Fridge/Freezer Instruction Manual

Preparing Your Fridge/Freezer for Use
Once you have chosen the position of your fridge/freezer and
checked that the wall outlet is correctly earthed, proceed as
follows.
1 Make sure that the fridge/freezer is unplugged from the wall outlet.
2 Wipe the appliance clean inside and out with a soft cloth and
warm, soapy water.
3 Allow the fridge/freezer to stabilize for at least one hour before
plugging it in for the first time.
4 Plug the power cord into the appropriate earthed wall outlet.
5 Set the refrigerator and freezer temperatures, referring to pages 8
and 10, respectively for further instructions.
6 Wait for 2-3 hours for the freezer to reach the required tem-
perature, before placing frozen food in the freezer.
Adjusting the Feet
To compensate for an uneven floor surface, you can adjust the feet
on the front of the fridge/freezer.
If the fridge/freezer Then turn the...
leans to the...
Left Left foot anti-clockwise until the fridge/
freezer is level.
Right Right foot anti-clockwise until the fridge/
freezer is level.
6
EN
When you store a lot of food in the guards of the doors, it may be
unstable.
In that case, set the front leg parallel to the rear leg.
DA99-00478-EN 2004.3.3 2:39 PM 페이지6