Specifications
Table Of Contents
- DCS 400si General Description
- Table of Contents
- Part 1. System Overview
- Part 2. Hardware Descriptions
- 2.1 Main Cabinet
- 2.2 Expansion Cabinet
- 2.3 Common Control Cards
- 2.4 Interface Cards
- 8 Universal Trunk Card (D8UTK)
- 16 Circuit Trunk Card (D16TK)
- Digital Trunk Card (DTPRI)
- 8 BRI (Basic Rate Interface-D8BRI)
- 24 Digital Line Interface (D24DL)
- 16 Single Line Interface with Message Waiting (D16SL)
- 24 Single Line Interface (D24SL)
- Keyset Daughterboard -DLI (KDb-DLI)
- Keyset Daughterboard -SLI (KDb-SLI)
- Auto Attendant / UCD (DAAUP)
- Miscellaneous Applications Processor 1 (DMAP1)
- 2.5 Power Supply (DPCU)
- 2.6 System Daughterboards
- 2.7 Station Equipment
- Part 3. Specifications
- Part 4. Features
- System Features
- 4.1 System Feature Descriptions
- Account Code Entry
- All Call Voice Page
- Attention Tone
- Authorization Codes
- Auto Attendant
- Automatic Hold
- Background Music
- CADENCE - Integrated Voice Mail
- Call Costing
- Caller Identification
- Call Forwarding
- Call Hold (Exclusive)
- Call Park and Page
- Call Pickup
- Call Waiting / Camp-On
- Centrex / PBX Use
- Chain Dialing
- Class of Service
- Common Bell Control
- Conference
- Computer Telephony Integration (CTI)
- Customer Set Relocation
- Data Security
- Database Printout
- Dialed Numbe Identification Service (DNIS)
- Direct In Lines
- Direct Inward Dialing (DID) T1/Copper
- Direct Inward System Access (DISA)
- Direct Trunk Selection
- Directory Names
- DISA Security
- Distinctive Ringing
- Door Lock Release (Programmable)
- Door Phones
- E & M Tie Lines (T1/Copper)
- Executive Barge-In (Override)
- Executive / Secretary Pooling
- External Music Interfaces
- External Page Interfaces
- Flash Key Operation
- Flexible Numbering
- Ground Start Trunks (T1/Copper)
- Hot Line
- In Group / Out of Group
- Incoming Call Distribution
- Incoming / Outgoing Service
- Individual Line Control
- ISDN Service
- Least Cost Routing
- Live System Programming
- Meet Me Page and Answer
- Memory Protection
- Message Waiting Indications
- Microphone On / Off Per Station
- Music On Hold - Flexible
- Off Premises Extensions (OPX)
- Operator Group
- Overflow
- Paging
- Park Orbits
- Power Failure Transfer
- Prime Line Selection
- Private Lines
- Programmable Line Privacy
- Programmable Timers
- Recalls
- Remote Programming-PC
- Ring Modes
- Ring Over Page
- Single Line Connections
- Speed Dial Numbers (2500)
- Speed Dial by Directory
- Station Hunt Groups (50)
- Station Message Detail Recording (SMDR)
- Station Pair
- Station to Station Restriction
- System Alarms
- System Maintenance Alarms
- System Directory
- Tenant Service (2)
- Toll Restriction
- Toll Restriction Override
- Tone or Pulse Dialing
- Traffic Reporting
- Transfer
- Trunk Groups (49)
- Uniform Call Distribution (UCD)
- Universal Answer
- Voice Mail Integration
- Walking Class of Service
- Station Features
- 4.2 Station Feature Descriptions
- Add-On Modules
- 32 AOM
- 64 Button Module
- Appointment Reminder
- Automatic Hold
- Automatic Privacy
- Background Music
- Busy Station Callback
- Busy Station Indications (BLF)
- Call Forwarding
- Call Log
- Call Pickup
- Direct Station Selection (DSS)
- Do Not Disturb (Programmable)
- Door Lock Release
- Exclusive Hold
- Group Listening
- Headset Operation
- Hearing Aid Compatible
- Line Queuing with Callback
- Line Skipping
- Loud Ringing Interface
- Manual Signalling
- Message Waiting Light / Indication
- Mute Microphone / Handset
- Off-Hook Ringing
- Off-Hook Voice Announce (Standard)
- Off-Hook Voice Announce (Executive)
- One Time Do Not Disturb
- One Touch Dialing Keys
- On-Hook Dialing
- Privacy Release
- Programmable Keys
- Programmed Station Messages
- Protection From Barge-In
- Pullout Directory Tray
- Pulse to Tone Switchover
- Redial
- Remote Hold
- Ring Modes
- Ringing Preference
- Speakerphone
- Station Lock
- Tri-Colored Lights
- Volume Settings
- Wall-Mountable Keysets
- Display Features
- 4.3 Display Feature Descriptions
- Account Code Display
- Call Duration Timer
- Call for Group Identification
- Call Processing Information
- Caller ID/ANI Information
- Calling Party Name
- Calling Party Number
- Conference Information
- Date and Time Display
- Dial by Name
- Dialed Number
- Enhanced Station Programming
- Identification of Recalls
- Identification of Transfers
- Message Waiting Caller Number
- Outside Line Identification
- Override Identification
- Programmed Message Display
- Soft Keys
- Stopwatch Timer
- Text Messaging
- UCD Supervisor Displays
- Sample Displays
- Sample Caller ID Displays
- Sample UCD Displays
- 4.4 Sample SMDR Printout (Without Caller ID)
- 4.5 Sample SMDR Printout (With Caller ID and Call Cost)
- 4.6 Sample UCD Report
- 4.7 UCD Call Statistics Overview
- 4.8 UCD Agent Statistics Overview
- 4.9 Sample Traffic Report
- 4.10 Traffic Report Overview
- 4.11 Sample Alarm Report
- Part 5. General User Information
CONTENTS
1.5
processor (ECP) is coupled with the primary processor expanding the system to 512 PCM
channels. Secondary processors are located on station and trunk cards. The tertiary level
of processing is done in the keysets. The digital keysets use a Hitachi H8 processor for
data communication within the DCS 400si.
1.4 PROGRAMMING
The DCS 400si is a self-configuring system. This means that immediately after applying
power, the DCS 400si reads the types and locations of all installed cards and telephones
and assigns default data to them. This data provides for system operation minutes after
applying power. All trunks and stations are assigned according to the default numbering
plan. This numbering plan is flexible and may be changed to suit customer requirements.
The installing technician customizes this default data to meet the end user’s require-
ments.
The system can be programmed from any LCD display keyset without interrupting system
operation. There are three levels of programming: TECHNICIAN, CUSTOMER AND STA-
TION. The technician level has access to all programs and can allow the customer access
to system programs as needed. Technician and customer access are controlled by differ-
ent security passcodes and access procedures. Station programming allows the individual
station user to set various options applicable to their station only. Keyset users have more
options than single line users. Each station user has their own passcode. The Customer
or Technician level programming can also be used to set individual station options.
The DCS 400si also provides for the use of a proprietary windows based computer pro-
gram called PCMMC. This permits a technician to program the system using a personal
computer. PCMMC can be used on-site to modify the customer database or to download
(save) the entire customer database to a file. This file can then be saved as a backup and
can be uploaded when required to restore the database.
Through the use of modems, PCMMC can access a DCS 400si system remotely (off-site)
to make database changes or perform uploads or downloads of the customer database
as if the technician were on-site.