CTR164TB Series CTR164EB Series CTR164NB Series CTR164DB Series CTR164AB Series CTR164KB Series Ceramic Glass Hob user manual This manual is made with 100 % recycled paper. imagine the possibilities ENGLISH Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register CTR164NB01_XSA_00340A-01-EN.
using this manual Please take the time to read this owner’s manual, paying particular attention to the safety information contained in the following section, before using your appliance. Keep this manual for future reference. If transferring ownership of the appliance, please remember to pass the manual on to the new owner. IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS.
safety instructions The safety aspects of this appliance comply with all accepted technical and safety standards. However, as manufacturers we also believe it is our responsibility to familiarize you with the following safety instructions. ELECTRICAL SAFETY Be sure the appliance is properly installed and grounded by a qualified technician. The appliance should be serviced only by qualified service personnel. Repairs carried out by unqualified individuals may cause injury or serious malfunction.
WARNING SAFETY DURING USE This appliance is to be used only for normal cooking and frying in the home. It is not designed for commercial or industrial use. Never use the hob for heating the room. Take care when plugging electrical appliances into mains sockets near the hob. Mains leads must not come into contact with the hob. Overheated fat and oil can catch fire quickly. Never leave surface units unattended when preparing foods in fat or oil, for example, when cooking chips.
WARNING SEVERE WARNING SIGNS FOR INSTALLATION The installation of this appliance must be performed by a qualified hob service technician trained by the manufacturer. Please see the section “Installing your Hob”. Plug the power cord into the proper wall socket or higher and use the socket for this appliance only. Plug the power plug into the wall socket firmly. In addition, do not use an extension cord. The installation of this appliance must be performed by a qualified technician or service company.
Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor. - If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire. Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord or loose wall socket. - This may result in electric shock or fire. Do not pull or excessively bend the power cord.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. WARNING : Accessible parts may become hot during use. To avoid burns young children should be kept away.
Do not insert fingers, foreign substances or metal objects such as pins or needles into the inlet, outlet, and holes. If foreign substances are inserted into any of these holes, unplug the power plug from the wall socket and contact your product provider or nearest service centre. - Failure to do so may result in electric shock or injury. NEVER fill the container to the top and choose a container that is wider at the top than at the bottom to prevent the liquid from boiling over.
Small amounts of food require shorter cooking or heating time. If normal times are allowed they may overheat and burn. Children should be supervised to ensure that they do not play with the appliance. Any spillage should be removed from the lid before opening and the hob surface should be allowed to cool before closing the lid (Model which has lid only). - This may result in electric shock, fire, problems with the product, or injury. Do not operate the appliance with wet hands.
WARNING CAUTION SIGNS FOR CLEANING The hob should be cleaned regularly and any food deposits removed. Failure to maintain the hob in a clean condition could lead to deterioration of the surface that could adversely affect the life of the appliance and possibly result in a hazardous situation. Take care not to hurt yourself when cleaning the appliance (external/internal). - You may hurt yourself on the sharp edges of the appliance. Do not clean the appliance with a steam cleaner.
contents 12 12 13 14 Regulations and compliance Safety instructions for the installer Connecting to the mains power supply Installing into the countertop PARTS AND FEATURES 16 16 17 17 18 18 18 Cooking zones Control panel Components The key features of your appliance Safety shutoff Residual heat indicator Temperature detection BEFORE YOU BEGIN 19 Initial cleaning HOB USE 20 21 21 22 23 23 24 25 Using suitable cookware Using the touch control sensors Switching the appliance on Select cooking zone a
installing the hob WARNING Be sure the new appliance is installed and grounded only by qualified personnel. Please observe this instruction. The warranty will not cover any damage that may occur as a result of improper installation. Technical data is provided at the end of this manual.
CONNECTING TO THE MAINS POWER SUPPLY Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob. WARNING Shut off power to circuit before connecting wires to circuit. Rated current of appliance (A) Nominal cross-sectional area (mm2) 1N~ > 25 and ≤ 32 ≥ 2.5 2N~ > 10 and ≤ 16 ≥ 1.
INSTALLING INTO THE COUNTERTOP Make a note of the serial number on the appliance rating plate prior to installation. This number will be required in the case of requests for service and is no longer accessible after installation, as it is on the original rating plate on the underside of the appliance. Pay special attention to the minimum space and clearance requirements. Secure the brackets at both sides with the provided screws before mounting the hob onto the brackets. Min.
90 ° x 4 = 490±1 installing the hob ø2 100 100 = installing the hob _15 CTR164NB01_XSA_00340A-01-EN.
parts and features COOKING ZONES Single cooking zone 1950W Single cooking zone 1300W 14 3 8 18 m m m m 14 8 m 3m m m 18 Control panel Single cooking zone 1950W Single cooking zone 1300W CONTROL PANEL Setting control sensor(Slide control) Indicators for heat settings and residual heat Cooking zone selectors “Lock” control sensor “On/Off” control sensor 16_ parts and features CTR164NB01_XSA_00340A-01-EN.
COMPONENTS Installation Brackets Screws THE KEY FEATURES OF YOUR APPLIANCE • • • • • • • • Ceramic glass cooking surface: The appliance has a ceramic glass cooking surface and four rapid - response cooking zones. The hob’s powerful radiant heater elements significantly shorten the amount of time required for the zones to heat up. Touch control sensors: Your appliance is operated using touch control sensors.
SAFETY SHUTOFF If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off. Any residual warmth will be indicated with (for “hot”) in the digital displays corresponding to the particular cooking zones. The cooking zones switch themselves off at the following times.
before you begin INITIAL CLEANING Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner. before you begin WARNING Do not use caustic or abrasive cleaners. The surface could be damaged. before you begin _19 CTR164NB01_XSA_00340A-01-EN.
hob use USING SUITABLE COOKWARE Better pans produce better results. • You can recognise good pans by their bases. The base should be as thick and flat as possible. • When buying new pans, pay particular attention to the diameter of the base. Manufacturers often give only the diameter of the upper rim. • Pots with aluminium or copper bases can cause metallic discolouration on the ceramic glass surface. The discolouration is very difficult or impossible to remove.
USING THE TOUCH CONTROL SENSORS To operate the touch control sensors, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is activated. Ensure that you are touching only one sensor panel when operating the appliance. If your finger is too flat on the panel, an adjacent sensor may be actuated as well. hob use SWITCHING THE APPLIANCE ON 1. Touch the Lock control sensor for approximately 3 seconds. 2.
SELECT COOKING ZONE AND HEAT SETTING 1. For selecting the cooking zone, touch the corresponding cooking zone’s key. 2. For setting and adjusting the power level ( Heat setting selectors ( or ). to ) for cooking, touch the For faster adjustment, keep your finger on the Heat setting selectors ( or ) until the required value is obtained. If more than one sensor is pressed for longer than 10 seconds, will show in the heat setting display. To reset, touch the On/Off control sensor.
SWITCHING THE APPLIANCE OFF To completely switch off the appliance, use the On/Off control Touch the On/Off control sensor. sensor. hob use After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an (for “hot”).
USING THE CHILD SAFETY LOCK You can use the child safety lock to safeguard against unintentionally turning on a cooking zone and activating the cooking surface. Switching the child safety lock on 1. Touch the Lock control sensor for approximately 3 seconds. An acoustic signal will sound as confirmation. approx. 3sec. 2. Touch any heat setting control sensor. will appear in the displays, indicating the child safety lock has been activated Switching the child safety lock off 1.
LOCKING AND UNLOCKING THE CONTROL PANEL At any stage during the cooking process, the control panel, with the exception of the “On / Off” control sensor, can be locked in order to prevent the settings from being changed unintentionally, for example, by wiping over the panel with a cloth. approx. 3sec hob use 1. Touch the lock control sensor for approximately 3 seconds. The indicator light in the lock control sensor will illuminate. The control sensors are now locked. 2.
cleaning and care HOB WARNING Cleaning agents must not come into contact with a heated ceramic glass surface: All cleaning agents must be removed with adequate amounts of clean water after cleaning because they can have a caustic effect when the surface becomes hot. Do not use any aggressive cleaners such as grill or oven sprays, scouring pads or abrasive pan cleaners. Clean the ceramic glass surface after each use when it is still warm to the touch.
Problem Dirt 1. Remove burnt-on sugar, melted plastic, aluminium foil or other materials with a glass scraper immediately and while still hot. WARNING There is a risk of burning yourself when the glass scraper is used on a hot cooking zone: Scratches or dark blemishes on the ceramic glass surface, caused, for example, by a pan with sharp edges, cannot be removed. However, they do not impair the function of the hob. cleaning and care 2. Clean the hob as normal when it has cooled down.
warranty and service FAQS AND TROUBLESHOOTING A fault may result from a minor error that you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case. WARNING Repairs to the appliance are to be performed only by a qualified service technician. Improperly effected repairs may result in considerable risk to the user. If your appliance needs repair, please contact your customer service centre.
What should I do if the display is illuminated? Check for the following: • The control panel is partially covered by a damp cloth or liquid. To reset, press the “On/Off” control sensor. What does it mean when the burner does not glow red? The selected temperature of the cooking zone is maintained by a sensor that cycles the zone on and off, so the surface cooking area will not always glow red. If you select a low heat setting, the heat will cycle on and off more frequently than at higher settings.
technical data TECHNICAL DATA Appliance dimensions Worktop cut - out dimensions Width 575 mm Depth 505 mm Height 55 mm Width 560 mm Depth 490 mm Corner radius 220 - 240 V ~ 50 / 60Hz Connection voltage Maximum connected load power Weight 3 mm 5.5 - 6.5 kW Net 7.5 kg Gross 10.0 kg COOKING RINGS Position Diameter Power Front left 183 mm 1,950W Rear left 148 mm 1,300W Rear right 183 mm 1,950W Front right 148 mm 1,300W 30_ technical data CTR164NB01_XSA_00340A-01-EN.
note CTR164NB01_XSA_00340A-01-EN.
QUESTIONS OR COMMENTS COUNTRY AUSTRALIA NEW ZEALAND CHINA CALL OR VISIT US ONLINE AT 1300 362 603 0800 SAMSUNG (0800 726 786) www.samsung.