User's Manual
《64》
Before contacting a service centre
Camera does not take images when pressing the Shutter button
•There is insufficient memory capacity
→ Delete unnecessary image files
•The memory card has not been formatted
→ Format the memory card (p.57)
•The memory card is exhausted
→ Insert a new memory card
•The memory card is locked
→ Refer to [Card Locked!] error message
•The camera’s power is off
→ Turn the camera power on
•The battery is exhausted
→ Insert fresh batteries.
•Battery is inserted incorrectly with the polarities reversed
→ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
•The camera stopped due to a malfunction
→ Remove /re-insert battery and switch the camera on
The images are unclear
•A picture was taken without setting an appropriate macro mode
→ Select an appropriate macro mode to take a clear image.
•The picture was taken with the subject beyond the flash range
→ Take a picture within the flash range
•The lens is smudged or dirty
→ Clean the lens
The flash does not fire
•Flash off mode has been selected
→ Dis-engage flash off mode
•The camera mode can’t use the flash
→ Refer to the FLASH instruction (p.22)
Incorrect date and time is displayed
•The date and time have been set incorrectly or the camera has adopted the
default settings
→ Reset the date and time correctly
The camera buttons do not operate
•Camera malfunction
→ Remove /re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
•Incorrect memory card format
→ Re-format the memory card
The images don't play back
•Incorrect file name (Violation of DCF format)
→ Do not change the image file name
Colour of image is different to the original scene
•White balance or effect setting is incorrect
→ Select appropriate White balance and effect
Images are too bright
•Exposure is excessive
→ Reset exposure compensation