Specifications

CONTENTS
PULLOUT DIRECTORY TRAY
A pullout directory tray is conveniently located beneath all keysets. It is used to
record station directory names and speed dial numbers.
PULSE TO TONE SWITCHOVER
When dialing a number on a dial pulse network, a station user can dial # and the
DCS system will begin to send DTMF.
REDIAL
There are three types of external redial available to all station users. Each type can
redial up to a maximum of 18 digits.
l AUTO RETRY—When an outside number is dialed and a busy signal is received,
the auto retry feature can be used to reserve the outside line and automatically
redial the number for a programmable number of attempts.
l LAST NUMBER—The most recently dialed number on a C.O. line is saved and
may be redialed by pressing the redial key or dialing the LNR access code.
l SAVE NUMBER—Any number dialed on a C.O. line may be saved for redial at
a later time.
REMOTE HOLD
When you wish to place a call on hold at another station, press TRSF and dial the
station number (or press the appropriate DSS key). Press the HOLD key. This will
place the call on system hold on an available CALL button or Line Key at the
remote station.
RING MODES
Each keyset user can select one of three distinct ways to receive intercom calls.
The phone can automatically answer on the speakerphone, voice announce through
the speaker or receive ringing. When the ring mode is selected, keyset users can
choose one of eight distinct ring tones. Forced Auto Answer is invoked by the
calling station and is controlled by the calling station’s class of service.
RINGING PREFERENCE
Lifting the handset or pressing the speaker button automatically answers a call
ringing at the keyset. Using this method, users are assured of answering the oldest
call first. When ringing preference is turned off, the user must press the flashing
button to answer. Users may answer ringing lines in any order by pressing the
flashing button.
SPEAKERPHONE
LCD 24B, STD 24B, LCD 12B and Basic 12B keysets have a built-in speakerphone.
The speakerphone enables calls to be made and received without the use of the
handset.
4.2.6