Specifications

CONTENTS
4.1.12
E & M TIE LINES (T1/COPPER)
Your office can be connected to another office with a tie line. Use it to make calls to
stations in the other system. If programming allows, you can access lines in the
other system to make outside calls. Tie line calls can be put on hold, transferred
and conferenced in the same way as are other outside calls. Users accessing the
tie line from the other system can get a line in your system and make outgoing
calls. These calls can be controlled by assigning a dialing class to the tie line. Your
local telephone company may use E&M tie lines to provide DID service. In this
case these tie lines can be programmed to follow the DID translation table.
See
DID. Translated E & M tie line calls have Day and Night routing capabilities.
EXECUTIVE BARGE-IN (OVERRIDE)
The feature allows specially programmed stations with a barge-in key to override
the automatic privacy of another station or monitor an outside trunk. Programming
allows barge-in with or without a warning tone. Stations may also be programmed
as “secure” so that they cannot be barged-in on.
WITH WARNING TONE
When the barge-in with tone option is set, the barging-in keyset has its microphone
on and the barged-in on station receives an override display. A double burst of
warning tone sounds and repeats every ten seconds. This feature does not work
from single line sets.
WITHOUT WARNING TONE
When the barge-in without tone option is set, the barging-in keyset has its micro-
phone muted and the barged-in on station does not receive an override display.
This feature does not work from single line sets.
TRUNK MONITOR or SERVICE OBSERVING
This feature allows the user who barged-in to retain the trunk call after the original
station has hung up.
WARNING: BARGE-IN WITHOUT TONE MAY VIOLATE STATE OR FEDERAL
LAWS CONCERNING THE RIGHT TO PRIVACY. SAMSUNG TELECOMMUNI-
CATIONS AMERICA IS IN NO WAY RESPONSIBLE FOR THE POSSIBLE MIS-
USE OF THIS FEATURE.
EXECUTIVE/SECRETARY POOLING
Each keyset may be defined as a BOSS or a SECRETARY in system program-
ming. Each BOSS can have up to four SECRETARIES and each SECRETARY
can have up to four BOSSES. These arrangements are known as executive/secre-
tary pools. There can be multiple pools in a system. When a BOSS is in DND, all
calls to the BOSS ring the first SECRETARY assigned to that BOSS; if that SEC-
RETARY is busy, the call hunt to the next available SECRETARY assigned to that
BOSS. If the SECRETARY must communicate with the BOSS while he/she is in
DND, pressing the corresponding BOSS button on the SECRETARY’s keyset re-