User guide

TEL E C O M
FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK
Recall Dial Tone

same line.
Note: If the NEW key does not appear on your keyset, the RECALL key may be programmed to recall dial
tone.
Sending a Flash
While on an outside call, press the programmed FLASH key to send a flash to the telephone company.
This is required for some custom calling features or CENTREX use (e.g. for nuisance calls).
Busy Line Queuing With Callback
If you receive a busy signal when you are selecting an outside line, this means that the line or group of
lines is busy.
1. Press the CALLBACK key or dial 44. You will hear confirmation tone. When the line becomes free the
system will call you back.
2. Lift the handset or press the ANS/RLS key to answer, wait for dial tone and dial the telephone number
or speed dial number again.
Note:
                  
CALLBACK key will light.
ure has been turned off, you must first lift the handset or press the SPEAKER key
before dialling.