Fridge/Freezer Instruction Manual
Table Of Contents
- Safety Precautions
- Main Features
- Model Specifications
- Choosing Where to Install Your Fridge/Freezer
- Earthing the Fridge/Freezer
- Preparing Your Fridge/Freezer for Use
- Preparing Your Fridge/Freezer for UseOnce you have chosen the position of your fridge/freezer andchecked that the wall outlet is correctly earthed, proceed asfollows.1 Make sure that the fridge/freezer is unplugged from the wall outlet.2 Wipe the appliance clean inside and out with a soft cloth andwarm, soapy water.3 Allow the fridge/freezer to stabilize for at least one hour beforeplugging it in for the first time.4 Plug the power cord into the appropriate earthed wall outlet.5 Set the refrigerator and freezer temperatures, referring to pages 8and 10, respectively for further instructions.6 Wait for 2-3 hours for the freezer to reach the required temperature,before placing frozen food in the freezer.Adjusting the Feet
- Arranging the Accessories
- Controlling the Refrigerator Temperature
- Storing Food
- Using the Chiller Compartment
- Using the Multi-Purpose Drawer
- Using the Vegetable Bin
- Controlling the Freezer Temperature
- Freezing Food
- Making Ice Cubes (OPTION)
- Cleaning the Fridge/Freezer
- Changing the Light Bulb
- Problems and Solutions
- View of Your Fridge/Freezer
11
TWIST ICE MAKER
Making Ice Cubes
1 Remove the ice cube tray by pulling it towards you.
`
2 Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3 Slide the tray back into the holder, taking care not to spill the
water.
4 Wait until the ice cubes are formed.
Freezing time
: It is recommended that you wait for about one
hour with the temperature set to QUICK
FREEZING for the ice cubes to form.
Removing the Ice Cubes
1 Make sure that the ice cube storage bin is in place under the ice
cube tray. If not, slide it into place.
`
2 Twist one of the levers firmly in the clockwise direction until the
tray twists slightly.
Result
: The ice cubes fall into the storage bin.
3 Repeat Step 2 for the other half of the tray, if necessary.
4 Remove the storage bin by:
◆ Lifting it slightly
◆ Pulling it towards you
MOVABLE ICE TRAY
Making ice cubes
1 Remove the ice cube tray by pulling it towards you.
`
2 Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3 Place it under the freezer shelf or on the freezer shelf .
Removing the ice cubes
To remove ice cubes, hold the tray at its ends and twist gently.
EN
Making Ice Cubes (OPTION)
DA99-00478-EN 2004.3.3 2:39 PM 페이지11