Service manual

Samsung Electronics4-24
Alignment and Adjustment
7) The OSD shows “OK” after finishing the
adjustment.
14. B-Y NEGATIVE HUE (indoor)
1) Camera mode & 3100˚ K color bar chart
2) Connect a video output terminal to a vec-
torscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "177 XX XX".
4) Ensure that camera picks up image on 3100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the yellow vector is 168˚ .
6) Press the START/STOP(Confirm) button to
store data.
14-b. B-Y NEGATIVE HUE (outdoor)
1) Camera mode & 5100˚ K color bar chart
(3100°K color bar chart + C16 filter)
2) Connect a video output terminal to a vec-
torscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "O70 XX XX".
4) Ensure that camera picks up image on 5100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the yellow vector is 168˚ .
6) Press the START/STOP(Confirm) button to
store data.
7) The OSD shows “OK” after finishing the
adjustment.
13-b. B-Y POSITIVE HUE (outdoor)
1) Camera mode & 5100˚ K color bar chart
(3100°K color bar chart + C16 filter)
2) Connect a video output terminal to a vec-
torscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "O71 XX XX".
4) Ensure that camera picks up image on 5100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the blue vector is 345˚ .
6) Press the START/STOP(Confirm) button to
store data.
7) The OSD shows “OK” after finishing the
adjustment.
YELLOW VECTOR
168 DEG
YELLOW VECTOR
168 DEG
BLUE VECTOR
345 DEG