User guide

CUSTOMER SET RELOCATION

This program is used to swap information associated with two stations. All as-

signments such as trunk ring, station group, station COS, station speed dial

etc. will follow this program. 12 button keysets and 24 button keysets can be

exchanged. Basic 7 button keysets can be exchanged with Basic 7 button key

sets. Single line stations numbers can be exchanged. If incompatible set types

are selected the DCS 50si system will provide an ERROR: NO MATCH mes-

sage. 12 button and 24 button key assignments should be taken in consider-

ation when relocating these type of sets. The table below shows which phones

can be switched with each other.

NOTE: In order to use this program it must first be activated by a technician.

Please see your installing company to have this done if you wish to use this

program.

CUSTOMER SET RELOCATION ALLOW TABLE

PROGRAM KEYS

UP & DOWN - Used to scroll through options.

KEYPAD - Used to enter selections.

SOFT KEYS - Move cursor left and right.

SPK - Used to store data and advance to next program.

HOLD - Used to clear previous entry.

ANS/RLS - Used to select ALL.

L/SNTB721CSB21DCL42CSB42DCLMOAMB46

L/SSEYONONONONONONON

NTB7ONSEYONONONONONON

21CSBONONSEYSEYSEYSEYONON

21DCLONONSEYSEYSEYSEYONON

42CSBONONSEYSEYSEYSEYONON

42DCLONONSEYSEYSEYSEYONON

MOAONONONONONONSEYON

MB46ONONONONONONONSEY

ACTION DISPLAY

1. Press TRSF 315 SET RELOCATION

Display shows EXT _ EXT

2. Enter first station number (e.g., 202) SET RELOCATION

Press RIGHT soft key to move cursor EXT 202 EXT _

3. Enter second station number (e.g., 210) SET RELOCATION

Press RIGHT soft key to enter data EXT 202 EXT 210

4. Display will return to STEP 1 SET RELOCATION

Go to STEP 2 EXT _ EXT

OR press TRSF to store and exit

programming.