Unit installation

PROSTAR DCS COMPACT INSTALLATION
TECHNICAL MANUAL PART 4 NOVEMBER 1997
4–2
4.4 DEFAULT TRUNK AND STATION NUMBERING
Upon initial power up, the CPU reads each slot for the existence of a card and identifies
the type of card. It stores this as the default configuration.
The system assigns trunk numbers beginning with 701 and continues to 704 for a basic
KSU or to 710 for a fully equipped KSU.
Station numbers are assigned in the same manner. The lowest station is assigned
station number 201 and continues to 208 for a basic KSU or to 222 for a fully equipped
KSU. Keyset daughterboards are assigned numbers beginning with 301 and continue
to 310. Default data assigns the keyset in the lowest port to the operator group and all
trunks ring that station until the default is changed.
Station and trunk numbers can be changed, rearranged and reassigned as needed
using MMC 724.
HOME
PAGE
Table of
Contents