel Auto store Manual store Add/Erase Fine tune 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Channel” and press the + or – button. 3 Press the ▲ or ▼ button to select the “Fine tune” and press the or – button.
Sorting the Stored Channels ENG You can exchange the numbers of two channels, in order to: ◆ Modify the numeric order in which the channels have been automatically stored. Channel Auto store ◆ Give easily remembered numbers to the channels that you watch most often. Manual store Add/Erase Fine tune Sort Child Lock Select Enter Exit 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Channel” and press the + or – button.
Changing Channels ENG Once you have stored the channels on your television, you can switch easily from one channel to another using the remote control. To switch... Press... To the next channel . To the previous channel . To another channel The numeric button(s) corresponding to that channel. Pre - Channel Press PRE-CH (Pre Channel button) to switch repeatedly between last two channels displayed. This can be done as many times as required.
Changing the Picture Standard ENG You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available in the order given: Picture Mode Custom ◆ Custom, Standard, Sports, Natural, Mild. Adjust Digital NR : Off Tilt : LNA : Off 0 1 Press the MENU button. Result: Select Enter 2 Press the + or – button to select the “Mode”.
Adjusting the Picture Settings ENG Your television has several settings which allow you to control picture quality: Picture ◆ Color tone, Contrast, Brightness, Color, Sharpness, Tint (NTSC only) 1 Press the + or – button. 3 Press the ▲ or ▼ button to select the “Adjust”, and then press the or – button. ➣ ➣ ➣ : LNA : Off 0 The “Adjust” menu is displayed.
Activating/Deactivating the Digital Noise Reduction Feature ENG If the broadcast signal received by your television is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Picture Mode Custom Adjust Digital NR : Off Tilt : LNA : Off 1 0 Press the MENU button. Result: Select Enter The “Picture” menu is displayed. Exit 2 Press the + or – button. 3 Press the ▲ or ▼ button to select the “Digital NR”.
Changing the Sound Standard (depending on the model) ENG You can select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available in the order given: Sound Mode ◆ Custom, Standard, Music, Movie, Speech. Custom Equalizer 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Sound” and press the + or – button. 3 Press the + or – button repeatedly to cycle through the five choices: Custom, Standard, Music, Movie, Speech.
Adjusting the Sound Settings ENG The sound settings can be adjusted to suit your personal preferences. Sound Mode Custom Equalizer Auto volume : Off Melody : Off Pseudo stereo : Off Select Enter 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Sound” and press the + or – button. 3 Press the ▲ or ▼ button to select the “Equalizer”. Exit ➣ 4 Equalizer R When select the “Mode” to “Custom”, the “Equalizer” menu is displayed. Press the + or – button.
Extra Sound Settings (depending on the model) ENG Sound The following sound settings can be adjusted to suit your personal preferences. ◆ Auto volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. “Auto volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Selecting the Sound Mode (depending on the model) ENG The “S.MODE” button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is automatically preset to either “Dual-I” or “Stereo”, depending on the current transmission.
Adjusting the Volume ENG ◆ Press the + button to increase the volume (cursor moves to the right) ◆ Press the - button to decrease the volume (cursor moves to the left) ➣ ➣ Different Volume levels can be adjusted and saved for each channel. The volume setting is retained: ◆ When you switch the television to standby mode ◆ When you switch the television off using the “POWER ” (ON/OFF) button on the front panel Volume 12 ◆ If there is a power failure.
Settings for Pick 'n' Choose ENG You can save certain custom features depending on preferences for all the 200 Channels and for the external sources. 1 Picture Standard is saved for all the channels individually as Custom, Standard, Sports, Natural or Mild. 2 Sound Standard is saved for all the channels individually as Custom, Standard, Music, Movie or Speech. 3 The status of sound settings, such as Auto Volume, Pseudo Stereo and Turbo Sound are saved as ON/OFF for all the channels individually.
Setting and Displaying the Current Time ENG You can set the television’s clock so that the current time is displayed when you press the “DISPLAY” button. You must also set the time if you wish to use the automatic On/Off timers. ➣ The clock setting will be re-activated when pressing the “ ” (ON/OFF) button on the front panel. Blue screen 2 Press the ▲ or ▼ button to select the “Function” and press the - or + button. 3 Press the ▲ or ▼ button to select the “Time”, and press the - or button. 5 To...
Setting the On/Off Timers, On Time Program and Volume ENG You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel and volume of your choice at the time you select Time Sleep : Off Clock : 11 : 35 am ◆ Switch off automatically at the time you select Timer ➣ REMINDER Select Enter Exit 11:35am Time Timer : On On Time : -- : -- am Off Time : -- : -- am Prog.
Setting the On/Off Timers, On Time Program and Volume Continued..... from page 30 ENG 11:35am Time 9 10 Press the ▲ or ▼ button to select the "Prog. No". Set the program with which you wish the television to be switched on by using the - or +button. 11 Press the ▲ or ▼ button to select the "Volume”. 12 Set the Volume at which you wish the television to be switched on Timer : On On Time : 07 : 00 am Off Time : 06 : 00 pm Prog.
Setting the Reminder ENG You can set Reminder which will be displayed at the time you have selected while watching the television. Time Sleep : Off Clock : 11 : 35 am ➣ Timer REMINDER Select Enter Exit The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on page 29. If you have not yet set the clock, the message “ Set the clock first” is displayed. 1 Press the MENU button.
Setting the Reminder (continued...) ENG 8 Set a message of your choice. MESSAGE EDIT To... 9 10 ------------------ Press the... Select a letter or number ▲ or ▼ button. Move to the next letter + button. Move to the previous letter - button. -----------------ERASE ? Adjust Press the ▲ or ▼ button to move to the next line. Repeat step 8 to continue editing the message.
Setting the Blue Screen Mode ENG If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue screen” mode to “Off”. Function Language : English Time Plug & Play Blue screen : Off 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “Function” and press the - or + button. 3 Press the ▲ or ▼ button to select the “Blue screen”.
Picture In Picture ENG You can display a “Picture-In-Picture screen” within the main picture of TV program or Video input. In this way you can watch or monitor TV program or the Video input from any connected equipment while watching TV or other Video input. For information about connection of other equipment, see pages 38~39. 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “PIP”. 3 Set to “PIP : On” by pressing the - or + button.
Picture In Picture ENG Remote-control functions while “PIP” is “On”: Features Description PIP ON Used to operate ON/OFF function of PIP directly. SWAP Used to interchange the main picture and the sub picture. ➢ When the main picture is in the Video mode and the sub picture is in the TV mode, you might not hear the sound of main picture when pressing the SWAP button after changing the sub picture channel. At this time, reselect the main picture channel.
Enjoying Games (Depending on Model) ENG You can enjoy the game (Chicken Farm), programmed in this TV. 1 Press the GAME button to enter the Game mode. Result: The READY window will be displayed. 2 Press the - or + button to run the game. 3 Move the farmer to catch eggs by using the - or + button. Every time the scores go up, the speed of game becomes faster bit by bit. 4 Every time you catch fifty eggs (i.e., 50, 100, 150 ...), if any broken egg exists, one egg can be restored.
Entering in the Game Zone (Depending on Model) ENG There are two ways of entering the "Game Zone" (a) Function Language : English By the "Game Key" Press the "Game Key" on the Remote control. Time Plug & Play Result: You will enter the "GAME ZONE" Blue screen : Off Demonstration Game Select Enter Game Game Mode (b) By the "Game Menu" 1 Press the MENU button. 2 Press ▲ or ▼ button to select "FUNCTION" and press button.
Adjusting the Game Contrast ENG You can adjust the contrast of the Game as per your requirements. Function Language : English Time 1 Press the MENU button. 2 Press ▲ or ▼ button to select "FUNCTION" and press button. + or – Press ▲ or ▼ button to select "GAME" and press – Plug & Play Blue screen Game Select 3 + or : Off Demonstration Enter Result: Game menu is displayed. Game Game Mode 4 Exit button.
Connecting to the AV-1 or 2 Input/Outputs ➣ ENG ➢ These figures show typical connector-jack panels. The actual configuration on your TV may be different, depending on your model. AV-1 is used for equipment with an RGB output, such as video game devices and video disc players or a VCR.
Connecting to the DVD Input (Option) ENG ➢ The DVD/RCA (AUDIO-L and R) connectors are used for equipment with a DVD output. Rear of TV (MONO) VIDEO L-AUDIO-R MONITOR -OUT INPUT 2 DVD INPUT 1 Connecting to the RCA Input ➢ The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc players and some video game devices.
Connecting Headphones (Option) ENG You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room. 1 Plug a set of headphones into the 3.5 mm mini-jack socket of the television. Result: 2 ➢ The sound is heard through the headphones. When you wish to hear the sound through the speakers again, simply disconnect the headphones. Prolonged use of headphones at a high volume may damage your hearing.
Automatic Degaussing to Remove Colour Patches ENG A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually. If you move the television to a different position and color patches appear on the screen, you must: ◆ Switch the television off by pressing the “POWER ” (ON/OFF) button on the front panel ◆ Unplug the television from the wall socket ◆ Plugin the television.
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
