User Manual

◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
◆ Dolby Virtual (depending on the model)
Pseudo Stereo
These features convert a monaural sound signal into two
identical left and right channels. Once the Dolby
Virtual or Pseudo Stereo is set to On or Off, these
settings apply to the sound effects such as Standard,
Music, Movie, and Speech.
☛
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
English - 6
Sound -
Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Turbo Plus / Dolby Virtual
◆ Mode: Standard/Music
/Movie/Speech/Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
➢
You can select these
options simply by pressing the S.MODE button on
the remote control.
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
continued...
Move Enter Exit
Mode : Standard
√√
Equalizer
√√
Auto Volume : Off
√√
Pseudo Stereo : Off
√√
Turbo Plus : Off
√√
Dolby Virtual : Off
√√
Sound
TV
◆ Digital NR
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting
that may appear on the screen.
◆ Tilt (depending on the model)
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting (-7 to +7).
◆ Mode: Dynamic/
Standard/Movie/Custom
You can select the type of
picture which best
corresponds to your viewing
requirements.
➢
You can select these
options simply by pressing the P. MODE button on
the remote control.
◆ Contrast/Brightness/Sharpness/Colour/
Tint(NTSC only)
The television has several settings which allow you to
control the picture quality.
◆ Colour Tone: Cool2/Cool1/Normal/Warm1/
Warm2
◆ Reset
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
Picture - Mode
Move Enter Return
Mode
TV
Mode : Dynamic
√√
Contrast : 100
Brightness : 50
Sharpness : 75
Colour : 50
Tint : G 50 R 50
Colour Tone : Cool1
√√
Reset
√√
◆ Size
You can select the picture
size which best corresponds
to your viewing
requirements. It is variable
depending on the model.
➢
You can change the
picture size simply by pressing the P.SIZE button on
the remote control.
continued...
Picture -
Size / Digital NR / Tilt
Move Enter Exit
Mode : Dynamic
√√
Size : Normal
√√
Digital NR : Off
√√
Tilt : 0
Picture
TV
AA68-03621A-02Eng_euro 11/16/05 6:26 PM Page 6