Specifications

CONTENTS
CALLING PARTY NAME
For intercom calls, LCD 24B and LCD 12B keysets show the calling party’s name
before answering. The names must be stored in the system directory list and can
be up to 11 characters long.
CALLING PARTY NUMBER
When an intercom call is received, all display stations show the calling party’s ex-
tension number before the call is answered.
CONFERENCE INFORMATION
When a conference is set up, each extension and outside line number is displayed
at the controlling station when it is added. When a station is added, its display
shows [Conf with xxx] alerting the user that other parties are on the line.
DATE AND TIME DISPLAY
In the idle condition, the current date and time are conveniently displayed. Display
keysets can have a 12 or 24 hour clock in either the ORIENTAL or WESTERN
display format with information shown in upper case or lower case letters.
DIAL BY NAME
Each station and speed dial number can have an associated directory name. Any
station or speed dial number can be selected by scrolling alphabetically through a
directory list. There are three directories:
1. System wide speed dial list
2. Personal speed dial list
3. Station directory list
This online “phone book” allows display keyset users to look up and dial any speed
dial number or station in seconds.
DIALED NUMBER
When an outside call is made, digits are displayed as the user dials them. If the
display indicates an incorrect number was dialed, the user can quickly hang up
before billing begins.
ENHANCED STATION PROGRAMMING
Personal programming options are easier to select and confirm with the help of the
display.
IDENTIFICATION OF RECALLS
Hold recalls and transfer recalls are identified differently than other ringing calls.
Hold recalls indicate the recalling line or station number and the associated name.
Transfer recalls indicate the recalling line or station and where it is coming from.
4.3.3