User manual

26_ hob use
TIMER
There are two ways to use the timer:
Using the timer as a safety shutoff
If a specific time is set for a cooking zone, the cooking zone will shut itself off
once this period of time has elapsed. This function can be used for multiple
cooking zones simultaneously.
Using the timer to count down
The countdown timer cannot be used if a cooking zone has been switched on.
SETTING THE SAFETY SHUTOFF
The cooking zone(s) for which you want to apply the safety shutoff must be
switched on.
1. Using the timer’s control sensor , select the cooking zone for which the
safety shutoff time is to be set.
After the first active cooking zone is selected, touching the timer’s control
sensor will cause the corresponding indicator to flash slowly.
For example, the front left indicator corresponds to the front left cooking
zone. will appear in the timer display.
The next active cooking zone is selected by touching the timer’s control sensor
again .
2. Use the or timer setting control sensors to set the desired amount of
time, for example, 15 minutes, after which the cooking zone will automatically
switch itself off. The safety shutoff is now activated.
CTR364NC01_XSM-00314A_EN.indd 26 8/7/2553 10:56:42