מדריך למשתמש

20
EN
Hob Use (Continued)
Switching the child safety lock off
1 Touch the control sensor for approximately 3 seconds
An acoustic signal will sound as conrmation
Timer
There are two ways to use the timer:
Using the timer as a safety shutoff
If a specic time is set for a cooking zone, the cooking zone will shut itself off once this period
of time has elapsed This function can be used for multiple cooking zones simultaneously
Using the timer to count down
The countdown timer cannot be used if a cooking zone has been switched on
Setting the safety shutoff
The cooking zone(s) for which you want to apply the safety shutoff must be switched on
1 Using the timer’s control sensor , select the cooking zone for which the safety shutoff
time is to be set
After the rst active cooking zone is selected, touching the timer’s control sensor will
cause the corresponding indicator to ash slowly
For example, the front left indicator corresponds to the front left cooking zone will ap-
pear in the timer display
The next active cooking zone is selected by touching the timer’s control sensor again 
approx. 3 sec.
CTR364N016_SLI_DG68-00083B-01_EN.indd 20 2012-11-07 �� 11:20:38