Specifications
Table Of Contents
- DCS 400si General Description
- Table of Contents
- Part 1. System Overview
- Part 2. Hardware Descriptions
- 2.1 Main Cabinet
- 2.2 Expansion Cabinet
- 2.3 Common Control Cards
- 2.4 Interface Cards
- 8 Universal Trunk Card (D8UTK)
- 16 Circuit Trunk Card (D16TK)
- Digital Trunk Card (DTPRI)
- 8 BRI (Basic Rate Interface-D8BRI)
- 24 Digital Line Interface (D24DL)
- 16 Single Line Interface with Message Waiting (D16SL)
- 24 Single Line Interface (D24SL)
- Keyset Daughterboard -DLI (KDb-DLI)
- Keyset Daughterboard -SLI (KDb-SLI)
- Auto Attendant / UCD (DAAUP)
- Miscellaneous Applications Processor 1 (DMAP1)
- 2.5 Power Supply (DPCU)
- 2.6 System Daughterboards
- 2.7 Station Equipment
- Part 3. Specifications
- Part 4. Features
- System Features
- 4.1 System Feature Descriptions
- Account Code Entry
- All Call Voice Page
- Attention Tone
- Authorization Codes
- Auto Attendant
- Automatic Hold
- Background Music
- CADENCE - Integrated Voice Mail
- Call Costing
- Caller Identification
- Call Forwarding
- Call Hold (Exclusive)
- Call Park and Page
- Call Pickup
- Call Waiting / Camp-On
- Centrex / PBX Use
- Chain Dialing
- Class of Service
- Common Bell Control
- Conference
- Computer Telephony Integration (CTI)
- Customer Set Relocation
- Data Security
- Database Printout
- Dialed Numbe Identification Service (DNIS)
- Direct In Lines
- Direct Inward Dialing (DID) T1/Copper
- Direct Inward System Access (DISA)
- Direct Trunk Selection
- Directory Names
- DISA Security
- Distinctive Ringing
- Door Lock Release (Programmable)
- Door Phones
- E & M Tie Lines (T1/Copper)
- Executive Barge-In (Override)
- Executive / Secretary Pooling
- External Music Interfaces
- External Page Interfaces
- Flash Key Operation
- Flexible Numbering
- Ground Start Trunks (T1/Copper)
- Hot Line
- In Group / Out of Group
- Incoming Call Distribution
- Incoming / Outgoing Service
- Individual Line Control
- ISDN Service
- Least Cost Routing
- Live System Programming
- Meet Me Page and Answer
- Memory Protection
- Message Waiting Indications
- Microphone On / Off Per Station
- Music On Hold - Flexible
- Off Premises Extensions (OPX)
- Operator Group
- Overflow
- Paging
- Park Orbits
- Power Failure Transfer
- Prime Line Selection
- Private Lines
- Programmable Line Privacy
- Programmable Timers
- Recalls
- Remote Programming-PC
- Ring Modes
- Ring Over Page
- Single Line Connections
- Speed Dial Numbers (2500)
- Speed Dial by Directory
- Station Hunt Groups (50)
- Station Message Detail Recording (SMDR)
- Station Pair
- Station to Station Restriction
- System Alarms
- System Maintenance Alarms
- System Directory
- Tenant Service (2)
- Toll Restriction
- Toll Restriction Override
- Tone or Pulse Dialing
- Traffic Reporting
- Transfer
- Trunk Groups (49)
- Uniform Call Distribution (UCD)
- Universal Answer
- Voice Mail Integration
- Walking Class of Service
- Station Features
- 4.2 Station Feature Descriptions
- Add-On Modules
- 32 AOM
- 64 Button Module
- Appointment Reminder
- Automatic Hold
- Automatic Privacy
- Background Music
- Busy Station Callback
- Busy Station Indications (BLF)
- Call Forwarding
- Call Log
- Call Pickup
- Direct Station Selection (DSS)
- Do Not Disturb (Programmable)
- Door Lock Release
- Exclusive Hold
- Group Listening
- Headset Operation
- Hearing Aid Compatible
- Line Queuing with Callback
- Line Skipping
- Loud Ringing Interface
- Manual Signalling
- Message Waiting Light / Indication
- Mute Microphone / Handset
- Off-Hook Ringing
- Off-Hook Voice Announce (Standard)
- Off-Hook Voice Announce (Executive)
- One Time Do Not Disturb
- One Touch Dialing Keys
- On-Hook Dialing
- Privacy Release
- Programmable Keys
- Programmed Station Messages
- Protection From Barge-In
- Pullout Directory Tray
- Pulse to Tone Switchover
- Redial
- Remote Hold
- Ring Modes
- Ringing Preference
- Speakerphone
- Station Lock
- Tri-Colored Lights
- Volume Settings
- Wall-Mountable Keysets
- Display Features
- 4.3 Display Feature Descriptions
- Account Code Display
- Call Duration Timer
- Call for Group Identification
- Call Processing Information
- Caller ID/ANI Information
- Calling Party Name
- Calling Party Number
- Conference Information
- Date and Time Display
- Dial by Name
- Dialed Number
- Enhanced Station Programming
- Identification of Recalls
- Identification of Transfers
- Message Waiting Caller Number
- Outside Line Identification
- Override Identification
- Programmed Message Display
- Soft Keys
- Stopwatch Timer
- Text Messaging
- UCD Supervisor Displays
- Sample Displays
- Sample Caller ID Displays
- Sample UCD Displays
- 4.4 Sample SMDR Printout (Without Caller ID)
- 4.5 Sample SMDR Printout (With Caller ID and Call Cost)
- 4.6 Sample UCD Report
- 4.7 UCD Call Statistics Overview
- 4.8 UCD Agent Statistics Overview
- 4.9 Sample Traffic Report
- 4.10 Traffic Report Overview
- 4.11 Sample Alarm Report
- Part 5. General User Information
CONTENTS
4.1.9
NOTE: This feature requires individual trunk buttons and auto-hold must be en-
abled.
COMPUTER TELEPHONY INTEGRATION (CTI)
Computer Telephone Integration (CTI) allows integration between the DCS 400si
and a personal computer system (PC) or a local area network (LAN). Caller ID or
ANI service is required for TAPI and TSAPI inbound call applications that use the
CID/ANI information to display computer records in conjunction with the presenta-
tion of the call to the station on the DCS 400si. TAPI and TSAPI are described
below.
TAPI
Jointly developed by Intel and Microsoft, TAPI (Telephony Applications Program-
ming Interface) delivers telephony features to the Windows desktop. TAPI is an
open application interface (OAI) protocol that supports First Party Call Control. A
Computer Telephony Module (CTM) is required to connect any keyset to a per-
sonal computer running Windows 3.1 or Windows 95. The number of CTMs that
can be installed on a system is only limited to the number of keyphones. The fea-
tures and functionality of the 400si keyset are not changed.
TSAPI
Telephony Services Application Programming Interface (TSAPI) was developed by
Novell and AT&T and is the method of integrating the DCS 400si system to a com-
puter. TSAPI is a LAN based solution allowing computers to communicate directly
to the telephone system over the network system. This establishes a logical con-
nection rather than a physical connection between telephone and computer. It elimi-
nates the cost and administrative overhead of connecting every PC to a desktop
phone. It emphasizes third-party call control. (Example: calls can be tracked as
they are transferred, making it more suited to large office applications). TSAPI can
emulate first-party type call control for the 400si system, rather than from the tele-
phone as TAPI does. For example, to make a call the 400si, rather than the tele-
phone would dial the phone number, and the call would be then transferred to the
telephone. Novell Telephony Services 2.1 or higher specifies the data communica-
tions link between the Novell Netware file server running the Netware Telephony
Services NLM and the Samsung 400si. The physical connection from the Novell
Telephony server to the DCS 400si is an EIA-232 connection via a Samsung Serial
Interface Module (SIM).
CUSTOMER SET RELOCATION
Customer Set Relocation allows the customer to exchange or swap similar stations
in the 400si without wiring changes. All individual station assignments such as
trunk ring, station group, station COS, station speed dial, button appearances, call
forwarding, etc. will follow the Customer Set Relocation program.