Installation manual

2.4 Expansion Cabinet Installation
Expansion Cabinet is attached to Basic KSU using the following procedure.
a) Switch OFF the power and remove the covers of both Basic KSU and
Expansion Cabinet.
b) Using an appropriate tool, carefully remove the two blanking plates on the
right side of Basic KSU for connection route.
A is for MDF cable and B is for signal and power cable. (See Figure 2-2)
<FIGURE 2-2> RIGHT SIDE VIEW OF BASIC KSU
DCS Compact II INSTALLATION MANUAL Chapter 2. Installing Basic KSU and Expansion Cabinet
2 - 4
A
B