Fridge/Freezer Instruction Manual
Table Of Contents
- Safety Precautions
- Main Features
- Model Specifications
- Choosing Where to Install Your Fridge/Freezer
- Earthing the Fridge/Freezer
- Preparing Your Fridge/Freezer for Use
- Preparing Your Fridge/Freezer for UseOnce you have chosen the position of your fridge/freezer andchecked that the wall outlet is correctly earthed, proceed asfollows.1 Make sure that the fridge/freezer is unplugged from the wall outlet.2 Wipe the appliance clean inside and out with a soft cloth andwarm, soapy water.3 Allow the fridge/freezer to stabilize for at least one hour beforeplugging it in for the first time.4 Plug the power cord into the appropriate earthed wall outlet.5 Set the refrigerator and freezer temperatures, referring to pages 8and 10, respectively for further instructions.6 Wait for 2-3 hours for the freezer to reach the required temperature,before placing frozen food in the freezer.Adjusting the Feet
- Arranging the Accessories
- Controlling the Refrigerator Temperature
- Storing Food
- Using the Chiller Compartment
- Using the Multi-Purpose Drawer
- Using the Vegetable Bin
- Controlling the Freezer Temperature
- Freezing Food
- Making Ice Cubes (OPTION)
- Cleaning the Fridge/Freezer
- Changing the Light Bulb
- Problems and Solutions
- View of Your Fridge/Freezer
Cleaning the Fridge/Freezer
The following parts of your fridge/freezer should be cleaned
regularly to prevent food particles from building up:
◆ Inside and outside surfaces
◆ Doors and door seals
◆ Accessories (shelves, compartments and ice tray)
☛ ALWAYS ensure that:
◆ The door seals are clean
◆ The doors close properly
1 Whenever possible, unplug the fridge/freezer before cleaning it. If
this is not possible, wring any excess moisture out of your sponge
or cloth before cleaning around the:
◆ Lights
◆ Temperature dials
2 Clean the outside surfaces with a soft cloth and warm, soapy
water. Rinse and dry.
3 Remove the accessories, referring to page 7 for further details, if
necessary. Wash them with a soft cloth or sponge and warm,
soapy water. Rinse and dry them.
4 If the refrigerator has an unpleasant smell:
◆ Remove the bio-deodorizer
◆ Soak the catalyst in pure water
◆ Dry it naturally in sunlight
◆ Put it back into position
5 Wipe the evaporation slots in the freezer with a clean, dry, soft
cloth.
☛ DO NOT allow any food particles to clog up these openings
or frozen food to cover them.
6 Wipe the inside of the fridge/freezer with a soft cloth and warm,
soapy water. Rinse and dry.
7 Carefully clean the door seals with a soft cloth and warm, soapy
water. Rinse and dry.
☛ DO NOT damage the seals in any way and make sure that
no food particles on the seals prevent the door from closing
properly as:
◆ The temperature will not be maintained correctly
◆ Electricity will be wasted
12
EN
DA99-00478-EN 2004.3.3 2:39 PM 페이지12