Unit installation

PROSTAR DCS COMPACT INSTALLATION
TECHNICAL MANUAL PART 2 JUNE 1995
2–4
2.5 MDF CABLING
All connections to the DCS COMPACT system are made by way of a customer-
provided main distribution frame (MDF). The KSU and expansion kit are each
connected to the MDF using a 25 pair female amphenol-type cable. These cables can
be routed into the KSU cabinet from below.
Label each cable to correspond with the connector numbers (see Figure 2–4). Label
each 66 terminating block with the same connector number with which the cable is
labeled.
Use one pair twisted jumper wire to cross-connect stations or lines to their associated
port.
HOME
PAGE
Table of
Contents